PDA

View Full Version : AU cu oscam/cccam/smargo



proteus
14-04-10, 12:44
Salut,

Am incheiat un abonament nou si trebuie sa trimita un update la card - asta inseamna AU, corect? Cardul e un Seca3, am un PC Linux cu oscam si cccam 2.0.11 legate cu o linie N. Mai am un Kathrein pe care am mgcamd si incubus, de obicei folosesc mgcamd legat la cccam pe server si un DM500.

Linia N intre cccam si oscam este:
N: 172.30.1.1 12001 login pwd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Linia C intre mgcamd si cccam este:
F: kathrein_user pwd 3 0 1 { 0:0:2 } { } { }

In oscam.user am setat "au = smargo01" pt. acel user, unde "smargo01" este label-ul din oscam.server. In CCcam.cfg nu blochez nici un emm, nu am nimic la "B:"

Ce ar mai trebui configurat pt. a face update la card? Am lasat Kathrein pe canalul pe care a zis providerul ca trimit update, dar la "Entitlements" in oscam nu s-a actualizat inca data expirarii.

Este vreo problema daca mgcamd e legat la cccam, sau ar trebui sa-l leg direct la oscam pt. AU?

siemens
14-04-10, 17:25
Update-ul la card vrei sa se faca des sau ai nevoie urgent acuma?

Katy nu are cumva combinatia newcs+mgcamd? asa ar fi cel mai usor pentru urgent...

proteus
14-04-10, 17:36
Nu e chiar urgenta, cardul imi arata ca mai e valabil 1 luna, dar vreau sa fiu pregatit si sa primesc actualizarile de pe noul abonament. Ma intereseaza o solutie pe termen lung.

Preferabil ar fi sa mearga automat, daca nu se poate atunci merg si solutii "quick fix". Ce imi sugerezi? Pe kathrein nu am nici cardreader nici CI, dar are DM500 cardreader intern.

Am incercat si cu mgcamd de pe Kathrein legat direct la oscam, dar nu am vazut in loguri nici o urma de EMM AU - desi eu am tot inititat reactualizari de pe site-ul furnizorului.

prodigy
14-04-10, 17:46
in /var/keys/mg_cfg ai configurarea pt EMM la mgcamd :

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
- aici jonglezi tot ce tine de EMM, posibil sa nu ai setat aici klumea si de aceea nu trimite EMM catre oscam.

proteus
14-04-10, 17:59
Sa stii ca ai dreptate, l-am schimbat in 01 si acum imi apar EMM-uri in log la Oscam, chiar daca nu le intelege complet. Si vad ca si la entitlements s-au schimbat datele.


2010/04/14 15:52:02 19581 r03 [seca-reader] EMM: Congratulations, you have discovered a new EMM on SECA. This has not been decoded yet, so send this output to
authors:

Ma uitasem si eu la optiunea asta, dar am crezut ca 03 e suficient. Ceea ce demonstreaza ca "a citi" si "a intelege" sunt totusi lucruri diferite. Multumesc inca o data.

lao
10-09-10, 12:12
Cardul de akta 0500:024f00 face update in ubuntu/oscam/phoenix cu linie N data in Vu+duo/BH1.33f/mgcamd1.35a+newcs1.67, dar la mine nu a vrut ieri ci numai dupa ce a expirat subscriptia, adica azi.
S-a actualizat imediat.
Fisierul /usr/keys/mg_cfg arata asa:


# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 04 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 02 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 15 } 1080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }Linia C din cccamd.list a fost comentata

lao
29-09-10, 12:33
Cu aceleasi setari de mai sus face update si cardul 1880.

Bamboo_ro
22-01-11, 23:28
Zilele acestea cardul de jiji caid 1802 si-a facut AU in combinatia cccam 2.1.3 si oscam 3558.
cardul este intr-un smargo.