AZBOX HD Emu [Archive]

istvan

20-07-09, 06:30

First of all, I would like all users to read Thread started by the The_Ripper for which all Thanks goes for this great work.

The_Ripper Thread

http://www.satdudez.org/forum/showthread.php?t=112731

I will try just to explain on one place how to install and run native CCcam 2.1.1 ( CCcam.mips ) on AzBox HD Elite and Premium.

First of all, download from this thread file, called azbox-cccam-2-1-1-working.rar . Unpack it on Your desktop.

Use FileZilla FTP or any FTP manager to connect on You AzBox HD device.

Enter in /EMU folder and create directory lib , so You will have /EMU/lib .

Now transfer this files to that directory from just downloaded archive from this thread :

CCcam.mipsel , ld.so.1, libc.so.6, libcrypt.so.1, libdl.so.2, libdvbapi.so, libgcc_s.so.2, libm.so.6, libnss_dns.so.2, libnss_files.so.2, libnss_hesiod.so.2, libnss_nis.so.2, libnss_nisplus.so.2, libpthread.so.1, libresolv.so.2, libstdc++.so.7 . ( It means, copy all files except file dvbapi_module from my archive ).

Please put CHMOD 755 on all files which You copied to /EMU/lib directory !!! This is very important !!!

Prepare Your CCcam.cfg file and copy it, inside of /EMU/lib directory.

Now, You have to go inside of /EMU/OpenXCAS directory and there You should create new directory called dvbapiCAS, so You will have /EMU/OpenXCAS/dvbapiCAS . Put inside of that folder file called dvbapi_module and give CHMOD 755 to that file.

Also it is important that You create inside of that /EMU/OpenXCAS/dvbapiCAS file named as openxcas.conf which should contain this :

[module]
name = dvbapiCAS
daemon = dvbapi_module
version = 1.00

Now when all is settled You can start it.

But keep in mind, first start CCcam and then start dvbapi_module .

Also keep in mind that all other EMU's are dissapled in OpenXCAS panel Camd activation and priority settings.

To start CCcam use this command :

LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg &

And to start dvbapi_module

Go inside of /EMU/OpenXCAS/dvbapiCAS

and type this command:

./dvbapi_module

The best combination is to start 2 telnet sessions to Your AzBox HD, on first session run CCcam on seccond start dvbapi_module.

Enjoy.

Thanks to The_Ripper .

Automatic Running ( no need to start manually ) :

If You want to run CCcam 2.1.1 from OpenXCAS Panel , Camd Activation and Priority .

First You have to copy 2 files , dvbapi.sh and openxcas.conf to /EMU/OpenXCAS/dvbapiCAS .

Also extract arhive module.rar and copy module.seq file to /EMU/OpenXCAS .

Files are attached to this post

Then, go in OpenXCAS Panel on Your AzBox HD, and choose Camd activation and priority and You can start and restart CCcam 2.1.1 from there as dvbapiCAS .

valerica

20-07-09, 16:32

Pot confirma ca varianta cccamd mips de la 7025 compilata sa ruleze sub debian functioneaza perfect - la fel ca pe un dm original , cu multi cline , server , webinf , etc . La ora asta cred ca cei de la dmm sunt maro in anumite zone , lol .

M-MAN

20-07-09, 16:41

Daca ar fi o varianta sa mearga si anumite carduri NDS ca si zaharosul, in cititorul intern, ar fi super.
Am citit undeva este recomandata folosirea newcs + cccam pt carduri locale, dar ultimul newcs pt Azbox, din cate stiu, nu stie inca sa foloseasca cititorul intern.
Stie cineva o alta solutie pt local zaharos pe Azbox?

zildan

20-07-09, 16:45

Rabdare! Se vor adapta si driverele de SCI.

valerica

20-07-09, 19:30

Daca ar fi o varianta sa mearga si anumite carduri NDS ca si zaharosul, in cititorul intern, ar fi super.
Am citit undeva este recomandata folosirea newcs + cccam pt carduri locale, dar ultimul newcs pt Azbox, din cate stiu, nu stie inca sa foloseasca cititorul intern.
Stie cineva o alta solutie pt local zaharos pe Azbox?

Stie newcs sa lucreze sci , la mine merge cardul de tvr perfect cu newcs si mgcamd .
Probez acum cu newcs + cccam ....

licapavel

20-07-09, 23:37

Regula 12

As vrea sa stiu si eu daca ai reusit sa pui cardul de tvr cu cccam si newcs

valerica

21-07-09, 01:01

licapavel

21-07-09, 20:42

Nu stiu, de aceea intreb:

Cardul TVR nu se poate citi sub cccam cu ajutorul unui CAM VIACCESS ROSU?

valerica

21-07-09, 21:26

Merge pe cam via , dar nu poti face share . Daca ai azbox , de ce sa folosesti un cam cand funct. cu newcs + mgcamd ?

jimbo_may

22-07-09, 15:25

Hi all

I am new with azbox. I just bought one and i am trying to follow these steps. I am having issues as i dont see /EMU/OpenXCAS folder. There is /EMU folder but no OpenXCAS subfolder. Why???

licapavel

22-07-09, 17:11

Nu am, dar vreau sa-mi cumpar un azbox si sa fie o alternativa buna la DM 800(putin mai lipseste). Pana atunci ma documentez si astept cu nerabdare orice noutate in legatura cu azbox. ..revenind:
O fi margand TVR cu mgcamd dar treaba e pe jumatate rezolvata.
Ideea e sa pot pune cardul pe sh_are . si sa fie pe cccam. altfel n-am facut nimic.

P.S.....sper sa nu fiu penalizat ca am incalcalcat regula 12. Care mi se pare mai degraba o sugestie decat o regula

valerica

22-07-09, 17:53

Az alternativa pentru dm800 ? Ce face in + dm800 ? Invers iti pot spune ce nu face 800 si nu o sa faca niciodata comparativ cu az pentru ca nu are cum d.p.d.v hardware (800 e net inferior fata de az) .

ionutc

22-07-09, 22:44

reciproca e si ea valabila adica in partea de share azbox nu o sa faca ce face dm800 .......iar ca soft az box inca este foarte beta....

ripper

02-08-09, 05:39

Inainte sa se instaleze CCcam 2.1.1 trebuie instalat debian-ul ?

Am citit ca pentru CCcam 2.0.11 trebuie sa avem instalat debian pe receptor deci ma gandesc ca si la versiunea 2.1.1 este la fel.

Ce versiune de firmware recomandati pentru AZBox HD Elite?

Merci.

valerica

02-08-09, 07:44

Pentru 2.1.1 nu e nevoie de debian - faci exact cum a scris istvan in #1 . E bine sa ai un s/w de la 2371 in sus .

ripper

02-08-09, 08:24

merci, dupa ce apuc sa il testez revin cu detalii :).

licapavel

06-09-09, 18:36

Cine ma poate ajuta si pe mine? De 2 zile ma chinui cu AZboxul. Am 2 mari necunoscute: 1. AM reusit sa instalez CCcam 2.1.1 si sa-l pot porni din telecomanda doar restartand dvbapiCAS. Am gasit un script care face asta:
#!/bin/sh killall -9 dvbapi_module killall -9 ld.so.1 LD_PRELOAD=/EMU/lib/libdvbapi.so /EMU/lib/ld.so.1 --library-path /EMU/lib/ /EMU/lib/CCcam.mipsel -dv -C /EMU/lib/CCcam.cfg & sleep 5 cd /EMU/OpenXCAS/dvbapiCAS ./dvbapi_module & Imi merg liniile de sharing, le-am verificat pe calculator scriind in browser: ipazbox:16001. Dar daca dau refresh la pagina constat ca situatia cardurilor se schimba de la un refresh la altul. Adica daca un per avea 500 carduri , dupa refresh constat ca are 0 (zero). Alta problema ar fi ca nu-mi deschide programele HD. Cele SD imi merg cu mici intreruperi. 2. Nu vrea sa deschida TVR de pe 16 est, cartela local cu newcs + mgcamd. Voi ce versiuni folositi? Poate astea noi nu mai merg decat prin phoenix. Si unde pot vedea daca newcs imi citeste cardul, daca mgcamd comunica cu newcs?

valerica

06-09-09, 22:19

1.Cand lucrezi cu dvbapiCAS sa ai numai acest emu selectat in plug-ins ; pe un canal HD restart dvbapi si dupa ce apare mes."scrambled" dai pe alt canal al aceluiasi provider - merge daca serverul are cardul valid ; intreruperi - incearca pe 1 s/w mai vechi de 3177/3180 , de ex. pe 2371 ; la server apar 0 carduri - probabil probleme conexiune internet sau server .
2.Pune in newcs.xml :

<newCSconfig>
<readers name="Card Readers">
<device>
<name>upper</name>
<type>azbox</type>
<node>/dev/scard</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>No</blockga>
<newcamd_port>20000</newcamd_port>
<autosid>no</autosid>
<carddetect>yes</carddetect>
<priority>hard</priority>
<PTShandshake>no</PTShandshake>
<mhz>357</mhz>
<boxkey>79FDC0E18D278138</boxkey>
<rsa>9ED52515321F04BCF7772151149D6895154B559A8D825A4E7D711A9FAFD5C66BF64689501B254DF1832F754C21095379CF97 B4E5BE6E0F1C9CEBF0A0E91D5ACD</rsa>
</device>
</readers>
<xmlserver>
<enabled>0</enabled>
</xmlserver>
<radegastserver>
<enabled>0</enabled>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>-1</ecm>
</cache>
<debug>
<darint39>sintoi51</darint39>
<level>internal</level>
<type>all</type>
<output>console, tcp</output>
<logfile>/tmp/newcs.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>172.16.1.1</udp_host>
<udp_port>9000</udp_port>
<udp_options></udp_options>
<tcp_port>1001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>local</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>127.0.0.1</hostname>
<port>12000</port>
</user>
</newcamd_server>
</newCSconfig>

si in newcamd.list din folderul cu mgcamd :

CWS = 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan local
CWS_INCOMING_PORT = 12000

La mine face AU combinatia de mai sus daca sunt selectate numai newcs si mgcamd .

ripper

06-09-09, 23:21

E nevoie de boxkey si rsa in newcs.xml la cardul de TVR ?

Eu nu am nimic pus acolo si merge bine in combinatia newcs+mgcamd pe azbox elite.

valerica

07-09-09, 07:10

Nu e nevoie , am modificat numai frecv. in newcs.xml , <boxkey> si celelalte linii au ramas neschimbate din fisierul original venit in arhiva .

licapavel

07-09-09, 20:11

Am schimbat versiunea noua de s/w si am instalat una mai vechea, chiar cea indicata ca exemplu(2371). Am reusit sa pornesc si TVR cu newcs+mgcamd. Am instalat CCcam 2.1.1 pt azbox. Partea buna e ca sharingul e constant, nu mai dispar cardurile cu sutele dupa refreash la browser. Partea proasta e ca nu primesc carduri de la toate serverele.Imi vin carduri doar de la 2 servere care folosesc versiunile 2.1.1 si 2.0.11 AM incercat sa tot dau restart sa scot liniile F;,..degeaba. Orice as face tot alea 2 servere sunt singurile on si vad carduri. Le-am pus # in fata si sa le las pe cele cu problema...nici asa nu am reusit sa le pornesc. Clientul de no-ip isi face treaba. POrtul 12000 e deschis din router spre azbox. Totul e verificat si totusi nu merge. e problema in a se conecta la alte versiuni de CCcam decat 2.1.1?? Ce sa mai fac?

licapavel

07-09-09, 21:46

Imi cer scuze ca lungesc pagina doar cu posturile mele. M-am mai jucat prin cccam.cfg si am mai bagat cate un # la liniile care nu mi se pareau importante...nu cred ca asta e cauza...dar dupa ce am verificat cccam-ul...erau toate liniile ok...Dcei sa rezolvat si CCcam. Daca privesc in urma, e cam banala treaba. Imi cer scuze inca o data

ripper

08-09-09, 10:23

se poate sa fi avut in cccam.cfg o linie de genul minimum version.

Daca ai avut linia aia ( nu stiu daca e exact asa dar ceva de genul ) activa atunci CCcam-ul tau acccepta doar anumite versiuni de Cccam in conexiune.

istvan

25-09-09, 06:38

New version of MultiCAS, including CCcam client capability!

Edit the CCcam.cfg at wish and enjoy your CCcam connection!

Features:

- CCcam client support
.

le099

26-09-09, 19:43

Cred ca ne ia la misto cu asta, nu merge. Stiu ca era o beta.

istvan

03-10-09, 18:59

We put this in plugins / openxcas
and we ch 755
and what we started and to begin
you become in any Arab porn channel or horbird
and in a sec ok ........

9E
Bet Vision
ZEE TV_NEW
ALPHA PUNJABI_NEW
ZEE CINEMA_NEW
Amarita channel
Kairali channel
Platforma HD paket

Hot Bird 13E
NetMed paket (Nova Hellas)
AlJazeera Sports paket (JSC Sports +1, +2, +3, +4)
ART paket
CANAL + (Poland)
Movies 24 (Poland)
Universal (Poland)
TF1 (France)
TMC (France)
W9 (France)
French Lover
X Dream TV
Dorcel TV
Free-X TV
FREE-XTV 2
Satisfaction TV paket (S1, ... S8 )
Sex on TV paket (Classic, Crystal, Gold, Silver)
Sex View paket

16E
DigitAlb paket (SuperSport 1-5, i još par kanala)

Astra 19.2E
C+ NL paket (RTL4, RTL5, RTL7, NED 1,2,3, NET5, SBS6, VERONICA/JETIX)

BADR 26E
OrbitShowtime paket (npr. Super movies, NBA TV, Orbit News 1, FOX Sports, Cinema City, Super Comedy +2, America Plus +2, MGM, FOX News, Discovery T&L, itd.)

istvan

03-10-09, 19:08

Dupa baieti de pe forumu unguresc zic ca chiar functioneaza...face si Au la D*g* si Globo Tv

le099

06-10-09, 13:14

Regula 12.

A incercat cineva sa-l foloseasca ca server + client? Cu 3105 si cccam client pe s*y it freeze la 3/4 sec.

istvan

07-10-09, 08:13

http://www.islaremota.com/forum/showthread.php?p=74550#post74550

le099

11-10-09, 11:04

MultiCAS 1.60C-3

http://www.megaupload.com/?d=9GSYRXM4

istvan

20-10-09, 18:27

NEW MultiCAS_v160D-B02_2k91020

Cards viacces ok
stabylity satelittes-cable
fixed bugs cccam

http://href.hu/x/adiu

istvan

21-10-09, 08:00

MultiCAS v160D-C02 2k91020

fixed card viaccess problem
fixed bug cccam

(no sky ita fix)

ripper

21-10-09, 10:08

A testat careva Multicas-ul ? Se misca mai bine decat Cccam 2.1.1 nativ ?

istvan

22-10-09, 07:49

A aparut multicas info, mai multe informatii gasiti aici: http://www.satdudez.org/forum/showthread.php?t=118868

valerica

22-10-09, 08:00

A testat careva Multicas-ul ? Se misca mai bine decat Cccam 2.1.1 nativ ?
Da , se misca mai bine ca si client cccamd . Server cccamd nu merge .

qwess

28-10-09, 20:12

Changes:

- Add: ccc_card_list.info for card list of connected server
- Fix: missing get provider for Viaccess
- Fix: missing got ECM pid for DRECrypt

Download:
http://www.fileshare.ro/1783149621.12

qwess

28-10-09, 20:33

v.1.4

Fix:
- Uphops set in C: line
Add:
- Display Card List Info

Download:
http://www.fileshare.ro/1783221284.05

qwess

02-11-09, 09:45

MultiCAS_v160D-D08
11.01.2009
tel.brasil fix au ok

http://www.fileshare.ro/1810924525.62

qwess

08-11-09, 15:42

MultiCAS_v160E - 08.11.2009
-Telefonica FIX

Download:

http://www.fileshare.ro/1851878511.12

istvan

19-11-09, 20:32

MultiCAS
Version 1.61C-A02 Release date: 19/11/2009

- Fix : Problem about Server 2.1.2 and 2.1.3
- Fix Sky ITA

Download:

Code:
http://rapidshare.com/files/309188678/MultiCAS_v161C-A02_2k91119.tgz

le099

20-11-09, 00:59

S*y nu merge nici in local nici in s***e. Este fix o L**A.

valerica

20-11-09, 14:54

Sky it fix in urmatoarea versiune . Oscam card reader (ca newcs) + 1 emu care suporta nline (mgcamd sau cccamd) .

istvan

21-11-09, 07:22

compiled to azbox hd, no OpenXCAS, no internal card reader support
- put into /EMU/OpenXCAS/oscam folder
- latest 523 trunk version

istvan

22-11-09, 08:27

Oscam-AZHD--Rev529

istvan

24-11-09, 07:29

Finaly, Sky IT is working with the latest Multicas and its CS

http://www.sat-universe.com/showthread.php?p=495577

istvan

08-12-09, 07:14

MultiCAS
Version 1.61C-A07 Release date: 07/12/2009
- Fix : Fixed about GiGiTV AU

wilee

08-12-09, 21:18

Salut, Istvan spune-mi te rog unde sau cum pun cccam pe azbox ca dupa indrumarea ta nu am reusit sa inteleg nimic . Ma conectez prin ftp , si pe urma intru in EMU -dar eu nu am acest emu in azbox . Asadar unde il pun , in ce folder ?? Multumim anticipat .

istvan

09-12-09, 06:41

@wilee ai PM.

istvan

22-12-09, 08:05

MultiCAS
Version 1.61C-A09 Release date: 14/12/2009

- Add : Add Support new_biss.key file.
-> When Start MultiCAS, MultiCAS will be try to reading this file..
-> Everything can be control by user...

melcug

04-01-10, 21:12

Pana acum, cu emulatorul din mgcamd nu am putut vedea decat gigi tv, iar pentru multe altele, ca si in exemplul de mai jos (dintr-un pachet cu cheie noua), nu gaseste v i a ... , r s a sau c r i ... key.

MMP[mgcamd]$ ./mgcamd &
1409
MMP[mgcamd]$ tuxbox mgcamd v1.34c by mixvt (compiled Oct 27 2009 21:48:28)
[mg] Net:1:7:2:5s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:no:80:0 Cache:6 Log:3:127.0.0.1:34000 Reread:4
[mg] Ecm cache time: 15
Box type: azbox
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or directory
newcamd keep alive: 300, incoming port: 12000
[OPENXCAS_API:Mon Jan 4 19:05:43.904] openxcas_open:285 ## mgcamd
[OPENXCAS_API:Mon Jan 4 19:05:43.923] load_xcas_control:98 ## loaded controller ID = 0x19760507
osdep_msq_server_open : key_request 0x54C4D100 key_response 0x54C4D101
key(54c4d100), msgflg(448)
key(54c4d101), msgflg(448)
osdep_msq_client_connect : key_request 0x54C4D100 key_response 0x54C4D101
[mgcam] emm thread started
ParseCADescriptor: 01 00 F7 92 00 84 FF 00 20 81 20 25 10 00 4C 28 24 F7 93 00 86 FF 00 00 00 00 00 08 00 00 28 24 F7 C5 A8 21 FF FF FF FF FF FF FF FF FF 28 24 F8 6C 33 11 FF FF FF FF FF FF FF FF FF 28 24 F8 9E 33 17 FF FF FF FF FF FF FF FF FF 28 24 F9 29 00 6D FF FF E0 00 00 00 00 00 00 28 24
ParseCADescriptor: 0D 00 F7 8F
ParseCADescriptor: 05 00 F8 0A 10 01 00 13 01 20 14 03 02 26 10
ParseCADescriptor: 05 00 F8 B2 10 01 00 13 01 20 14 03 03 28 20
ParseCADescriptor: 05 00 F9 33 10 01 00 13 01 20 14 03 03 29 20
ParseCADescriptor: 05 00 F9 48 10 01 00 13 01 20 14 03 03 29 40
ParseCADescriptor: 01 00 F7 92 00 84 FF 00 20 81 20 25 10 00 4C 28 24 F7 93 00 86 FF 00 00 00 00 00 08 00 00 28 24 F7 C5 A8 21 FF FF FF FF FF FF FF FF FF 28 24 F8 6C 33 11 FF FF FF FF FF FF FF FF FF 28 24 F8 9E 33 17 FF FF FF FF FF FF FF FF FF 28 24 F9 29 00 6D FF FF E0 00 00 00 00 00 00 28 24
ParseCADescriptor: 0D 00 F7 8F
ParseCADescriptor: 05 00 F8 0A 10 01 00 13 01 20 14 03 02 26 10
ParseCADescriptor: 05 00 F8 B2 10 01 00 13 01 20 14 03 03 28 20
ParseCADescriptor: 05 00 F9 33 10 01 00 13 01 20 14 03 03 29 20
ParseCADescriptor: 05 00 F9 48 10 01 00 13 01 20 14 03 03 29 40
[mg0] service 6FF7 index 0 pmt pid 0 (1)
EMM: CaID: 0x0D00 -> CaPID: 0x0190 ProvID: 000000
EMM: CaID: 0x0B00 -> CaPID: 0x0192 ProvID: 000000
EMM: CaID: 0x0100 -> CaPID: 0x00C1 ProvID: 000000
EMM: CaID: 0x0100 -> CaPID: 0x00C8 ProvID: 000086
EMM: CaID: 0x0100 -> CaPID: 0x00B7 ProvID: 00006A
EMM: CaID: 0x0100 -> CaPID: 0x02C6 ProvID: 003341
EMM: CaID: 0x0100 -> CaPID: 0x02BF ProvID: 003317
EMM: CaID: 0x0100 -> CaPID: 0x00C4 ProvID: 004106
*EMM: CaID: 0x1815 -> CaPID: 0x0193 ProvID: 000000
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x180A ProvID: 022610
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x18B2 ProvID: 032820
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1933 ProvID: 032920
[mg0] ECM: CaID: 0x0500 -> CaPID: 0x1948 ProvID: 032940
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1792 ProvID: 000084
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1793 ProvID: 000086
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x17C5 ProvID: 00A821
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x186C ProvID: 003311
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x189E ProvID: 003317
[mg0] ECM: CaID: 0x0100 -> CaPID: 0x1929 ProvID: 00006D
[mg0] ECM: CaID: 0x0D00 -> CaPID: 0x178F ProvID: 000000
[mg0] No viaccess key(s) found for id 22610 keynr 08
[mg0] network can't decode
[mg0] pid 0x180A failed to decode.
[mg0] No viaccess key(s) found for id 32820 keynr 08
[mg0] network can't decode
[mg0] pid 0x18B2 failed to decode.
[mg0] No viaccess key(s) found for id 32920 keynr 08
[mg0] network can't decode
[mg0] pid 0x1933 failed to decode.
[mg0] No viaccess key(s) found for id 32940 keynr 08
[mg0] network can't decode
[mg0] pid 0x1948 failed to decode.
[mg0] RSA keys not found for id 84
[mg0] network can't decode
[mg0] pid 0x1792 failed to decode.
[mg0] No seca key(s) found for id A821 keynr 0e
[mg0] network can't decode
[mg0] pid 0x17C5 failed to decode.
[mg0] No seca key(s) found for id 3311 keynr 0e
[mg0] network can't decode
[mg0] pid 0x186C failed to decode.
[mg0] No seca key(s) found for id 3317 keynr 0e
[mg0] network can't decode
[mg0] pid 0x189E failed to decode.
[mg0] No seca key(s) found for id 6D keynr 0e
[mg0] network can't decode
[mg0] pid 0x1929 failed to decode.
no cryptoworks RSA found
no cryptoworks RSA found
[mgcamd] Cryptoworks key(s) not found for caid 0D00 provid 10 keynr 00
[mg0] network can't decode
[mg0] pid 0x178F failed to decode.
[mg0] RSA keys not found for id 84
[mgcamd] signal 2 received
stopping mg0
[mg0] stoping camd..

[mg0] stopped
closing routes
unlinking files

Pot face ceva pentru pachetele codate, altfel decat N, desi sunt cunoscute cheile?

Multumesc anticipat.

qwess

19-01-10, 21:29

MultiCAS_v162_18012010
ADD : Add Support TIGER/NCMED Card (for Spain and Italy TDT)
Fix : More improve about Re-Connect for CCcam Server

Download
(http://www.fileshare.ro/2631577132.88)

istvan

21-01-10, 08:11

mgcamd_1.35_for_Azbox_HD
http://www.speedyshare.com/files/20464218/mgcamd_1.35_for_Azbox_HD.rar

istvan

28-01-10, 07:20

Fix some EMM issues

valerica

02-02-10, 12:31

ADD : Add Support ignore.list for CCcam (see example-ignore.list)
FIX : Fix abour TNTSat parckage for CCcam and Newcamd

istvan

07-02-10, 17:54

New sat and cable receivers hd

istvan

09-02-10, 15:04

MultiCAS_v162B-A02
ADD : Add support priority control for provider of SECA and Viaccess by priocaid.cfg
(See the example-priocaid.cfg)

http://www.megaupload.com/?d=RBBVM9MH

qwess

11-02-10, 13:22

MultiCAS v1.62B-A03

Latest Version of Multicas
MultiCAS
-DATE : 2010/02/11
-Version : v1.62B-A03
-----------------------------------------------
MOD : More improve about priocaid.cfg (priority for CAID and Provider ID)
- e.g. priority of CAID : 0963 > 0961 > 0960

Note> About New Viaccess 2.6 by Internal EMU

if want to ignore a key for Internal EMU of via2.6, checking as below

-E.G : How to Disable for SCT / MCT it..
1. Open 'new_via.key' file
2. Looking 'SCT/MCT 023B00 08 XX XX ...'
3. Change a Index the 08 to 00 (SCT/MCT 023B00 08 XX XX ... -> SCT/MCT 023B00 00 XX XX ...)
4. Close with Save 'new_via.key' file
5. Restart MultiCAS...

DOWNLOAD AND INSTALL DIRECTLY INTO AZ HD FROM THE SUPPORT SERVER...

fabi

15-02-10, 11:34

Folosesc multicast pentru linia C, sebloceaza nu totdeauna dela cine vine linia spune ca linia este ok, si internetul este ok poate nu folosesc emu corespunzator pentru lini C varog sa trimita cineva o configuratie in PM care merge stabil Multumesc frumos.

istvan

19-02-10, 07:49

MultiCAS
-DATE : 2010/02/18
-Version : v1.62B-A07
-----------------------------------------------
FIX : Fixed for S*y IT (Internal Card reader)
ETC : Several Bug Fix..

resofty

20-02-10, 15:54

CCcam 2.1.2 cccam 2.1.3 cccam 2.1.4 pe azbox
http://sateliti.info/showthread.php?p=117545#post117545

valerica

20-02-10, 18:07

Din pacate nu functioneaza ; libc.so.6 da eroare : cannot handle TLS data .
Trebuie refacut si scriptul dvbapi_module care gestioneaza cccam.mipsel .

romix

21-02-10, 15:38

Download PLUGINS.rar

Extract PLUGINS.rar and you will have 3 folders

Folders CCcamFakeRoot ,OpenXCAS and realcccaminfo

Put folders in Azbox PLUGINS folder..

Open PLUGINS/OpenXCAS/libdvbapiCAS all file 755 mode
Open PLUGINS/realcccaminfo all file 755 mode

Edit module.seq edit and add libdvbapiCAS

/PLUGINS/CCcamFakeRoot/etc/ folder put CCcam.cfg

Restart Azbox and select libdvbapiCAS from plugins menu

Thanks to kanber_kav

http://www.megaupload.com/?d=U4C246RG

le099

22-02-10, 23:35

Pare destul de stabil, dar.... lipsesc functiile streaming si rec. Nu merg.
Probe facute cu FW 4295 si KGD 4348
FW + Multicas 162b + 3c 0.2+ 3c 2.1.4
1. Multicas vede si stream si rec (freeze in HD)
2. 3c 0.2 (mai stabil) vede si stream si rec
3. 3c 2.1.4 destul de stabil dar fara suport stream si rec.

istvan

25-02-10, 07:22

Quote:
-DATE : 2010/02/24
-Version : v1.62C
-----------------------------------------------
MOD : More improve about CCcam client mode for CCcam 2.1.4
ADD : Add support DT08 for Nagra (HD+ will be work)
ADD : Add support about working together CCcam and Newcamd
-- check the splitterdata.txt 'CCCAM_NEWCAMD_WORK_TOGETHER = 0' -

istvan

01-03-10, 08:00

MultiCAS v162C-A01 2k100228
http://www.mediafire.com/file/zkw3zhymtqm/MultiCAS_v162C-A01_2k100228.tgz

istvan

05-03-10, 23:15

new multicas v1.62C-A03A

-fixed bug in careader
-fixed bug newcamd and cccam ok...

istvan

06-03-10, 19:30

MultiCAS_v162C-A03b NET BR
NOVEDAD HD RECEIVERS SAT E CABLE 06-03-2010...:)

istvan

09-03-10, 08:35

MultiCAS-v162C-A04

istvan

11-03-10, 10:45

MultiCAS-v162D-A01

at moment no changelog

Se poate descarca din meniu...

istvan

22-03-10, 17:02

22-03-2010
FIX : Fixed s#y Italia

istvan

28-03-10, 19:32

MultiCAS-v162D-A04 SAT E NET OK

qwess

07-04-10, 15:28

-DATE : 2010/04/05
-Version : v1.62D-A05
-----------------------------------------------
FIX : Fixed about CONAX Update

tks @licapavel

Download
(http://www.fileshare.ro/4263559418.88)

istvan

16-04-10, 07:34

Added emu for I2 of NOVA (Need to put a key by manual : 10 06 04 - 06/16 or 08/1

istvan

30-04-10, 07:30

multiCAS-162D-B01

FIX : Fixed some channels with Freeze
MOD : More improve about Re-Connection to CCcam's Server
MOD : Message disabled in connection with "Connect to Server"

istvan

04-05-10, 19:23

MOD : improve about Betacrypt
MOD : Message Enable again in connection with "Connect to Server"

qwess

06-05-10, 09:06

MultiCAS1.62D-B03
disponibil in meniu OpenXCAS, sau prin MAZ 3.0

-info server

studeer

06-05-10, 12:54

bravo bre. te miști repede, nu ca mine.

qwess

08-05-10, 08:10

MultiCAS
-DATE : 2010/05/07
-Version : v1.62D-B04
-----------------------------------------------
FIX : Fixed about CPU usage

DOWNLOAD (http://www.fileshare.ro/4906471518.05)

qwess

09-05-10, 10:56

MultiCAS
-DATE : 2010/05/09
-Version : v1.62D-B05
____________________
disponibil in meniu OpenXCAS, sau prin MAZ 3.0
DOWNLOAD (http://www.fileshare.ro/4935568916.48)

qwess

10-05-10, 22:19

Cum configurez ignore.list(multicas) pentru un provider(gigica) sa nu il ia din C: ci doar din K.
nu am lucrat cu acest ignore nici pe cccam nici pe multicas, si vreau sa scap de acest conflict.
Merçi.

valerica

11-05-10, 07:43

ProvId din K e diferit de cel care deschide cu linia C ?

qwess

11-05-10, 09:02

acelasi ProvID , ma intreb daca acest ignore e general sau se (poate)aplica doar unui protocol(C sau K), solutia care o am momentan e sa_l elimin din F catre multicas am instalat cccam +> multicas.
in ignore am vazut ceva de genu:#nume, X:{}, V:{},S:{}, pentru 180X ii pun N:{Prov}?

qwess

11-05-10, 11:34

cu ignore.list din multicas nu am reusit mai nimic, am pus X: { 20 11 }, negasind alta solutie, in C:-ul din multicas pare sa nu functioneze filtrarea prin HOP, CaID, ProvID, si am bagat in F-urile din CCcam pentru MultiCAS de forma:
1.F: user pass 2 0 0 { 1801:002111, 1802:002011, 1802:002111, 0500:0FFF720, 0500:0025900, 0500:0025910 }
pentru a lua doar doar din local:
2.F: user pass 0 1 1 { 0:0:1 }
vad ca functioneaza..., prima linie e configurata bine?
totusi am o problema cu restartul MultiCAS din tasta ">>|", nu se conecteaza la cccam intern, decat prin terminal, sau din Menu/Plugins... !!! 755 au toate.

valerica

11-05-10, 11:41

Daca il pui in ignore , atunci nu mai merge nici pe K nici pe C . Cu az (unde optiunile la cline nu au efect) , singura posib. e sa pui restrictie la fline .
In ignore (cand o sa-l folosesti , nu acum pt. gigel) toate optiunile in afara de viax si secax se scriu cu x in fata , nu cu n sau nd , etc .

---------- Post added at 11:41 ---------- Previous post was at 11:35 ----------

cu ignore.list din multicas nu am reusit mai nimic, am pus X: { 20 11 }, negasind alta solutie, in C:-ul din multicas pare sa nu functioneze filtrarea prin HOP, CaID, ProvID, si am bagat in F-urile din CCcam pentru MultiCAS de forma:
1.F: user pass 2 0 0 { 1801:002111, 1802:002011, 1802:002111, 0500:0FFF720, 0500:0025900, 0500:0025910 }
pentru a lua doar doar din local:
2.F: user pass 0 1 1 { 0:0:1 }
vad ca functioneaza..., prima linie e configurata bine?
totusi am o problema cu restartul MultiCAS din tasta ">>|", nu se conecteaza la cccam intern, decat prin terminal, sau din Menu/Plugins... !!! 755 au toate.
La mine a mers filtrarea in ignore pt. ndx : am filtrat 0919 si acum iau numai 093b . Pentru 2 cand ajung acasa sa vad , poate-ti rasp. cineva pana atunci .

valerica

11-05-10, 18:22

Pentru 2 semnificatia configuratiei tale , in ordine :
- 0 - 0 hop-uri permise de unde poate primi clientul fline ;
- 1 - clientul primeste chei de la server ;
- 1 - clientul primeste emm (cu 0 nu primeste) ;
- {0:0:1} - clientul nu are drept de reshare .
Nici la mine nu se con. daca folosesc restart cu tasta amintita ... vre-un bug la ultimile daily fw .

qwess

11-05-10, 19:01

F2 e facuta special pentru local si pentru multicas, de asta am scos reshare-ul, la F1 nu eram sigur de filtrele introduse, dar vad ca merge foarte bine.
Referitor la problema de reconectarea din tasta respectiva, pentru liniile venite de la ccc-ul intern, am dezactivat inadyn si vad ca acum merge la a 3, 4-a incercare( am restartat de cateva ori ptr teste).Nu stiu cu ce incomoda DynDNS-ul liniile cu host intern(127.0.0.1 sau 192.168.X.X).
Problema rezolvata.
Multumesc!!

istvan

12-05-10, 18:33

MultiCAS-v162D-B07

No changelog

istvan

18-05-10, 19:06

no change log yet

MultiCAS-v162D-B08A

http://rapidshare.com/files/38880789...v162D-B08A.rar

istvan

19-05-10, 07:53

MGcamd 135a azbox

18-05-2010

Bullsat Irdeto2

valerica

21-05-10, 09:21

MultiCAS-v1.62D-B09
Fix : TNTSAT
Thanx to spanish forum .

http://www.megaupload.com/?d=JDZ5P0PF

qwess

10-06-10, 22:58

MultiCAS v162E
MultiCAS
-DATE : 2010/06/10
-Version : v1.62E
-----------------------------------------------
FIX : ZIGGO NL first time activation fix

DOWNLOAD (http://www.fileshare.ro/6215656708.82)

istvan

24-06-10, 07:24

MultiCAS
-DATE : 2010/06/24
-Version : v1.62E-A02
-----------------------------------------------
FIX : Fixed BIS (included valid new_via.key)

ripper

04-07-10, 12:14

De doua zile nu imi mai deschide Multicas-ul toate canalele de la Digi.
Daca ma uit pe server nu vad nici o cerere de key catre server.

Ex. Realitatea TV merge si Protv-ul nu.

Stie cineva despre ce e vorba. Pe server am si carduri cu CAID 1801, 1802 si 1880.

valerica

04-07-10, 12:29

In priocaid.cfg pune 1802 . La mine Realitatea pe skincam.info :

---------------------------------------
Info CamSkin KGD version 0.1
---------------------------------------
Cards: 539
Caid: 0x1802
Sys: 0x1802
Hop: 0
Peer: xxxx.dyndns.tv
Ecm: 0.400
Dist1: 148 - Dist2: 373 - Dist3: 0
Level0: 488 - Level1: 42 - Level2: 3 - Level3: 0

ripper

04-07-10, 14:32

asa aveam in priocaid.cfg.

Realitatea merge si la mine.
Problema o am cu ProTV si TVR 1 si inca cateva.

---------- Post added at 14:32 ---------- Previous post was at 13:12 ----------

ce este si mai curios daca pun pe Antena1 si dau info imi apre ca systemul este NDS si CAID 93B. Daca pun pe Antena 3 apare system 1802 si canalul se deschide.

La fel apare la toate canalele care nu se deschid.
Oare de ce nu recunoaste CAID-ul bun ?

valerica

04-07-10, 17:08

Problema e ca pe canalele respective sunt prezente mai multe caids si multicasul incearca sa desch. cu chei pe 1801 (acest caid mai este prezent doar pe cateva canale) + face fake AU (cheile sunt false) ; intra in menu si pune la nag. totul pe off : auto roll , emu s , etc si va merge numai pe 1802 si 1880 .

ripper

04-07-10, 23:54

merci mult.

Ma gandeam ca asta ar putea fi dar nu stiam cum sa dezactivez emulatorul.
Am incercat in prima faza sa sterg keyle din meniu dar nu am rezolvat asa.

Dupa ce am pus totul pe OFF la Nagra1 totul e ok.
Merci inca o data pentru ajutor.

karbit

07-07-10, 10:42

http://www.megaupload.com/?d=PVPX1I8K

fixed au for di*i

manivuta

07-07-10, 11:03

Cine locuieste in apropiere de cartierul Berceni :Bucuresti: sa ma ajute sa configurez Azbox-ul ca sint incepator si imi este foarte greu .Eventual contra cost.Multumesc anticipat.

qwess

14-07-10, 22:36

MultiCAS-v162E-A07
Multicas for sat and cable Amazonas

DOWNLOAD (http://www.fileshare.ro/7918695950.44)

istvan

03-08-10, 07:48

- DATE : 2010/08/02
- Version : v1.62E-A08
-----------------------------------------------
Code:
MOD : More improve about CCcam v2.1.3 and v2.1.4
ADD : Update new_via.key for latest BIS

istvan

05-08-10, 07:24

MultiCAS_v162E-A09

fixed tlf
chanel D xd
NEWS BISS (TV_MORENA(GLB HD) AND S*T HD)
Possibile S3x Pr1v4t3 Include

crisz

10-08-10, 20:22

Multicas 162E-A11

Bu*** 39* E , OK !
:clap:

qwess

01-09-10, 20:12

>>OSCAM 0.99.4svn build #2974<<

cu ultima revizie 2975 nu m-am impacat de nici un fel cu dvbapi=yes, blocheaza receiverul.

suport smartreader=yes
internal card=yes(probleme initializare la unele carduri)
webif=yes
cccam server/client=yes (fixed client signal 11 on NOK)
loadbalance=yes
dvbapi=yes
il putem folosi singur fara alta combinatie EMU.chiar imi place cum se misca- insa, o problema--inregistrarea!!!

testat
in reader: smartreader, cccam si newcamd=OK
in client: cccam, newcamd si dvbapi =OK
cateva sett ajutatoare:

oscam.conf:
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
usrfile = /tmp/oscamuser.log
logfile = stdout
cwlogdir = /tmp/cw
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 1
resolvedelay = 30
unlockparental = 1
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 1
readerautoloadbalance_save = 1

[monitor]
port = 988
nocrypt = 127.0.0.1,192.168.2.XX
aulow = 120
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[newcamd]
port = 34000@0000:000000;34001@0000:000000(exemple)
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[cccam]
port = 12001
reshare = 2
version = 2.1.3

[dvbapi]
enabled = 1
au = 1
boxtype = azbox
user = dvbapi
pmt_mode = 1
priority = 092F,093B,1880,0B00,0500,09C4(exemple- in functie de ce aveti)
ignore = 09C7,1834,1833,1802(exemple)

[webif]
httpport = 808
httpuser = root
httppwd = oscam
httprefresh = 5
httpallowed = 127.0.0.1,192.168.2.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0

oscam.user(exemplu)

[account]
user = topex
pwd = topex
disabled = 0
expdate =
group = 1
hostname = 192.168.2.5
uniq = 0
sleep = 0
monlevel = 4
au = smargo1
services = tvr 16e
caid = 0500
betatunnel =
ident = 0500:FFF720,025900,025910
cccmaxhops = 3
cccreshare = 3
keepalive = 1
numusers = 0
penalty = 0

oscam.server(exemplu)

[reader]
label = smargo1
enable = 1
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
services =
smargopatch =
caid = 0500
detect = cd
mhz = 358
cardmhz = 358
ident = 0000:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100
deprecated = 1
auprovid = 025900

[reader]
label = cccam-server
enable = 1
protocol = cccam
device = hostname,port
account = user,pass
services =
inactivitytimeout = 1
caid = 0000
ident = 0000:00FFFF
group = 1
emmcache = 1,3,2
ecmcache = 1
lb_weight = 100
cccversion = 2.1.1
cccmaxhops = 3
cccdisableautoblock = 1
cccwantemu = 1

oscam.provid(exemplu)

0500:025900|TVR-HD|Eutelsat 16E|Romanian
0500:025910|TVR-HD|Eutelsat 16E|Romanian
0500:FFF720|TVR-HD|Eutelsat 16E|Romanian
0500:00FFFF|TVR-HD|Eutelsat 16E|Romanian
092F:000000|Dolce|39E|Roamnian
093B:000000|SKYIT|13E|Italian
0919:000000|SKYIT|13E|Italian
1802:000000|DigiTV|1W-0,8W|Romanian
1802:002111|DigiTV|1W-0,8W|Romanian
1802:002011|DigiTV|1W-0,8W|Romanian
1880:000000|DigiTV|1W-0,8W|Romanian
1880:002111|DigiTV|1W-0,8W|Romanian
1880:002011|DigiTV|1W-0,8W|Romanian
1880:002113|DigiTV|1W-0,8W|Romanian
0B00:000000|MTV Networks|13E/19E|
0B02:000000|Focussat||Romanian
0B02:024F00|AKTA||Romanian
1702:000000|SKY DE|19,2E|Germanian
1833:000000|SKY DE|19,2E|Germanian
1834:000000|SKY DE|19,2E|Germanian
09C4:000000|SKY DE|19,2E|Germanian
09C7:000000|SKY DE|19,2E|Germanian
0100:000068|Cyfra+|13E|
0100:00006A| Canal+NL[Full+Spice+Dorcel Tv]|19E|
0100:00006B|Canal+NL[Full+Spice+Dorcel Tv]|19E|
0100:00006C|TV Vlaanderen|19E|
0100:00006D|Canal+NL[Full+Spice+Dorcel Tv]|19E|

oscam.services

[tvr 16e]
caid = 0500
provid = FFF720,025900,025910
srvid = 0001,0002,000F

[dolce]
caid = 092F
provid = 000000
srvid = 008A,008B,008C,008D,0090,0091,0092,0093,0094,0095,009B,009C,009D,00A1,00A2,00A4,00A5,00A6,00A7,00AA, 00B0,00BA,00BB,00BC,00BD,00BE,00C2,00D5,00D6,00D7,00D8,00D9,00DA,00DB,00DC,00DD,00DE,00DF,00E0,00E1, 00E2,00EA,00E7,00E8,00F0,00F1,00F3,00F5,00FB,0109,010A,010B,010E,0114,0115,0116,0117,0118,010F

[SKY IT]
caid = 093B,0919
provid = 000000
srvid = 106A,106C,106E,2B5D,2DCA,2CBC,2DCC,106E,2B6B,2CBB,2B61,2B5F,058E,2D52,1FC9,2505,379D,379E,2DC6,2B70, 1FBA,0E33,1FC8,1FC5,38C1,1FCB,0E04,059E,1128,05A3,2501,2C36,05CA,0DCA,2B67,24CF,3C0B,2B66,0DCF,3900, 3BC9,2C37,059F,1FBC,379C,1069,0E39,1FBD,1FBE,1FB9,1109,2AB3,3BE3,2D02,05BB,05B9,2CFF,24FC,0DC7,1FBB, 05A0,0E2E,0E31,0E2F,110B,2B6E,2509,3BCB,2CBD,2CBE,2AB4,2C9C,2B7C,3BC5,3BCC,2504,2CF9,2507,2CC4,3C04, 2C38,2C31,0590,0DC1,2C2E,24E7,2D17,2D13,2D16,2D03,2D08,38D0,2C28,38F3,3C1C,3BCD,3BE5,3C0D,2C33,38E3, 1109,2CFE,059D,110A,10E8,10EC,10E9,10E5,10E7,10E1,3BD0,24E4,0599,24E5,24E6,0CE5,2013,0CE6,0D50,2C3A, 2CBF,2CC0,2506,0E03,0DC0,3452,2CC8,2B0F,2B10,2B11,2AA8,2AA9,2DD9,2DCD,2AB1,2ABA,2B0E,37A1,379F,2B13, 0F72,0F73,0FF3,0FFB,2B12,1087,2AAA,2AAF,2C2F,2DC7,2BCF,2BD1,2BD3,2BD5,2BD7,2BD9,2D56,2D5D,2D5F,2D61, 2D62,2D63

[SKY DE]
caid = 1702,1833,1834,09C4,09C7
provid = 000000
srvid = 0008,0009,000A,000B,000C,0014,0015,0016,0017,0018,0019,001A,001B,001C,001D,0022,0024,0029,002A,002B, 0032,0034,0035,003C,003D,003E,003F,0040,0042,0043,0044,0045,0046,007E,007F,0080,0081,0082,0083,0084, 0096,0097,0098,0099,009A,009B,009C,00A8,00DD,00DE,00DF,00FB,00FC,00FD,0106,0107,0108,010F,0110,0119, 011A,011B,0123,0124,0125,012D,012E,012F,0137,0138,0139,0141,0142,0143,014B,014C,014D,0156,0159,0160, 0163,016B,016D,0175,0201,0203,0204,0206,0298,0305,3331,3393,3395,3397,3398,4461,4462,7009,700A

[DIGI]
caid = 1802,1880
provid = 00FFFF
srvid = 0409,03E9,03ED,0CC6,0C9E,03EB,04A1,055A,0FFA,03EF,041A,03EE,03F1,0400,0D98,1802,03FF,0FE6,0FDC,0FD2, 062C,0DDE,0492,1018,03F4,049C,0D7A,0D70,03F8,0B22,0D20,03F7,0DD4,03F5,03F2,054E,054A,040A,0402,0404, 0405,0406,1004,0407,0DE8,0DA2,0403,0408,0A5A,060E,0B86,0D8E,0C30,04B0,0C44,0424,055C,0D52,0D5C,03F0, 1022,0B90,055F,0E06,0D84,03FD,03FC,03FB,0B18,0DB6,03F9,0550,03FA,056E,03FE,0D3E,1770,177A,0E4C,0FC8, 09E2,09CE,0618,0A8C,0564,0A50,0604,0622,04A6,05E8,0C80,0D2A,1018,0FA1,0D66,0FAA,0D34

[MTV]
caid = 0B00
provid = 00FFFF
srvid = 0001,0002,0004,0007,000A,000B,6FEE,6FEF,6FF0,6FF1,6FF3,6FFA,6FFF

[FOCUS]
caid = 0B02
provid = 00FFFF
srvid = 03EC,0034,0035,0036,0037,0038,0039,003A,003B,003C,003D,003E,003F,0040,0041,0042,0044,0045,0002,0003, 0004,0005,0006,0007,0008,0009,000A,000B,000C,000D,000E,000F,0015,0016,0017,0018,0019,001A,001B,001C, 001D,001E,001F,0020,0020,0021,0022,0023,0010,0043,03EB,0024

[AKTA]
caid = 0B00
provid = 024F00
srvid = 0001,0002,0004,0005,0006,0008,0009,000A,000B,000C,000D,000E,000F,0020,3a37,0021,0037,0038,0039,003A, 003B,003C,003D,003E,0041,0043,0044,0045,0046,0010,0011,0012,0013,0015,0016,0017,0018,0019,001A,001B, 001C,001D,001E,001F

http://img185.imageshack.us/img185/5700/oscam.png

oscam-svn2974-webif-azbox (http://www.fileshare.ro/9866050920.5)

---------- Post added at 20:12 ---------- Previous post was at 19:25 ----------

oscam.srvid

TVR16E,MTV,SKY IT,SKY DE,AKTA,DOLCE,FOCUSSAT,DIGITV,Kabel Deutschland,ORF,ASTRA HD+,UMDOWNLOAD (http://www.fileshare.ro/9867694499.65)

qwess

05-09-10, 12:24

MultiCASMultiCAS-v162E-A12(Diavolo) full update 02092k10

changelog:
Bulsatcom on Hellas Sat 2 at 39.0°E
Rai on Hotbird 13°E ok

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png (http://www.megaupload.com/?d=RXBW0X7V)
MultiCAS v162E-B01 04092k10
no changelog.

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png (http://www.megaupload.com/?d=Q2Q0CNWW)

---------- Post added at 12:24 ---------- Previous post was at 11:50 ----------

oscam-svn-full-Distribution
available versions:
- oscam-svnX-arm-coolstream CoolstreamHD1
- oscam-svnX-arm-nslu2-openwrt OpenWRT Linksys NSLU2
- oscam-svnX-arm-nslu2-unslung Unslung Linksys NSLU2
- oscam-svnX-dbox2-tuxbox Dbox2
- oscam-svnX-i686-pc-linux 32 Bit Linux PC
- oscam-svnX-x86_64-pc-linux 64 Bit Linux PC
- oscam-svnX-mips-azbox AZBox HD
- oscam-svnX-mips-fonera2 La Fonera Router
- oscam-svnX-mips-freetz Fritzbox Router
- oscam-svnX-mips-tuxbox DM500HD, DM800, DM7025, DM8000
- oscam-svnX-openwrt-little_endian-kernel24 OpenWRT Router with Kernel 2.4.x
- oscam-svnX-openwrt-little_endian-kernel26 OpenWRT Router with Kernel 2.6.x
- oscam-svnX-powerpc-tuxbox-smartreader DM500, DM500+, DM600, DM7000, DM7020 compatible STBs with usb for smartreader
- oscam-svnX-powerpc-tuxbox-without_smartreader DM500, DM500+, DM600, DM7000, DM7020
- oscam-svnX-sh4-amino IPBOX 9000 HD, IPBOX 910 HD, IPBOX 91 HD, Kathrein UFS 910
- oscam-svnX-tripledragon Triple Dragon

webif is on all versions included
dvb-api is on all dvb-api stbs included like dreambox and sh4 stbs with enigma2, also availble on azbox (openxcas)
smartreader support is included in all versions except on 'without_smartreader' versions in filename
azbox version can be installed by copying Camd.tgz to /tmp and installing from the plugins menu

changelog:

------------------------------------------------------------------------
r2982 | schlocke | 2010-09-04 12:53:50 -0700 (Sat, 04 Sep 2010) | 2 lines

cccam: enhanced ecm mode implemented! See forum for more info

------------------------------------------------------------------------
r2981 | alno | 2010-09-04 08:36:27 -0700 (Sat, 04 Sep 2010) | 1 line

removing empty brackets in log
------------------------------------------------------------------------
r2980 | rorothetroll | 2010-09-03 10:33:50 -0700 (Fri, 03 Sep 2010) | 1 line

new patch to save emm even if we block them
------------------------------------------------------------------------
r2979 | rorothetroll | 2010-09-02 18:56:50 -0700 (Thu, 02 Sep 2010) | 1 line

added atr for NDS NZ card. Thank you rebdog
------------------------------------------------------------------------
r2978 | schlocke | 2010-09-01 12:26:59 -0700 (Wed, 01 Sep 2010) | 2 lines

cccam: cleanup + optimizing cccam client+server

------------------------------------------------------------------------
r2977 | schlocke | 2010-09-01 05:23:59 -0700 (Wed, 01 Sep 2010) | 2 lines

oscam-chk: caid-checking fixed

------------------------------------------------------------------------
r2976 | schlocke | 2010-09-01 04:44:18 -0700 (Wed, 01 Sep 2010) | 2 lines

oscam-chk with trace output

------------------------------------------------------------------------
r2975 | schlocke | 2010-08-31 07:58:03 -0700 (Tue, 31 Aug 2010) | 2 lines

loadbalancer: caid-filter checks original caid

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png

inserati URL(copy/paste) in Browser:

http://www.ump2002.net/index.php?action=downloadfile&filename=oscam-svn2458-gbx-5.8-full-Distribution.tar.gz&directory=OSCam&

qwess

06-09-10, 18:40

recomand rev.2991 pare cea mai stabila si rapida(zapping /meniu):clap:
setup-ul meu:

[global]
pidfile = /tmp/oscam.pid
usrfile = /tmp/oscamuser.log
logfile = stdout
cwlogdir = /tmp/cw
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 1
resolvedelay = 30
unlockparental = 1
nice = -5
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 1
readerautoloadbalance_save = 100

[monitor]
port = 988
serverip = 192.168.2.X
nocrypt = 127.0.0.1,192.168.2.1-192.168.2.40
aulow = 120
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[newcamd]
port = 34000@0500:FFF720,025900;34001@092F:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 1

[cccam]
port = 12001
reshare = 2
version = 2.1.3

[dvbapi]
enabled = 1
au = 1
boxtype = none
user = dvbapi
pmt_mode = 1
priority = 093B,1880,09C4,1702
ignore = 09C7,1802

[webif]
httpport = 808
httpuser = root
httppwd = *******
httprefresh = 5
httpallowed = 127.0.0.1,192.168.2.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0

qwess

10-09-10, 22:42

2 versiuni oscam cu Info ECM ( tasta >>)
oscam-0.99.4-SB-svn2894-si 3032
OpenXCAS.conf:

[module]
name = oscamCAS
daemon = oscam_module
#daemon = oscam_module -255
version = 1
INFO = /tmp/ecm.info
REFRESH = 2
Afisarea:

caid: 0x093B
pid: 0x06A7
prov: 0x000000
reader: cccam-topex
from: 192.168.2.5
protocol: cccam
hops: 2
ecm time: 0.759
cw0: 00 00 00 00 00 00 00 00
cw1: 00 00 00 00 00 00 00 00
http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png

oscam-0.99.4-SB-svn2894-azbox-mips.zip (http://www.easysurf.ro/eyf2rlps68o7/oscam-0.99.4-SB-svn2894-azbox-mips.zip.htm) Size: 308,3 Kb
oscam-0.99.4-SB-svn3032-azbox-mips.zip (http://www.easysurf.ro/tykijcc7q846/oscam-0.99.4-SB-svn3032-azbox-mips.zip.htm) Size: 322.1 Kb

:drinks:

qwess

15-09-10, 09:35

oscam3066_dvbapi_webif_ecminfo
(patch)
changelog:
------------------------------------------------------------------------
r3066 | schlocke | 2010-09-14 13:55:50 -0700 (Tue, 14 Sep 2010) | 3 lines
cccam: cc_maxhop fix
removed some unnessasary logmessages
------------------------------------------------------------------------
openxcas.conf:

[module]
name = oscamCAS
daemon = oscam
version = 1
INFO = /tmp/ecm.info
REFRESH = 2

caid: 0x0500
pid: 0x0021
prov: 0x025900
reader: smargo1
from: local
protocol:
hops: 0
ecm time: 0.343
cw0: 8D FC 9A 23 2D 84 F8 A9
cw1: D5 BC 42 D3 4D FD AC F6

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png (http://www.easysurf.ro/zpqywzxkwwkk/oscam3066_dvbapi_webif_ecminfo.rar.htm)

istvan

23-09-10, 10:54

Bulsat 39°E Hellas

qwess

19-10-10, 08:51

MultiCAS-v162E-C02

MultiCAS
-DATE : 2010/10/18
-Version : v1.62E-C02
-----------------------------------------------
MOD : More stablility to better for CCcam server of 2.1.0 / 2.1.1 / 2.1.2

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png (http://www.easysurf.ro/krdwamlewrqt/MultiCAS-v162E-C02.tgz.htm)

qwess

26-10-10, 09:43

MultiCas v1.62E-C03A

MOD : Improve about send ECM for Newcamd
MOD : Already added 'INFO = /tmp/ccc_ecm.info // REFRESH = 2' in openxcas.conf (>> key will be working to direct)

http://img188.imageshack.us/img188/3531/2r4k5c3jpg.png (http://www.easysurf.ro/28jwpuc53hns/MultiCASv162E-C03A.rar.htm)

istvan

10-11-10, 07:07

Added support multi-AES key for TNTSat and CSat via new_via.key (Already included active AES Key)

istvan

25-11-10, 07:08

MultiCAS-v162E-C07

MultiCAS
-DATE : 2010/11/24
-Version : v1.62E-C07
-----------------------------------------------
ADD : added via 3.0 emu (add working 03xxxx in new_via.key)
MOD : Improve for new server of CCcam 2.2.x (Need more test..)

istvan

10-12-10, 07:37

This MC has been more update as below

1. TNTS*t for official CARD

2. TNTS*t for EMU

3. New CCcam 2.2.x Updated

istvan

17-12-10, 07:21

MultiCAS v1.62E -C08 15.12.2010

-----------------------------------------------

MOD : More Improve about new server of CCcam 2.2.x
FIX : Fixed about TNT emu and card
FIX : Fixed about boxkey for NDZ3 of SkyITA
FIX : Fixed New Sky-Link (White card : Need testing..)

qwess

27-01-11, 01:50

MultiCAS_v162E-C11B_2k110124

-DATE : 2011/01/24
-Version : v1.62E-C11B
-----------------------------------------------
FIX : Fixed small bug of ECM for Irdeto

Download:
MultiCAS_v162E-C11B_2k110124.tgz (http://www.multiupload.com/U1F95ZNVL8) (608.05 KB)

qwess

03-02-11, 08:33

MULTICAS v1.62E-C11C

MultiCAS
-DATE : 2011/01/27
-Version : v1.62E-C11C
-----------------------------------------------
MOD : More improvement about DRE-Cr*pt for CCcam and Newcamd

Download:
MultiCAS-v162E-C11C.tgz (http://www.multiupload.com/5J3QL2L57P) (608.26 KB)

qwess

10-02-11, 20:16

MultiCAS
-DATE : 2011/02/08
-Version : v1.62E-C11D
-----------------------------------------------
FIX : Fixed minor bug about log-in part of Newcamd
FIX : Fixed about make to slow something by CCcam
MOD : More improvement about EMM for Cryptoworks Card

Download:
MultiCAS_v162E-C11D_2k110208.tgz (http://www.multiupload.com/CW03QVZMUC) (608.45 KB)

iceman

08-03-11, 13:25

Cu ultimele versiuni de Multicas nu mai vrea să-mi mearga nici in ruptul capului Sky UK, cu toate că am linie bună. Cred că asta are legătură cu implementarea in prio.caid a chestiei cu "pre fix hops" pentru NDS, cu toate că alte pachete criptate in NDS merg.
Am incercat cu o versiune mai veche de Multicas (A10 parcă) şi Sky UK merge fără probleme. Nu inţeleg de ce nu merge pe versiunile actuale de Multicas, posibil să fie ceva configurat greşit. Vreo idee?

valerica

08-03-11, 14:34

Sensul la pre fix este ca decodarea sa se faca NUMAI din hop-ul ales prin configurare in priocaid.cfg .
Exemplu :
09xy : 1
Va deschide pe providerul 09xy NUMAI din hop 1 .

iceman

08-03-11, 15:53

Mersi valerica, dar ştiam acest lucru. Totuşi, nu-i dau de cap, de ce nu vrea să deschidă Sky UK. La voi merge?

valerica

08-03-11, 17:19

La mine merge cu 1.0.18 meditel si multicas 1.62e-d01 in functie de hop-ul selectat pe orice prov. n*d*s ; optiunea e chiar buna , intrerupe f. rar acum . Testeaza si cu 1 si cu 2 si nu uita sa-i dai reboot dupa fiecare modificare , trebuie sa mearga ...
Uite cum arata la mine priocaid.cfg :

0D05 0664 09cd 0963 1810 1880 1702 09C4
0100 : 006A 006C 0068 4101 006D 3315 0085
093b : 0
09c4 : 1
0963 : 1

Bafta

iceman

08-03-11, 21:18

S-a rezolvat problema! Am trecut la providerul 963 hop 3 in prio.caid, i-am dat un restart și acuma merge. Inainte era pus un # in față, ca de altel la toți ceilalți provideri și probabil că asta a fost cauza.

qwess

25-03-11, 19:54

MultiCAS-v162E-D01C
date:20110324
changelog:

More improvement about Found Best Server for CCcam.

Added mode 'CCCAM_NEWCAMD_WORK_TOGETHER = 2' it's using for Local Server Client + CCcam + Newcamd.

download:
MultiCAS-v162E-D01C.rar (https://www.rapidshare.com/files/454366816/24-03-11_MultiCAS-v162E-D01C.rar) (614.9 KB)

dingo31

31-03-11, 21:30

Regula 12

As vrea sa stiu si eu daca ai reusit sa pui cardul de tvr cu cccam si newcs
cu cccam nu merge, merge doar cu mgcamd+newcs

qwess

19-05-11, 12:15

MultiCAS-v1.70

-DATE : 2011/05/18
-Version : v1.70

--- How to use Re-Sharing of CCcam share ---

Use one CCcam account for more Azboxes with MultiCAS

1. Azbox connected to CCcam server

a. Get CCcam account.
b. Go to Plug-Ins->OpenXCAS->MultiCAS and smart Card Splitter & CS Menu
c. Select Mode as Server and set the sub-menu as follows ;
- My IP Address : this is the IP adres of your Azbox. This will be the server IP address in the client.
- Port : 3000 (default value) - Please set the value between 1000 and 9000.
- Time Out : 2.0 sec (default value). If you use more clients this time-out value must be higher. Please keep it below 4.0 seconds.

- Save the changed values by pressing RED button on RCU.

2. Client Azbox

a. Go to Plug-Ins->OpenXCAS->MultiCAS and Smart Card Splitter & CS Menu
b. and select Mode as Client and set the sub-menu as follows ;
- Server Domain Name Use : OFF (or ON if you use DNS.)
- Server IP Address : Set the IP address of the Server STB.
- Server Domain Name : If the Server Domain Name Use is ON, put the domain name.
(if you use local share between Azboxes in your house the Server IP Address will be like 192.168.xxx.xxx)
- Port : 3000 (default value) - Please set the same value with that of Server STB.
- Time Out : 1.0 sec (default value will 1.0 sec, but 3.0sec will be better)
- Check Server : Press OK button for checking the Server STB. If the server information is correct, you will see Server CAS ID : 0x0000.

- Save the changed values by pressing RED button on RCU.
- Go to TV and check the channel is working well.
- If you would have more sets to use Client please follow the above procedure again.
- If the TV channel on Client STB is not working please try to adjust the value of Time Out.

Update sau download cu MAZ

qwess

11-06-11, 09:06

Multicas v. 1.70B
-DATE : 2011/06/10
-Version : v1.70B

MOD : More improvement about Hops control for NDZ (CCcam)
ADD : Add support Timeout limit control for CCcam, this for Found Best Server or Found Best ShareID (see example-timelimitcaid.cfg)
ADD : Show Entitlement for NDZ card (can found at /tmp/card_slot.info)

download cu MAZ!