View Full Version : Compilare oscam
Pentru cine doreste sa-si compileze propriul oscam
STEP – BY – STEP - TUTORIAL
NEVER COMPILE AS ROOT!!!
Testet and working on ubuntu 9.10 and above!
Content:
manual.pdf
make.sh
changelog.txt
oscam_config_example.pdf
Actual supported build-platforms:
– UBUNTU >= 9.10
– DEBIAN
– FEDORA >= 11
– OPENSUSE >=11.0
Actual supported host-platforms:
– ARM-COOLSTREAM
– MIPSEL-FRTIZBOX
– MIPSEL-DREAMBOX
– PPC DREAMBOX/DBOX2
– MIPSEL-DD-WRT
– SH4-DVBAPI
– SH4-STAPI
– I386/X64 PC
– NSLU2 UNSLUNG
– MIPS-FONERA/ATHEROS
– MIPSEL-AZBOX
– ARM-DOCKSTAR
Download (http://www.easy-share.com/1914600893/oscam-easy-build.v0.6.5b.tar.gz)
Versiune noua 0.6.8f, cea de mai sus este V 0.6.5b
v.0.6.1
- libusb-smartreader-support fixxed (many thx to thE_29)
v.0.6.1a
- pc build with libusb fixxed
- coolstream build fixxed
v.0.6.1b
- typo error-message pc-libusb fixxed
v.0.6.1c
- Makefile: "ds_opts=... -Winline -Wextra -Wall" deleted (not longer needed)
- setup correct default config-path on each platform (hopefully all correct)
v.0.6.1d
- fritzbox7390 build fixxed
v.0.6.1e
- sh4: liboscam_stapi.v0.08 added
v.0.6.2c
- libusb fixxed #2
- pcsc fixxed
- some typo's fixxed
v.0.6.2d
- svn checkout BACKUP REV 4800 added (option 1-get/update svn)
v.0.6.2e
- alternate dl-src for dreambox/ppc/ddwrt/nslu2 added
v.0.6.3
- oscam-svn online check optimized
v.0.6.3a
- oscam-svn online check optimized part2 (thx thE_29!)
v.0.6.3b
- oscam-svn online check optimized part3
v.0.6.3c
- coolstream/azbox/dockstar-pcsc typo fixxed
- oscam-svn-onlineupdate-check set back again to 'ping'
v.0.6.3d
- ddwrt-libpath default changed to '/opt/lib'
- oupdatecheck revert to wget
v.0.6.3e
- mainsetup: option 'do_onlinecheck added'
(turn on if you'll be sure oscam-svn is online and updateable!)
v.0.6.4
- onlinecheck small fix
- mainmenu: 7-7 "easy-specials/Get-oscamSVN-Backup" added
v.0.6.4a
- onlinecheck next fix
- (x)do_onlinecheck set to default: ON
- libusb fixxed again? please test
v.0.6.4b
- libusb next fix (please try!)
v.0.6.4c
- small typo fixxed
v.0.6.4d
- buildALL: PCSC build fixxed
v.0.6.4e
- oscam-http error fixxed
(will now auto get new by svn-up!)
v.0.6.4f
- redefined pcsc-warning fixxed
v.0.6.5
- easy-specials: 7-8 create MY_OSCAMS-megapack added
- some small code fixxes
- BUILD_OLD folder added
- some path/foldernames optimized
v.0.6.5a
- oupdate EasyBuild.conf Fritzbox fixxed
- some path/foldernames optimized
v.0.6.5b
- easy-script code optimized
(Folder *_OLD no longer needed, you can simply manual rm them without probs!)
v.0.6.5c
- make.sh line 25-37: there you can change default-oscam-config-paths for oscam.conf/user/server etc.
...
###########################################################
### setup here your default oscam-config paths.... ###
###########################################################
DEFAULTCONFIG="/var/keys"
DREAMBOXCONFIG="/var/keys"
AZBOXCONFIG="/var/keys"
COOLSTREAMCONFIG="/var/tuxbox/config"
DDWRTCONFIG="/usr/local/etc"
DOCKSTARCONFIG="/usr/local/etc"
FONERACONFIG="/usr/local/etc"
FRITZBOXCONFIG="/var/media/ftp/uStor01/addons/oscam"
NSLU2UNSLUNGCONFIG="/usr/local/etc"
PCCONFIG="/usr/local/etc"
PPC_DB2_DREAMCONFIG="/var/tuxbox/config"
SH4_DVBAPICONFIG="/var/keys"
SH4_STAPICONFIG="/data/keys"
###########################################################
###########################################################
...
v.0.6.5d
- 7-8 easy-specials: create megapack fixxed
v.0.6.5e
- code from v.0.6.5c (setup default conf-paths) MOVED NOW TO: ../oscam-svn/EasyBuildScript/EasyBuild.conf
(please change if needed paths than in EasyBuild.conf!)
v.0.6.5f
- onlineupdate small fix
v.0.6.5g
- onlineupdate small fix2
v.0.6.6
- onlineupdate small fix3
if you say "N" on question: "Activate DEFAULT EasyBuild.conf"... it's your own risk if not all working,
if "N" and build-error you must manual del EasyBuild.conf and restart make.sh again!
- pcsc updated to v1.7.0 (thx thE_29)
(pcsc-values can be changed to old in EasyBuild.conf:
###PCSC##########
PCSCVERSION=1.7.0
PCSCDLID=3527
CCIDVERSION=1.4.2
CCIDDLID=3518
###OLD_PCSC#######
#PCSCVERSION=1.6.4
#PCSCDLID=3337
#CCIDVERSION=1.4.0
#CCIDDLID=3333
################## )
(if "external_Libs"-folder already exists... please del them manually before you start make.sh for using new PCSC!)
- 7-8 create megapack optimized
- toolchaind dd-wrt renamed to DDWRT
- many code fixxes part1
v.0.6.6a
- many generall code fixxes part2
v.0.6.6b
- many generall code fixxes part3
- openssl revert to v.0.9.8 (most platformas actual using it!)
- all platforms now also have libcrypto.a AND libcrypto.so (thx thE_29)
(if libcrypto.so on your os allready exists: dont replace them with these *.so generated by easy-script!)
(for using old way only *.a (oscam-binary would be bigger): del *.so on "../external_libs/os/lib", an build again!)
(with *.so oscam-binary would be smaller! )
(if you have already build before.... please del "../external_libs/os" before start 1time v.0.6.6b!)
v.0.6.6c
- many generall code fixxes/optimized part4
v.0.6.6d
- (0)-OSCam-Setup-MainSetup: (x) with_libcrypto_so -libcrypto.so en/-disable-option added (default enabled)!
(x) = libcrypto.so.0.9.8 used instead of libcrypto.a (oscam binary smaller but needed libcrypto.so.0.9.8 on running platform!)
( ) = libcrypto.a used instead of libcrypto.so.0.9.8 (oscam binary bigge but NOT needed libcrypto.so.0.9.8 on running platform!)
v.0.6.7
- many generall code fixxes/optimized part5
v.0.6.7a
- many generall code fixxes/optimized part6
- ddwrt-pcsc build fixxed
v.0.6.7b
- many generall code fixxes/optimized part7
- ccid build fixxed
v.0.6.8
- TP-LINK MIPS-AR71xx platform added (thx thE_29)
v.0.6.8a
- secure check for EasyBuild.conf + .../external_LIBS is actual
- many generall code fixxes/optimized part8
- with_ssl build fixxed (now small binaries available too! (x) wit_libcrypto.so must be acvitve!)
- fritzbox 7390 outsourced to sep. folder (build(fritzbox7390, external_libs/7390) please test!
v.0.6.8b
- many generall code fixxes/optimized part8
v.0.6.8c
- many generall code fixxes/optimized part9
- ccid-ddwrt fixxed
v.0.6.8.d
- fritzbox 7390 build fixxed
v.0.6.8e
- libcrypto.off fixxed
v.0.6.8f
- ddwrt: libcrypto.off fixxed + libcrypto build fixxed
Download (http://oscam.ump2002.net/board/attachment.php?attachmentid=7047&sid=8bcf8038e46194c9c48dfebdbc3a4b55)
Hi I am looking for exacetly this but the latest link does not work link for v0.6.8f Regards
v.0.6.9
- coolstream: dvbapi fixxed
v.0.6.9a
- coolstream: libnxp.so fixxed
v.0.6.9b
- ASUS-WL*** Platform added (only static, K24 ok, K26 untestet (K26 setable by Main-Setup)!!!)
- many generall code fixxes/optimized part11
v.0.6.9c
- buildall: fritzbox fixxed
- logfiles deactivated. All output now in terminal. On error see terminal-output
v.0.6.9d
- coolstream: fix libnxp.so sym doublecheck
v.0.7.0
- coolstream: pcsc fixxed (thx thE_29!)
v.0.7.0a
- fritzbox ALL update!
(gcc now 4.6 so old user must del their chain(s) in "../toolchains" and also easybuild.conf and start from beginning!)
v.0.7.0b
- small static-build fix
v.0.7.0c
- with_ssl build fix
v.0.7.0d
- many generall code fixxes/optimized part12
v.0.7.0e
- many generall code fixxes/optimized part13
- megapack: libssl added
v.0.7.0f
- webif OIA modfied (showing now under configuration -> files, Default are normal!)
- add file /oscam-svn/EasyBuildScript/EasyScript.patch (needed for patching webif-oia!)
(you also can easily put your own diff's in too if you have one ;) )
- many generall code fixxes/optimized part14
- ddwrt default without libusb/pcsc: lrt + ldl added (please test if cccam login ok now!)
- oscam binary easier identifying by name: OSCAM 1.00-unstable_EasyBuild_svn build #
v.0.8.0
- pcsc updated to 1.7.2
- ccid updated to 1.4.3
- EasyScript.patch updated
- Show Memory in Webif now optional, for turn on set: 0-mainsetup -> (X) Show_MEM (default off)
(thx gorgone)
If not 1st time build:
Please del "../oscam-svn/external_LIBS" folder and also del "/oscam-svn/EasyBuildScript/EasyBuild.conf" !!!
than do svn-update by: 1-y-y
OTHERWAY IT WON'T WORK!!
v.0.8.0a
- EasyScript.patch fixxed
- Easyconf check updated
v.0.8.0b
- EasyScript.patch del (not longer needed!)
v.0.8.0c
- webif oscam-http.h: Headline Size corrected to 15px
v.0.8.0d
- globals.h:
clientmaxidle-entry corrected (max 9999 default)
clientimeout-entry corrected (max 99999 default)
take care to set both to your preferred timeout in your config!
(if nothing set 9999/99999 are default!!!!)
- oscam-http.c:
webif-shutdown-restart corrected (set restarttime to 5 seconds for better refresh without 404)
v.0.8.0e
- many generall code fixxes/optimized part14
- get toolchains dreambox+nslu2unslung fixxed.
- add toolchain ppc-tuxbox-dbox2_old for: PPC Tuxbox Old (Dbox2, Dreambox 500/600)
(first do: get toolchain 4-13 than build-single 2-14, 1st time chain will build-finished and that takes some time ca 20mins up to 1h))
PLEASE TEST IF BINARY WORKING ON DBOX2!
v.0.8.0f
- showbuild_* off on fixxed
v.0.8.1
- clientmaxidle revert to 120 also clienttimeout reverted (fixed by Admin on svn, so patch no longer needed! many thx!!)
- dockstar: set build to static so on openwrt+debian working
v.0.8.1a
- webif: optional with Logo -> 0-mainsetup (x) With_WebLogo, default OFF (NO LOGO)
(x) Webif must also active for use!
if you want use different logo: edit make.sh line24 -> MYWEBIFLOGO="http://your/favorite/logo"
v.0.8.1b
- asuwsl: build libusb/pcsc check if always there fixxed
v.0.8.1c
- mainsetup 0 -> (x)With Loadbalancing added, default ON!
v.0.8.1d
- dvbapi ON/OFF fixxed
- mainsetup 0 -> (x) AntiDisconnectClient->camd35 only add, default OFF!
(if activated and using camd35-proto clients stay connected, unitresting what clientmaxidle= say!)
v.0.8.1e
- 0-mainsetup: (x) LCD support added, default off
v.0.8.2
- dynamic threads oscam svn support added.
for use set make.sh row 26/27:
#MYSVN="branches/dynamic-threads"
MYSVN="trunk"
to
MYSVN="branches/dynamic-threads"
#MYSVN="trunk"
NO support, no questions will be answered if using these test-branch for build!
do not mixxing by svn up the normal trunk with dynamic!
v.0.8.2a
- check linux-packages: cvs added
v.0.8.2c
- sh4-stapi: libstapi v.0.8a added (>=#5773) (thx _network)
v.0.8.2d
- OIA build fixed
v.0.8.2e
- general code fixxed part 15
v.0.8.2f
- create megapack: tar.gz renamed
v.0.8.3
- create megapack: some small gz fix on fritzbox
- fix menuentry/code against ppc-dreambox
- ../EasyBuildScript/EasyBuild.info added (detailed overwiev of supportet receivers/routers etc...)
(hopefully ok, if not please give me a note on streamboard @
http://streamboard.gmc.to/wbb2/thread.php?goto=firstnew&threadid=28878
)
v.0.8.3a
- ppc_old dbox2/dream, ssl deactivated! won't work on these old lib*.0.9.7!
v.0.8.3b
- build all: dvbapi/stapi on/off first round fixxed
v.0.8.3c
- get nslu2unslung chain fixxed
- new repository(git) for ppc_old added (old cvs.tuxbox.org down!) [thx seife!)
v.0.8.3d
- oscam-svn-rev > 5620 showWebLogo fixxed
v.0.8.3e
- oscam dynamic build fix ppc-dream
v.0.8.3f
- oscam dynamic build fix ppc-dream update
v.0.8.3g
- oscam unstable: webif-version-info size fixxed
v.0.8.4
- oscam dynamic build fix i686 libusb (thx _network)
v.0.8.4a
- sh4 build fixxed
v.0.8.4b
oscam unstable: version update to 1.20
v.0.8.4c
- add stable 1.10rc build:
make.sh line23-29:
______________________________________________
### dynamic-threads SVN ###
#MYSVN="branches/dynamic-threads"
### unstable-trunk SVN ###
MYSVN="trunk"
### stable SVN ###
#MYSVN="tags/1.10"
#############################################
_______________________________________________
remove "#" for your preferred build BUT DONT MIX IT!
always use for each MYSVN an empty folder and place make.sh in than do 1-Y !!!
v.0.8.4d
- ALL: remove anti-disconnect from config (not longer working)
v.0.8.4e
o-update ALL: fix MYSVN= if not default!
v.0.8.4f
- ALL: build fixxed
v.0.8.4g
- ALL: build fixxed part2
v.0.8.5
- config: ipv6support (WebIf IPv6 support) added (experimental see timeline)
v.0.8.5a
- oscam-setup->mainsetup fixxed
v.0.8.5.b
- fritzbox70**/71**/72**: freetz-trunk-gcc updated from 0.9.29 to 0.9.31.1 so please del old "../oscam-svn/toolchains/freetz-trunk" also del "easybuild.conf" and "external_LIBS/Fritzbox" and rebuild!
or revert on make.sh to old:
# old number
#FRITZGCCNUMBER="0.9.29"
# new number
FRITZGCCNUMBER="0.9.31.1"
v.0.8.5c
- fritzbox build: little cosmetic
v.0.8.5d
- fritzbox7390: set back to correct gcc 0.9.29
# old number
#FRITZGCCNUMBER="0.9.29"
# new number
FRITZGCCNUMBER="0.9.31.1"
FRITZGCCNUMBER7390="0.9.29"
v.0.8.5e
- fritzbox7390: little cosmetic
v.0.8.6
- fritzbox build: seperated 7140/70 + 7240/70 + 7390
- new entry in 0-oscam-setup -> FritzboxSetup
please activate there your preffered fritzbox, than 4-get_toolchains and build for them by 2-2.
(note for 7240/70: take care you have also updated your Fritzbox-Firmware to actual ones(uclibc0.9.31.1)! if not oscam binary can give segfaults!)
v.0.8.6a
- pcsc updated to 1.7.4
- ccid updated to 1.4.4
(please del external_LIBS -folder and easybuild.conf than start make.sh again for using new pcsc/ccid)
easybuild.conf:
###PCSC##########
PCSCVERSION=1.7.4
PCSCDLID=3598
CCIDVERSION=1.4.4
CCIDDLID=3579
v.0.8.6b
- all boxes with internal-CR "SCSI_DEV" now generally activated!(dreambox, azbox, coolstream, ppc-dreambox, ppc-old-dreambox/dbox2)
v.0.8.6c
- DEV_SCI SPECIAL for sh4 boxes add (see main-setup!)
(if need sh4-internal-CR support activate: ONLY sh4 entry, else NOT-SH4!)
on build-all for ALL sh4 SCI is off so if needed use singelbuild-option ONLY!
v.0.8.6d
- DEV_SCI_SH4 fixxed
Orice versiune oscam-easy-build poate fi descarcata de aici :
http://www.streamboard.tv/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
(necesita logare)
v.0.8.6e
- WD(LX)TV LIVE Platform added, please test if binaries working on it!!!
v.0.8.7
- wdtv hopefully fixxed (switched toolchain to wdtvtools-svn!)
- some small code cleanup
v.0.8.7a
- coolstream int. Reader fixxed
- wdtv chain for test linked to dmm-mipsel-toolchain
(for wdtv build you must 4->get-toolchains-dm-mipsel done!
static-build-wdtv only possible WITHOUT libusb!)
for wdtv please del:
/oscam-svn/EasyBuildScript/EasyBuild.conf
/oscam-svn/BUILD/WDTV
/oscam-svn/external_LIBS/WDTV
- oscam.to svn-mirror added
(will auto used if streamboard svn down!)
v.0.8.7b
- svn mirror fixxed
v.0.8.7c
- oscam rev# name fixed
v.0.8.7d
- buildall fixxed
- wdtv fixxed
783
oscam-easy-build.v0.8.7 e
v.0.8.7e
- ubuntu 11.0 fix
Download (http://www.oscam.to/wbb3/index.php?page=Attachment&attachmentID=11112&h=2bff3172a876d8d9bc98754fa7ac361be024fdf2)
Black_Angel
30-03-12, 12:54
ar putea si mie compila o vers de Oscam
oscam-svn6576-mips-tuxbox-webif-Distribution.tar
in oscam-svn6576-mips-tuxbox-webif-Distribution.nab.tar
din pacate - nu inzeleg deloc cum se face - adica nu sunt in stare
Ceea ce vrei tu este de fapt arhivare in format Nabilo, pentru autoinstalare si nu are treaba cu compilarea.
v.1.0.0
- switched to new make-gfto
- sh4-stapi not longer supportet
- azbox build default off (as it's to old gcc-3.4.2, very tricky install those old compiler to distribution)
v.1.0.0a
- 3-build-all fixxed
- switched to new coolstream-chain, it's finsihed chain so no need to build from coolie-svn (thx gorgone)
v.1.0.0b
- pcsc build fixxed
v.1.0.0.c
- some code cleanup, warnings fixxed
(please del Makefile.local, than do 1-y-y-y again)
v.1.0.0.c
- pc i686/x86_64 libusb build fixxed
v.1.0.0.e
- libusb set to 1.0.9
- readd scsi_dev(sh4) to main setup again (maybe these reacvtivate internal readers please test)
v.1.0.0.f
- show_info fixxed
Ai dreptate, in concluzie hai sa mai actualizam informatiile necesare si sa le completam mura-n gura:
Necesar:
- masina linux cu ubuntu, fedora, opensuse, debian (cazul meu)
- se verifica existenta pachetelor necesare:
apt-get update
apt-get upgrade
apt-get install build-essential
apt-get install subversion
apt-get install cmake dialog
Oscam pentru masina curenta se poate compila si ca root:
cd /home/lao/
svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn
sau daca se doreste o anumita versiune
svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn -r 6197
Apoi
cd oscam-svn/
mkdir build
./config.sh -g
Apare o fereastra in mod grafic
http://img404.imageshack.us/img404/1056/86681340.jpg
Alegem Add-ons si apare
http://img651.imageshack.us/img651/7527/14348480.jpg
Alegem optiunile necesare cu space bar apoi Enter
Trecem la urmatoarea
http://img515.imageshack.us/img515/840/32368097.jpg
De obicei alegem numai protocoalele care dorim sa le folosim
Apoi
http://img20.imageshack.us/img20/7483/63594899.jpg
La fel, lasam selectat numai readerele pentru care avem card. Salvam iar cu Enter, ajungem in fereastra initiala, selectam Save si Enter
Apoi
cd build/
cmake -DWEBIF=1 ..
make
Gasim binar-ul oscam dupa ce se termina compilarea in /home/lao/oscam-svn/build/
Va urma
Compilare oscam pentru receptoare, routere, etc
Necesar= acelasi
IMPORTANT
Nu compilam ca root, ne logam pe un cont de user
su lao
Descarcam si dezarhivam scriptul de compilare oscam-easy-build.v1.0.0f.zip
Acesta contine 4 fisiere, scriptul make.sh, 2 fisiere PDF care contin explicatii si exemple si changelog.txt
Urmatorul pas este sa verificam/modificam cate ceva in script
Deschidem cu un editor scriptul, de preferat notepad++ si incepand cu linia 1051 avem
default oscam-config paths
Verificam daca calea default e corecta pentru device-ul nostru, daca nu, modificam
DEFAULTCONFIG=/var/keys
DREAMBOXCONFIG=/var/keys
AZBOXCONFIG=/var/keys
COOLSTREAMCONFIG=/var/tuxbox/config
DDWRTCONFIG=/usr/local/etc
DOCKSTARCONFIG=/usr/local/etc
FONERACONFIG=/usr/local/etc
FRITZBOXCONFIG=/var/media/ftp/uStor01/addons/oscam
NSLU2UNSLUNGCONFIG=/usr/local/etc
PCCONFIG=/usr/local/etc
PPC_DREAMCONFIG=/var/tuxbox/config
PPC_DB2_DREAM_OLDCONFIG=/var/tuxbox/config
SH4_DVBAPICONFIG=/var/keys
TPLINKCONFIG=/usr/local/etc
ASUSWLCONFIG=/opt/etc
WDTVCONFIG=/etc
In cazul meu, pentru care voi continua explicatiile, mipsel Enigma2 e gresit. Asa ca modific:
DEFAULTCONFIG=/etc/tuxbox/config
DREAMBOXCONFIG=/etc/tuxbox/config
Eu am modificat si linia 22
MYWEBIFLOGO="http://tinyurl.com/69v5jqq"
asa, pentru ca nu-mi trebuie poze, sa am ecranul mai liber
MYWEBIFLOGO=""
Bineinteles, puteti sa mai faceti si alte modificari, asta daca stiti exact ce trebuie :)
Acum facem pasii din postul anterior
cd /home/lao/
svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn
cd oscam-svn/
./config.sh -g
Configuram
- Add-ons
- Protocols
- Reader
Apoi salvam
Daca va este necesar, nu uitati sa bifati Have Dvbapi
Copiem scriptul make.sh in /home/lao/oscam-svn/
ii dam atribut 755 apoi il rulam
./make.sh
Acum intram din nou in mod grafic
http://img96.imageshack.us/img96/9395/46497493.jpg
tastam 5 si Enter
Daca e cazul, va trebui sa instalati/actualizati pachete din linux
Dupa aceea Enter pentru a reveni in meniul anterior
Tastam 4 si Enter
http://img507.imageshack.us/img507/4129/15541863.jpg
tastam 2 pentru Dreambox mipsel enigma2 (fiecare tasteaza pentru ce are el)
incepe sa descarce fisierul de care are nevoie, e specific pentru fiecare device
Toolchain_mipsel-tuxbox-linux.Dreambox.tar.bz2
si
openssl-0.9.8.tar.gz
in /home/lao/oscam-svn/Download/
0-Oscam setup nu mai functioneaza si ne invita sa rulam:
./config.sh -g
ceea ce am facut deja
In 6 putem vedea niste informatii despre optiuni compilare
http://img809.imageshack.us/img809/373/38765778.jpg
in 7 mai exista niste optiuni
http://img269.imageshack.us/img269/2486/61575055.jpg
Dar nu-s uzuale si nu prea avem treaba cu ele
tastam 2
http://img72.imageshack.us/img72/2549/84286972.jpg
apoi 1 (cazul meu)
Incepe compilarea
fisierul binar este in /home/lao/oscam-svn/BUILD/DREAMBOX/DEFAULT/WEBIF/
sub numele oscam-svn7083-DREAMBOX-DEFAULT-WEBIF
Multi blameaza oscamul. Intradevar, e stufos si greu de controlat comparativ cu 3C. Dar si realizarile posibile sunt altele!
Nu am pretentia ca stiu, doar "sap", si mai gasesc cate ceva interesant prin el.
Imi cam prind urechile prin surse, totusi mai iese cate ceva bun, functional sau de fatada!
Modificand in surse inainte de compilare poti sa schimbi multe, numai ca trebuie sa stii ce faci!
Un exemplu, doar de efect...
Linie C din oscam in 3C apare asa in phpinfo din cccam
http://img507.imageshack.us/img507/3075/laoj.jpg
sau
http://img521.imageshack.us/img521/8148/nopay.jpg
laleauaneagra
28-06-12, 17:31
din cate stiu numa daca pui vers de 2.1.1....in alta nu merge
daca erai atent aparea si la mine cccam-laleua:)
---------- Post added at 16:31 ---------- Previous post was at 16:30 ----------
apropo iti multumesc din nou ptr acel MURA IN GURA de mai sus
ca vad ca tot dispare
Buna,am gasit si eu pe youtube cum se face.
Dar vad ca mai e pus filmul pe 2 forumuri..daca nu e voie se poate sterge(odata cu userul meu normal)
Toate cele bune
Adresa Oscam a fost schimbata. Inlocuiti in URL gmc.to cu de.vu
Exemplu:
svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn
svn co http://streamboard.de.vu/svn/oscam/trunk oscam-svn
http://streamboard.gmc.to/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
http://streamboard.de.vu/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
v.1.0.1.a
- build fix
(please del also all in /Patches, than 1-y-y-)
v.1.0.1b
- fix 3-build all
- fix fonera showbuild on/off
v.1.0.1c
- fix internal-CR-support for mipsel+ppc+sh4, thx gfto
(not needed for activating by osd, it will auto do it!)
v.1.0.1d
- hd+ turnout fix, thx irata
v.1.0.1e
- update to new oscam/streamboard url
(please start make.sh in new empty folder, otherway it wont work!)
Am gasit un alt script, poate mai simplu de utilizat si am trecut pe el
Stie urmatoarele:
supported platforms
-native if compiler installed x86 x64 arm (dockstar)
-dbox2, dreambox 500,500-S
-dreambox 600,000,7020
-dreambox 500HD,800,800se,8000,7025
-openembedded 2.0 + new toolchain (gcc4.7 64bit build)
-fritzbox 33XX
-fritzbox 72XX
-fritzbox 73XX
-raspberry pi hard fpu
-raspberry pi soft fpu
-powerpc
-dockstar
-coolstream
-sh4
-sh_4 (new toolchain gcc 4.6.3 64bit build)
-tplink (1043ND)
-fonera
-ddwrt 2.4
-ddwrt 2.6
-openwrt 3.4.6
-openwrt 4.1.0
-arm nslu2 unslug
-arm nslu2 openwrt
simplebuild 1.07
IMPORTANT
MUST INSTALL THIS PACKAGES BY HAND
dialog
uni2ascii
xz-utils
subversion
awk gawk or mawk (gawk is debian default)
lib32z1 (for 64bit)
NATIVE
libusb-dev for libusb support
libssl-dev for ssl support
cd /opt
mkdir simplebuild
cd simplebuild
wget http://ss4200.homelinux.com/oscam/simplebuild
chmod 777 simplebuild
./simplebuild checksys
./simplebuild menu
Daca apare o versiune noua de script te anunta la pornire si poti face update, descarca oscam ultimul/versiune aleasa, meniuri simple si intuitive, viteza sporita la compilare
Tnx @ Gorgone (Streamboardler )
Se poate actualiza din script sau
wget http://ss4200.homelinux.com/oscam/simplebuild
simplebuild 1.16
-fix typo
simplebuild 1.15
-size check changet
simplebuild 1.14
-SVN online check changet
simplebuild 1.13
-adding a little bit fun for the console users (bouncing wait coursor on build)
simplebuild 1.12
-fix build sh4 with nostapi (thanks basta2k for report)
simplebuild 1.11
-add local remote compare to skipp checkout if equal (menu version)
-change internal script structure with separate departments
simplebuild 1.10
-tryfix relinking lib path
simplebuild 1.09
-openwrt26 ddwrt410 reactivated
-small fixes on commandline mode
simplebuild 1.08
-extended "./simplebuild checksys" now all packages
simplebuild 1.17
-try fix relink paths in console build (latte0815 reported)
Download (http://www.4shared.com/file/tPlzMFEH/simplebuild.html)
simplebuild 1.26
please clear the toolchains/config/* if u have some trouble
-config.extra used by default
-pcsc console enable
-extra custom_suffix used on console and pack
-fixed directmenu="1" start with ./simplebuild menu
-set back to default on empty custom_suffix
-new console commands (if u have enabled on extra u can now disable on console)
dvbapi_on dvbapi_off
static_on static_off
stapi_on stapi_off
pcsc_on pcsc_off
usb_on usb_off
ssl_on ssl_off
pack_on pack_off
La adresa:
http://ss4200.homelinux.com/oscam/
instructiuni si sursa de la simplebuild
s-a ajuns la 1.32
simplebuild 1.33
-add Synology Marvell 88F628x Toolchain with usb ssl pcsc and static support
-oscam-svn url now in var editable for using mirrors
-delete oscam-svn (urlchange to .tv)
start with ./simplebuild menu
simplebuild 1.34
-add TOUCH WEBIF (console support later)
rm -rf toolchains/configs
simplebuild 1.35
-add TOUCH WEBIF (console support later)
-console checkout extension with revnumber (first try)
rm -rf toolchains/configs
./simplebuild checkout 7123
simplebuild 1.36
-add MODULE_CCCSHARE (console support later sorry no time now)
work with saved !
first of all; if u have problems, begin with a empty directory and simplebuild script only
CROSS COMPILE ONLY WITH x64 or x86
Again, thanks Gorgone (Streamboardler )
simplebuild 1.38
-first try to fix ./simplebuild debinstall
(this installs all needet packages i think)
-another bugfix prepare for the new releases
laleauaneagra
12-10-12, 21:21
sper ca sa rezolvat problema de compilare ptr dm500
cel putin eu nu am reusit deloc sa fac ptr dm500 cu 1.36
Cu 1.36 am compilat eu de 2 ori pentru cineva de aici. Si i-au mers ambele...
Poate nu ti-a mers:
DOWNGRADE PACKS FOR PPC-OLD / DBOX2
ppcold-ssl-0.9.8 (http://anonym.to/?http://ss4200.homelinux.com/oscam/ppcold-ssl-0.9.8.rar) ppcold-ssl-0.9.7 (http://anonym.to/?http://ss4200.homelinux.com/oscam/ppcold-ssl-0.9.7.rar)
just replace the files in the toolchain
ppcold e pentru dm 500
laleauaneagra
12-10-12, 21:42
am facut si eu la inceput pe urma incepand cu vers 7688 parca nu a mai mers nimic..naiba stie
vad ca si acum cu 1.38 sta sa ia toolchain ptr dm500 de vreo 10 min
reinstalat de vreo cateva ori..nimic
doar la 500 am problema asta..in rest ok
pfff
greu dar a mers pana la urma..vreo 15 min..
simplebuild 1.41
-allways menu remove
-begin with
./simplebuild reset_all
-now all packages buildable on 32bit and 64bit
-removed uni2ascii
-replaced ppc-tuxbox-old now with ssl 0.9.7
-replaced sh_4 toolchain (no 64bit needet anymore)
-rewrite simplebuild.config (please check ur own paths)
-first try to fix ./simplebuild debinstall (missing package installer ,this installs all needet packages i think)
-fixed typos
PS Salvati arhiva si ce mai doriti ca sterge tot!
simplebuild 1.42
-begin with
./simplebuild reset_all
-now all packages buildable on 32bit and 64bit
-removed uni2ascii
-replaced ppc-tuxbox-old now with ssl 0.9.7
-replaced sh_4 toolchain (no 64bit needet anymore)
-rewrite simplebuild.config (please check ur own paths)
-first try to fix ./simplebuild debinstall (missing package installer ,this installs all needet packages i think)
-fixed typos
-found update bug fixed now
-simplebuild.config update
first of all; if u have problems begin with a empty directory and simplebuild script only
simplebuild 1.43
-OpenWRT Brcm63xx toolchain addet incl. consolemode
-config update (change ur paths)
-add staging enviornment to build
-new header option deldebug this delete the binary.debug enabled by default
-changed Binary info on menu build now its waiting for enter
cd /opt or cd /home/ur_username
mkdir simplebuild
cd simplebuild
wget http://ss4200.homelinux.com/oscam/simplebuild
chmod 777 simplebuild
./simplebuild debinstall (look for errors)
./simplebuild menu
simplebuild 1.44
-fixed a bug found by pr2 (configpath save)
-fixed bug save and restore ssl build in menu mode
-config change for nlsu (horsti58 reportet thanx)
first of all; if u have problems begin with a empty directory and simplebuild script only
CROSS COMPILE ONLY WITH x64 or x86
PCSC SUPPORT ONLY FOR
-fritz33xx
-fritz72xx
-fritz73xx
-openwrt26
-ddwrt346
-ddwrt410
-marv_6281
-native
cd /opt or cd /home/ur_username
mkdir simplebuild
cd simplebuild
wget http://ss4200.homelinux.com/oscam/simplebuild
chmod 777 simplebuild
./simplebuild debinstall (look for errors)
./simplebuild menu
simplebuild 1.46
-add dream_hw toolchain console support
simplebuild 1.45
-add dream_hw toolchain (menu build only ,console next release)
-add "build.log viewer" in build menu
simplebuild 1.47
-add orginal oscam config support (now with reader support)
-set debug mode & delete debug into simplebuild.config
first of all; if u have problems begin with a empty directory and simplebuild script only
CROSS COMPILE ONLY WITH x64 or x86
PCSC SUPPORT ONLY FOR
-fritz33xx
-fritz72xx
-fritz73xx
-openwrt26
-ddwrt346
-ddwrt410
-marv_6281
-native
simplebuild 1.48
-fix console build
simplebuild 1.49
-fix build again *grml*
simplebuild 1.51
first of all; if u have problems begin with a empty directory and simplebuild script only
-enable deldebug="1" in console mode (this parameter is to set in simplebuild.config)
-first try to implement the next very simple console build
cd /opt or cd /home/ur_username
mkdir simplebuild
cd simplebuild
wget http://ss4200.homelinux.com/oscam/simplebuild
chmod 777 simplebuild
./simplebuild debinstall (look for errors)
./simplebuild menu
just type
./simplebuild mipsel
to fetch extract and build a mipsel binary (without config it takes the default)
supported platforms :
-native (if compiler installed on ANY SYSTEM)
-dbox2, dreambox 500,500-S
-dreambox 600,7000,7020
-dreambox 500HD,800,800se,8000,7025 vu+ clones + derivate
-openembedded 1.6 & 2.0
-fritzbox 33XX
-fritzbox 72XX
-fritzbox 73XX
-marvel 88F628x
-raspberry pi hard fpu
-raspberry pi soft fpu
-powerpc
-dockstar
-coolstream
-sh4
-sh_4 (new toolchain without segfaults)
-tplink (1043ND)
-fonera
-ddwrt 2.4
-ddwrt 2.6
-openwrt 3.4.6
-openwrt 4.1.0
-openwrt brcm63xx
-arm nslu2 unslug
-arm nslu2 openwrt
simplebuild 1.54
-add a new toolchain check system for console & menubuild (it can have some bugs !!!)
-libsearchdir is now saved in profile (please report)
-build optimisations add -Os & USE_LIBCRYPTO=1 for a smaler binary size
-renamed dream_hw to dreambox_fpu
-fixed name in consolebuild (thnx ChiefOBrien)
-enable deldebug="1" in console mode (this parameter is to set in simplebuild.config)
-very simple console build just type
simplebuild 1.56
-add (for starting clean without lost of toolchains)
./simplebuild clean
simplebuild 1.57
-fix libsearchdir thanks for report *hk2k2*
-add (for starting clean without lost of toolchains)
./simplebuild clean
simplebuild 1.61
- finaly i made dynamic toolchain menu only installed toolchains are selectable
adding toolchains on ADD menu
- config_path now saved
(complete rewrite of lib-path & config-path save and use hopefully also on consolebuild)
- add BACK menupoint to ADD Menu (thanks FilipeAmadeuO)
simplebuild 1.62
-bugfix remove line end spaces results multiple parameters sometimes
simplebuild 1.63
-fixed ubuntu build (i hope) ./simplebuild debinstall
-bugfix remove line end spaces results multiple parameters sometimes
simplebuild 1.64
-add intcheck to simplebuild.config and default disabled
this maybe help to fix the *buntu problems
simplebuild 1.67
-dynamic toolchain remove & add menu ( first shot maybe beetle ;-) )
-bugfix directory creation & delete
-adding package lib32z1 for 64bit to ./simplebuild debinstall
simplebuild 1.68
-now u can test the patches from the trunk or here from the forum with less knowledge
just create directory patches and putt the patch into (name must be *whatever*.patch)
after that u can now use 2 new commands
./simplebuild patch_on
./simplebuild patch_off
WARNING !!! ITS NOT CLEVER TO ADD MORE THAN ONE PATCH(SET) but possible
simplebuild 1.70
- after alot of work here is the NEW full auto patch system
no extra parameter required
just create a patches direktory and put a *whatever*.patch into
& enable the patching system in simplebuild.config with "1"
work for console & menubuild (except for debugmenubuild)
- new BRCM63xx & tplink toolchains integrated ssl usb static possible
- fixed an old static console build error
WARNING !!! ITS NOT CLEVER TO ADD MORE THAN ONE PATCH(SET) but possible
simplebuild 1.71
-add MatrixCamAir support (console & menu) ./simplebuild mca
-add config editor for simplebuild.config (console & menu) ./simplebuild cedit
simplebuild 1.72
-add online update switch disabled by default
simplebuild 1.73
-fix for mca ppcold (add missing reset var)
simplebuild 1.77
-add patch logging to build.log
-add --stdout to fix tty
-removed cancel button on cedit
-add dos2unix convert (fixes windows lfwd)
install it with apt-get command or use the simplebuild debinstall function
apt-get install dos2unix
simplebuild 1.78
-add patch logging to build.log
-add --stdout to fix tty
-fix broken online update (use wget or zip sorry)
-removed cancel button on cedit
-add dos2unix convert (fixes windows lfwd)
install it with apt-get command or use the simplebuild debinstall function
apt-get install dos2unix
simplebuild 1.82
-fix for multiple patches cmd & menubuild
-incrase updatetimeout to 10 seconds
-found firststart bug for usermode, now fixed
-more stdout fixes for the *buntu sh....
-add stop parameter for automated batch fetching for toolchains
./simplebuild cool stop
./simplebuild mca stop
./simplebuild dreambox_fpu stop
this fetches and install 3 toolchains
simplebuild 1.83
-add azbox support (no_ssl/no_usb)
simplebuild 1.84 & config update 1.29
-add Powerpc Q / QI support
simplebuild 1.85
-add *.diff support in patches
simplebuild 1.86
-fix pcsc native build
simplebuild 1.87
-fix2 pcsc native build
simplebuild 1.88
-patch function change
-fix pcsc native build
PCSC SUPPORT ONLY FOR
-fritz33xx
-fritz72xx
-fritz73xx
-openwrt26
-ddwrt346
-ddwrt410
-marv_6281
-native
simplebuild 1.89/config 1.29
-patch function change
-fix pcsc native build
-console pcsc build fix
simplebuild 1.90/1.30
-fix toolchain azbox
-fix toolchain fritz73xx
-add toolchain brcm63xx_other for non openwrt
last version
ScriptVersion=1.90 CONFIGVER=1.30
vodafone station hg553 with DLINK firmware (DVA-G3672B)
AGA/agpf pirelli with original pirelli firmware or dlink firmware
PCSC SUPPORT ONLY FOR
-fritz33xx
-fritz72xx
-fritz73xx
-openwrt26
-ddwrt346
-ddwrt410
-marv_6281
-native
cd /opt
mkdir simplebuild
cd simplebuild
wget ss4200.homelinux.com/oscam/simplebuild
chmod 777 simplebuild
./simplebuild debinstall
./simplebuild menu
S-au facut modificari in svn si e necesar sa descarcati scriptul din nou, a fost revazut deoarece peste r8199 nu mai merge, da erori orice compilezi.
latest ok 8199 i fix today
wget ss4200.homelinux.com/oscam/simplebuild
simplebuild 1.92
-change old/new config saving functions
-comparative fault fixed
-add more checks to prevent errors
-add alot of bugs maybe http://www.streamboard.tv/wbb2/images/smilies/lool.gif
simplebuild 1.93
-fix stapi checkout on console
-now u can upload ur cam after build to ur box or other device
-u need to install sshpass
-the upload use scp copy encrypted over ssh !! not ftp !!!
-just simple like ever
./simplebuild upload FILENAME
this FILENAME needs the following content
my box example
loginname="root"
password="dreambox"
ip="10.223.8.10"
copy_tmp="/tmp"
box_camdir="/usr/bin"
boxcamname="oscam-stable1.00"
toolchain="dreambox_fpu"
restartcmd="camdctrl restart >/dev/null 2>&1"
command_set="cd $copy_tmp; [ $buildcamname ] && rm $box_camdir/$boxcamname && mv $buildcamname $box_camdir/$boxcamname; $restartcmd"
simplebuild 1.94
-fix stapi checkout on console
-fix logic error
-now u can upload ur cam after build to ur box or other device
-u need to install sshpass
-the upload use scp copy encrypted over ssh !! not ftp !!!
-just simple like ever
simplebuild 1.96
-fixed online check & download bar for french users
-confupdate check fixed
-uploading code cleaned new example ..
dreambox1
loginname="root"
password="dreambox"
ip="10.223.8.10"
toolchain="dreambox_fpu"
command_set='\
cd /tmp;\
[ -f $buildcamname ] && mv -f $buildcamname /usr/bin/oscam-stable1.00;\
camdctrl restart;'
simple to understand
1. cd /tmp goto tmpdir
2. if exist cam overwrite /usr/bin/oscam-stable1.00
3. cam restart command
IMPORTANT command set must use singlequote ' not doublequote "
& all commands must be separated by semicolon
simplebuild 1.97
-fixed online check & download bar for french users
-confupdate check fixed
-add sshpass to debinstall/checksys
-fix typo on upload thanks (ChiefOBrien)
simplebuild 1.98
-fixed online check & download bar for french users
-confupdate check fixed
-add sshpass to debinstall/checksys
-fix typo on upload thanks (ChiefOBrien)
-add buildcamname check
-uploading code cleaned
svn config change 8323
rm toolchains/configs/* and create a new one with menu
La 1.98 si ultima revizie (de fapt, 8232) e un bug cu SSL.
<Gorgone> from sslvar="#define WITH_SSL" to sslvar="#define WITH_SSL 1"
simplebuild 1.99
-fixed config change 8323
rm toolchains/configs/* and create a new one with menu
./simplebuild checkout
simplebuild 2.0 rc2 32bit build on 64bit
wget http://ss4200.homelinux.com/oscam/simplebuild2.0/simplebuild2
Noile versiuni au o optiune foarte interesanta: " COMPRESS".
Este foarte utila pentru dreambox sau routere (sau alte "masini" unde sunt limitari de spatiu) pentru ca bin-ul este comprimat (in functie de ce optiuni aveti salvate) cu pana la 60%
(EX: bin-ul meu pentru dm800, cu setari minime are 295,316 bytes dupa comprimare)
Pentru comprimare se foloseste UPX, in caz ca nu intelege cineva cum de e posibil :-)
Pentru cine vrea versiuni compilate la zi de-a gata,pe toate "gusturile" :)
http://download.oscam.cc/index.php?&direction=0&order=mod&directory=1.20_TRUNK
simplebuild (2.05/1.33)
changelog 2.05
-online update exit the script after update
changelog 2.04
-add language select to first menu & console (./simplebuild lang_select)
-add italian language
-add arm_cortex_a9 toolchain
-full build controll for ALL oscam components
now u can ad and remove everything on oscam
u dont need a config
simplebuild (2.07/1.34)
changelog 2.07
-fix saved custom default automatic (please test)
changelog 2.06
-add sheevaplug support
-change online update system
A ajuns la 2.27
simplebuild 2.27 + config 1.37
-fix sh4 stapi (thanks hapeba)
-change build to -fno-short-enums thanks depp0n
su
cd /opt
mkdir simplebuild
cd simplebuild
wget ss4200.homelinux.com/oscam/simplebuild
chmod 777 simplebuild
./simplebuild debinstall
./simplebuild menu
simplebuild 2.29 + config 1.38
-add 2 new toolchains
1. OpenWRT 12.09 Attitude Adjustment (ulibc) NOPCSC
2. OpenPLI 4.0 (all mipsel, openssl 1.0) gcc 4.8.1 openssl 1.0
simplebuild 2.30 + config 1.38
add Debian Wheezy install info
-add 2 new toolchains
1. OpenWRT 12.09 Attitude Adjustment (ulibc) NOPCSC
2. OpenPLI 4.0 (all mipsel, openssl 1.0) gcc 4.8.1 openssl 1.0
3. fix patches from outside of oscam-svn (blacky cwc patch example)
Prea tare acest script. Interesant ca poate face si compresie. Mi-a redus oscamul compilat de la 740kb la 230 :).
simplebuild 2.31 + config 1.39
-add 3 new toolchains
fritzbox 33xx 71xx 74xx with ssl usb pcsc
-add url support for external / other trunks look here (http://www.streamboard.tv/wbb2/thread.php?postid=483526#post483526)
-add stinger-reader to commandline mode
-some fixes on translation
simplebuild 2.32 + config 1.39
-removed revision check in menu & console
simplebuild 2.33 + config 1.40
-update all Fritzbox toolchains (delete folder & backupfile or begin clean)
-add Fritzboxtoolchains for v6 ntpl (73xx 74xx)
simplebuild 2.34 + config 1.41
-cosmetic update for Fritzbox Toolchains os 6.0
salve,
am si eu o intrebare :
- foloseste cineva un oscam pe win7(am probleme cu o clona de dm500s, care nu mai lucreaza reteaua pe ea),
si incerc sa folosesc share local cu rec-uri care folosesc porturi seriale(rs232).
cum pot sa folosesc oscam-ul pe pc, si sa cuplez recurile pe serial direct din oscam, plus sa adaug o liniie externa,
server si client.
Multzam
incearca si fara simplebuild(fa-l manual) si vezi daca da tot asa
salve, de mai bine de o luna, incerc sa sa pun niste conserve la treaba. am incercat cu fausto , oscam ,...
.... se pare ca am sa le prezint o pubela noua.
in fausto a deschis periodic, citeva secunde si se bloca. folosesc un win7/64, pe care am pus si oscam, care culmea
imi arata ca sunt cuplat la linii, dar pe serial nu cupleaza rec-ul. am folosit optibox cx pvr , opticum 4160cx.
clona de dm500 am desfacut-o se o mesteresc, ca numai vrea net(ethernet), dongle pentru optibox cx ,
numai se vede nici pe net, nici pe serial, am asus rx3041/g si vreau sa fac din el un server oscam si i-am adaptat
port serial, dar nu gasesc o schema sa-i adaptez un stick , are flash de 64M, mai am un router asus 520g, cu cuplajul wan
defect, dar pot sa-l folosesc wireless, si as vrea sa-l folosesc cu oscam client, si sa scot din el port serial pentru opticum 4160cx.
cine ma poate ajuta? fac cinste
multumesc mult
salve,
completare la ce am scris mai inainte:
- optibox cx pvr em* 1.19.56
- opticum 4160cx cr amstr. led 1.4.03
Salutare,
Aici se gaseste versiunea moderna de la oscam(asa-i spun ei pe forum)
svn checkout http://www.streamboard.tv/svn/oscam-addons/modern oscam-svn
Compilare placuta
simplebuild 2.35 + config 1.42
-fixed toolchain for Golden Media ARM_Cortex_A9
Incearca cu winXP @mesterica, trebuie sa mearga fara probleme.
Versiunile de osc customizate de mine le puteti gasi aici (http://oscam.infosatelit.org/osc/).
Momentan e doar ultima versiune moderna care include:
--- 3 patch-uri private:
- 2 de NDS(it,uk)
- 1 pt cache.
--- multe setari default schimbate pt un randament mai bun
--- versiunea de ccc 2.0.11 este R.S.P
Pt Cine stie ....pricepe ce e aici... .."e doar un exemplu"....reader-videoguard2.c...deci se poate(NU-L FOLOSITI)
http://pastebin.com/7hWMH8yq
tabela de hash e diferita.. si la prima vedere...sare peste citeva emm-uri... valabil pt "o9cd" si "o93b" bun pt alde mascalzone...
problema "noastra" cu D3 74 ( 23 +11 ) inca nu a rezolvato nimeni.. si nici nu cred ca o sa o rezolve curind....
Ca o completare la thread, pentru cine doreste sa compileze oscam si nu are linux, exista solutia VMware Player sau VirtualBox care sunt free, instalati unul din ele le (daca aveti Windows 8 aveti deja Hype-V si nu mai instalati nimic), instalati ce linux vreti in masina virtuala, luati scriptul de compilare oscam, va setati oscam cum va place, si build pe ce arhitectura vreti. Eu folosesc VMware excesiv (e super sa poti sa faci drag & drop la fisiere din windows in linux si invers, copy&paste also). Bafta!
pff am gasit aseara un link dar l-am pierdut..era ceva de pe la tvheadend unde am dat si de nano si alte parti de cod in plus fata de ce e in oscam(pe langa zona unde e definit 5581) ...
Avand in vedere ca uk si it s-au indulcit si ei....in curand(2,3 luni) o sa fie lumina pe toate inclusiv pe bomba noastra de dolce
---------- Post added at 18:18 ---------- Previous post was at 17:32 ----------
DOWNLOAD (http://oscam.pizda.nu/archiv/)
Editia RSP toamna-iarna CLEAN!
Customizat pt RSP
Salutare,
Cum se schimba calea ConfigDir: /etc/tuxbox/config/ din oscam version?
Am incercat prin compilare dar nu se salveaza calea data de mine
| OSCam ver: 1.20-unstable_svn rev: 10998 target: mipsel-unknown-linux-gnu
| Tools:
| CROSS = /opt/simplebuild/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-
| CC = /opt/simplebuild/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-gcc
| Settings:
| CONF_DIR = /media/hdd/oscam
| CC_OPTS = -Os -ggdb -pipe -ffunction-sections -fdata-sections
| CC_WARN = -w
| CFLAGS =
| LDFLAGS = -Wl,--gc-sections -Wl,-rpath,/lib -Wl,-rpath,/usr/local/lib -Wl,-rpath,/usr/lib -L/opt/simplebuild/toolchains/mipsoe20/mipsel-unknown-linux-gnu/sysroot/usr/lib
| LIBS = -lpthread -ldl -lrt
| UseFlags =
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
| Readers : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI STAPI5 STINGER
| Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.15.2) 4.6.3
| Config : build/mipsel-unknown-linux-gnu/config.mak
Multumesc.
Pui parametru in linia de comanda de la compilare:
CONF_DIR=/var/keys
Se poate edita in fila de config dar asa e mai lesne.
Nu pot pune linia in terminal pentru ca se compileaza pe interfata.........am optiunea de schimbare a conf_dir in respectiva interfata numai ca nu se aplica la terminare compilatiei.
Editeaza Makefile la randul 38 :
CONF_DIR = /usr/local/etc
Buna tuturor,un tutorial cum sa construim propriul oscam,ce comenzi avem nevoie,se poate?
M-ar interesa sa compilez oscam pentru receptorul Amiko A5 Combo,aveam un OSEbuild.sh care a functionat dar acum nu mai e actual.
Ceva idei? Multumesc.
https://github.com/gorgone/s3_releases
pune-l pe un linux...si faci cum îti place...
Da mirel,cunosc s3_releases si-l folosesc pentru un procesor Broadcom insa nu are Toolchains pentru Amiko A4-Amiko A5(Android).
Am nevoie pentru Amiko Android.
Exista ! se numeste Android NDK ! si se genereaza corespunzator
versiunii tinta de Android !!! eu l-am folosit cu ani in urma !!!
De atunci s-au schimbat multe. Exista pe net un script OSEbuild.sh care a functionat pana nu demult. Acum da cu eroare.
Un exemplu actual de comenzi sau cum compilam un oscam pentru Amiko Android?
cum zice MihaiP exista Android NDK...ce eroare îti da scriptul?
încearca: https://github.com/xheen908/OSEbuild/blob/master/OSEbuild.sh
mie îmi merge fara probleme:
1820
https://www.sateliti.info/image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAeYAAAEFCAYAAAA2Q0TjAAAgAElEQVR4nO3dP2gb6/7v 7dDOqdIfMDmGhOi2LmF2DHH 14byykMYcawoltsRH5pVqFOQZXcbFL4Vx4V4ddIlVjqdCGNrxG7URZkRMDFso2y2QZ7o ImjkIwOlhwsnwhqnWLmZFGsi3JfzW2Py8IRPpq/mgs6dHzzOj5DFmW1UBERESujGmeXLtzdbshIiIivahhFhER8ZE79yZDGIaBYRiEJu8Nen9ERERuhHzCxDQT5KunW 7Oz71NisUiW5X65eyZiIjILRRJW8SDp1/ubj8PmgwZBIbt/9d2d HpU0brFYqbe6qrrrrqqquu gl1VzWfIJopO7fCwDIn6dkwT4YMRmtbFPd AmNMG0d3SnXVVVddddVVP75RbgmTtJaZ4zxXZd bZJQKm3s/nTsO2Nmtqa666qqrrrrq3epNZTJRk j6IpbTKPdy quy63W6no1WXXXVVVddddWbwuEwlL9T6rasR/eG eceNUbxXqw99jjAsOqqq6666qqrfnK9KcjDV8tYSVgxU301znenDYPR5s15jABAjd3iDgfA3m6N0LxBwH1IrYa3s6666qqrrrrqq h t5xMmmXKQOFDaKACwYhYIxnPAOCcZOv2UnGNMh 6xc LJbdVVV1111VVXvZtuF3 dqmEemzZ46navj7nyTHXVVVddddVV73Zltu3CGmYRERE5P4VYiIiIXBN9zfwlIiIiF nkLrN6zCIiIj6ihllERMRH1DCLiIj4yIWcYy6lTFYKzo1gHCsdaavbP7J2boTDhCsPWfY8pnP53OI6qxNplvuZVPR8O47Z3HBr 537f9nc5x M50hHjv7ovFu97dg6Oh/Xdf3VPIlohtYqWpOsi4jI1Tt3w1xKmayQxLLsj/JqPoGZoNm4VfMJ1hdzWOlxz PjzcCr45aPZsqEk fdsz7MLZOLV3jLm2aDVUqZJPLzxzaQl6GaT9jPP7lBYv/09c6GtJpP8PZUywPhJNalfwsSEZF 3A0ZBsNAbbfIDtMYT0eBOpWtTZqhGSep5nlXiWOlWx/q45E0ye8mqVLk2B7v3LKF5V2e9kZhPJLG8nZYO3q1zV6f29MLBgmXyxQIk0zCykqB8/T65l7Febe6T3O6tM4epadH7e3pB M50hOrrX1t63mXSJkr9j527Nd4JG0fj9LGsfvTqx5Jt2d6bq0H DXd lLRa3kREbkEnrYjnLRYxm3LgsRz6a6L3tncqlCnTr1OMxmjtttHowxUt9Zhcf7I/XMLYSr7VcBuGBbXo5imaf9L5FsP3P8ODyd6bGWBpGVhOf8W16OkSsB4hHQuTrBchqRlTxC AknLIhevsNFvjEeH/NsMgYU5z 11FnOt7ecW15vPYW7ZIhcPtr4szC1jJcN2D/SKh8MBqOZZDyyc/gtJYaX19 lzknUREenCbaMI2s3cxEOCQDiZpteA7F1 7rG5hTMRd53KVrGvRvk0ImkLt5nqHOruaWKfd YKK567wt56MG73zEtA2G6Uqs2i21Pt1N5zLWeimBl3dTnSrXFh1stlylGTTNvyAUrAHDAe ZWAuUopYq8v/65C/E17LxbmWLYsOu 9aNWtdQIL3b JHTEeIe0doiilMFMlDW2LiJzXeIR0DhJRkwxB4jmrZ6MM7jnm4WEnqmqY4WGgz4Z5fH4R3m5BpL2RLW0UCCwc3wyNR34lnNmwG7a Jh/Du6PKeNZGK2j3WdHNkOcFqf7tHvw1is8dbSmGutBpZxicIBOOku36JmONV/B2rJZgjRSbwK9bVnJ4 Yms9wGnb5SPmFgi/2wdd/iUicn77351ToWW e86SdnPn3mQI4ynsFosUi7vw1CDkDZjsZjzCr4EMZqo1 FnNJ1ipOL1YSqTMBPmqZ5nqPhWnZ sun2h7QImUadrD1dV9KsHF1jeMap63nZcgXyTnYrCV5vOZY HI/h01HvkV3uXt3vKr4xo0 zld6jDxGYex8wmz7flV8 8oBHqdXhARkV6q QSmc4rVsgOZe7YnAEONRqMBnRd/Qb2yxWafY9on/1zquKFk 8S3tzvf ZOfcNJqXjjmXqXtLhsOQ6FQJhyPU8k4F2WFk1gLG5grds7lG946V3Zb3X9y5b2wzLPf YRJho7bbd8Hjl7EVc0niH7/9YQh4JMv/mo7ds1DdPwFZsfVvds/7idm/Szf9vwG8HMxEZGbxtt2tV/8ZY/SljPRE5dVupSIiMgVM7vES2nmLxERER9RwywiIuIjaphFRER8RA2ziIiIj6hhFhER8RE1zCIiIj6ihllERMRHzt0wV/OJZgBCPzOaiIiIXAeTIQPDCNHvZJgX5dwN83gkbacuxYMXsT8iIiK sLdZpFIfwIZ/NmwHO1bD2jlwbv1sfN20GpbV/79cPNgIxnPH1uJBGmD/CyeTjTA0CMZVV1111VVX3df1rz/t9nDzq9taNhqNxkHvdjEXbwSb67UaVjLsbCfYiOes5jaP 3d3c6tCaH7UzmPGzmOu95nH3I98wmR9MYeVHqc5Z3THvNSqq6666qqr7rf6UTV2izscnFBt04x8XLfzmLHzmANOHnOmy6J37DzmG qPzBsb8KLWtIjt9bbUP1TzrxO1IRQDmWE6GVVddddVVV93f9aZhAvMG86M1iv02yq7xCOncIutRE9OJMO4n6t4 x9yZx3yZJuxvDaqrrrrqqqt Heq1Wg2GhxnrtuxJOvOY 3C POZexiMsst6Wx1xadaIaVVddddVVV92v9aY69a872M3j9Kka57PmMd dDwwDw4yNwQFjjAIE5gnRTx5zZ95yFDMD3rziyJtFElGzNZ4eDuMdLFBdddVVV111P9YnQwaB4ToVYGxsFICnhsHjSu/2sZXHXGajtMwcG3ZbmYmSINd12QHkMZdIJfZZPvHkuuqqq6666qr7sX5xuuUxX2nDXEqZrLjd62OufFNdddVVV111P9Yvmm8aZhE REeneMGuubBERER 5O gdGKQuX1guhGX5e/tyvV3260fkPPT5c3bqMYuIiPiIGmYREREfUcMsIiLiI2qYHQupEI2GQaMRIrVwmiXHeN8waDQMPqeuOLRTZMBa75vur//Y 9vw/nA Cz5PXvia zt F7v92Pv Pw9vx9/36qhh9viS3mJoaJPljdMsdcCLoSLP0oMI7RQZrI3lTYb6eP1nXxR5snxBkXW dcCLoV1 v4Q193f8Lnb72RdF0l/6f zN//tenTshw8AwDKbHgLFpDMPAMEL0NV12NU/CNDFNk1QJKKUwTRPTTNDHdKAC8Pgjjf/INv99/u HbeXU5yyNRpbPqUMWUms0GlkajY/EFrb53MjS LzGe/e 2MdWfUBPR65YbLrZYz2u15r63Lq/1budJrYwyeeGQeNzyBnxmSbWXNf0hb1 uvWo3dr7997n0Np2s 7cYffgPOtxn4P7mOb n2LUq8vx67V/nfvg3VfXicf/mMccV s5ItFj 531I73pHq8fAP7iXUf7se13xORaujfJoNrHO5tbFerU7Tzmup3HXOs3j3k8QjoXJ0jQzpt0kjnCTt6k9OMxr/ fGEPOv8L/tsr7x63q8pMYQ6 nmEqs8kd4kqGhGEOv4W9/meHJs1m TP2A1/Z9v/0Gr4diPEv/4G9qmW JA14PFRly/hXC820fzstPigy9rjGVmOePcM1 3Gv421/2ePKswpepYXhd9Lx ijxLD1/Y66dbj3pjeZNn6Tq//ELzOTxLD/N35wPerbuyL zn0lqB8xyo8// G/h3nS/A769PM p18vHrtX8wxvs/Rik8c5ffhd e8otn7Scef2cbqc8G4cJWc/tDr E3T PZfUSi9/ZTOW 9yLPCaEfj3P31A8MkfvOs41mN8B tLw/9jphcSz/3GFT7eNfeOITmDQLUqWwV 9to28ZxJgIPEs9ZapRP4//7k7//xwd 89x13FDUl/Qrnizft29kn/MCYAH4MsuLLBADfn9M1rlbbol/3 Pvjad9vH62WkON2R3P66fief0cdLx xnjfaP gt9V4PbRD9oKewu vW vaKNfpnsvXYWOPJ8/g8x8GCeqknxU9jXIf 9/H8Ttx/2JjPEnv8qK5vQNePLvH52PyCY4//pOEP2DwFnd3j9txCphb3eXy56bX9hkvDUMFN/GCTaFhwmBqd4/p4vOht7RNMh/jMG2Yt6AfjZgNpHe4KRzjzm054q6MybVMPcp2 8f75H4WOM5f9l37Pw39f4z8HulFwbrR6T 8G5kApd4OvngBdDp4qFH4y/DDMFwDD/ 18Ab0PVdf8v /gN2MZPPn p8OTJ3gkP6Of5O6MRt9kA2sdz5zGfNW9SgP/2J09 TjYbZf7bNrknPwa6S3KNLNzjyZdaqzezMEkuMTzQXboMT4Kec8q/jbbVFlIhGr 5Q8278NspznWe9/hlD/iceNx2Tjj2nwHnS0IfNvYoPHnccT58jL89qfU3FN9z wf843Pg5OPR1/MfJpHzDH0vTJJL1PnHbegtA4NqH8 Vx9wrbzKtMe3u/tcM0f 5RuM/Pjl3jPD7/xzhl/8jy3tivPj6jfeND85Q3BcaznjU769jvPj3Np// MQU0Hj/gKF/AL984HPqFVHgl9 yFIs60XyjbewRLYRoNALOHXV /73OL78ZvKfIi6x3KHfU8/op8uLfk3z I C8fn46r5 nfE7VndePu45uO9A5VDzvbMMdKu5e/3cqxB JYcDZFtM0fhsFRvmMPfS7sVqDP9zl6qTTNRKJeT6zRZSnzvL2OfEsY/a2nHrPq4R7HL//Eey1fwe8eD1Go2G0hoJ/r/H7VIDGZxh68vPk4 8c1 VozRmGb/n9dbHP49tr 3tkXxQJfjaa27Y5y/d4/v/4m0Fiqs7vv4 2PSb9bNMZ2uf9fdvckQl9k dnOr06W8cw0vpELk2D3zJf/HLa 5suUyaa5s8TN9/nSndKk TSXmzzzByB83cAhRRESu3q1Ol/LaWN5kaPksS16TC2RERORaUI9ZRETER251j3nQ50AGvX253vT6EbmZ1GMWERHxETXMIiIiPqKGWURExEfUMDuq cQZk7FKpJwEkZs249m3jwbZbIjtw/4eu7Z9w9JlpDdPgo79L0Vp0Pskcs3d6ou/OgXjZ5mtbI5ly JVPsHbS9mrwXn0vMjsj1Dfj310ubsjfhVOYi3PDXovRG6MuyHDYBio7RbZYRrj6ShQp7LVR7RVNU8imqEMhJMWy6QwVwpAkHhO0Y 99KaVgpdC6Hc/hPXDbawaffsDI7BYGT1n9NAzUWHpV55 rAX6M1Jn6McwXaiwtwYcPo3Y9tmM3lIeTrK0GaM7APVIh9tIzqf23abIfWvMPj8xu8XKm4w/fto46s682mXGCrg63Q84 nbCsXK6S 56zdX65zCdMMmX7/je8daYIDJPMPeRdNEM5GCRcLlMgTDIJKysFu24tQ8psvjSD8RzpidXWtoJxrHTk6p6nyFW7N0loPnBp7WM3dze3KoTmR 28Sey8yfqp8iYhEV238yax8yYDymM hQWwPDObJEyYsMDpgMy8LDLzbZrsh3lWRyrEYnvwbZqPh3u8fAVrqwFYKhJjmuwHWIoVub8d4l/f4NEj2C6OMvmqyEtPQ5pdw9M4H7QacewvAh8fFHnu3sEwnz6MMuuu43CStdVpHjjL3J/ZJDZjr9ed4Veu0gJJa9l9uZBPmKQmLNwObCRtESmlMFeiRINxLCsNpRSpffe9m4GkhUWqOdn RD7BagmWly1yDxO85Y3T2C9jJcHcWGjvIRdWMJvfDcJt yNybTUjHy nfcx0WVR5zIM2sQ/mSs HtfVGH 3wHOAQGKnYjeg3YOqAR87dABxOsvdjmB rBp/a1jbMN7Ab4/v3 Gf2KR881c50nKmlVg Z 3sYs62GXwZsYp935greV1D4mIe19aTnllkGqALBuN2Il4DwAnPO3a7xyK8EzFVKEbuxzb rEH z7H0AacvTcy6lMFMlDW3LzaA85tuoBNF1yFmtY5ZPdF3iVO7/ZGSkwsuXJ exflw92qP V9tj6jy4f8yi4gMlUtF1FnMWaef1U80nWL3QbczxKv6O1RLMkSIT BWr2/t7boHwu31Qn1luCuUx3zLVfQgutv5Q1Txkyhe4gQMejwROvlr68B4/Rmqt3vDhJMVPR/NYPxU9eayHkxQ/1Xn86AJ3U86muk8luNj6Bl7N8/ZCXz 28civ8C5v95ZftTe4 UT7 72af0chMHHh yAyCMpjvo3GI7CYANM92xCEcBBWTEhaMDfGx xTvgAwStYZj55aKvL8fuuCrOzHn8QeA1 esvagjgF8 WDAUpHnz4v8uWY0l7U5F4fd38OYDJHNtrJWp6bqzWUffzX49KPO1NRo22NmX20656S9 wcw72yn1nbeWi7JeIQ3iwlMz snHA5ScF4/y3MlUuaK/Z6k0HyZhZMWyxOtC1PM1ATWAlBYIfEwxxvwrANgjleL74h P9pbjqQtSJiel3AcK63eslx/ymP2gWree5HL1S8vIiK3h/KY 1TORM88wUj0EoYQRUTk9lGPWURE5IqpxywiInJNqGEWERHxETXMIiIiPqKGWURExEfUMIuIiPiIYh8drR DnzYZqzWJw9liI/3r20eDD1/a06S6PfafDy4 XcpN1/JSipV/uOlVXjftfSBy1dQweyiPuZ0/8pjbZxFTipXftKdJVW/g 0DkqimPedBucR6z3SP3bPfB49a OPs583KnbZnKXp3/86VnG/3s/0024DzmSNqTNAVsrQf4NX2KN36P/RcZGOUx32a3N4/50fMirx6EKLLrNKY7xJamyX49IPb84OgCh5PsjRzwsu3OXvt/0/kgj9lVzbMeWKD7R87p9l9kYJTHfIvd6DzmzpALV6tHf3/mKyPZx3ybsW9v/3OYWeOYRhk4rIwy8rgjwrKP/b/RBp3H7FHdWiew4G2WvSEaXp7h7z73X2QglMd8G930POYDnscO7C8RXR7z19nHdkPPNJ9GvhI7YXuVvTqP27rL/ez/TeavPOat9QBt7bJz/cXxzThczf6LnJPymG8Z5TEDdq Zf07aveW/Ht9bdoex2zbb1/7fYD7IY27tiz2MfaoR6Cvaf5GzUh7zbaQ8ZscBf518zOqfJ/eWjx/G7r7/N/48sw/ymF1Hh7EvYv9PtzqRi6Q8Zh9QHrOIiFwVpUv1SXnMIiIyaOoxi4iIXDH1mEVERK4JNcwiIiI ooZZRETER9Qwi4iI IgaZhERER9R7KNDecxHKY9ZelEes8jFU8PsoTzmdspjlt6Uxyxy0ZTHPGjKY24te8V5zO6 T03V PLFXUfHdKK9jh dvfrW8n2t/7xucR6zO8oVDocpFNx1tH9R8H5Geffbq73X31q r/XLzaU85ttMecyDymO P7PJK0KsfrKP2yOc57F9j0dO497r G2vGexNbhFzvyx8mya7Nkns5V5f6z /25vHPB5JkyOB/RSsZmP6Nl9lzvkAyr89ml5lJmg2zvmEyfpiDst9QCmFmchjpSN9rV9uMOUx32LKYx54HvPUUqthv/ gDn 6G xx/A4n2RvZbe hP9ph6WuI7cO95jE7cf0XQXnMhJOthn18IgD77g7lWS XKUfNjg/BACVgrppnPZBs76HPLZPcSJCvRpqfYyeuX24 5THfRspj9nUec8/jN2jKY 5qfIJAME66Y ha5FSUx3zLKI8Z8HMec4/jd3 PyR P2T703jnG1x 1nlexXwjlMfcwx0Igc/Ln0XiExcq7jtCaEhuVRY36CaA85ttJecyOweQxty5ccx6PeyHZKGvYpw4edTt wIxRY61jqHtqqdj3 s/llucxtz5/nMc3L64pND9/5pYt9hNm6y1mH4HmUHrkzaIzzOipJq2 1y83l/KYfUB5zCIiclWULtUn5TGLiMigqccsIiJyxbr1mDXzl9xMnRODHHHBE33IxeqcGOQITfQhN5d6zCIiIldM55hFRESuCTXMIiIiPq KGWURExEfUMDuq QSmaZ7551KmeXkznn37aJDNOv8 jp3woOnWY7LTfLuUPRG/KqV6vP5KKef1bWKaKUodyzZrqdKplm9b7qvn899/9GcD4rEvmLX3Nfx /yti8XSxd/Ofw6wcjhdsieEctJW/r20eDr4/ZZrewZpuq6yliOZc9AFDj2KuZqPmHP6OVMs1VKmWwstM 61W350 yDJuABKJFK7LM8sPm7B719cXW9 CtkGBiGwfQYMDaNYRgYRoi pgOt5kk434ZTJTzfqk/b67ylqnkwTfufc/zs24m2iJ px635o 8/qPPjT88f53CS4l6NmBrlW6lnj7Sa5 36IlaXRjW80KpMPAxS2fesp4/lz6Pb/ru1VOr43nqz7tzh9vyb67mIz6e2kYL2fey1f5374N1XVz7RWm/rWLSvw33McbV /v7dti9d3JtkUO2j8pgHaTwCOeyEKef4AZBMN4Mt7s98haxB1l1mpNLK/gU4HIYRWMsazm927bmsryREQQZuPJLGirg90mPsf4cAJEzT U2wHdLuvj/HI7 CadL87h6Mt7KJ 1j Mve/Vx6yW3fTqOaWLayFFIn95gou4PPp5Lzo3nnNnelZztzlwXgzcevEvOwSzM11z4vudfz62b50oTzmW6zZOJtAsD0CEuDbGCwViT2y bx5uT7N9SLPhPfxzmB9fhhmZ3SI289OeWKM4yYxvowrlKlX3K5QLZYLxHFZk3P4W/zZPxB3KLG1A0sJyWp5qPkW SvM93H35PvKWL8C58pC7fj5dTF70iftX2qASf8Nyc3tzLOfiVI75BnV8XnZ/edEnOsX25QTKY77F9r87/ynbb2rP8fv2dZgHf23dvv8A9ir3mPEmE41UWklF9/eYJMT24Z56zWILxlsf7uMRFml9sJc2Kjx81Xro ASsb1WJeD89Tly V96yT5z4 TTgvGi5HpTHfAvlE7ACWBY4x897AuL A/jz8OTF789sMkuAj9/ce8b4kyvKAxbfG4 kiZPxnFss8Z1W3vDEQ wPizMu7wfNc LVPImV9v7vuT6fzpsXPbdAILPafgX8ardpRjucNy/6vNsX5THfSvkEOMeP0jKwYd fiQI5iIwfPcdMjaVY 99l5uUuHz2PcfOA5abrHIqNOrnD7UPJkXTS/pmMc9vNG4ZjzjETJtkRutxt fPtX/f6RB95yOPzixB1lwsSj4fJOJ8/b3h7vs nHnnRr/Z77d8cy8mN9qtvw2HC5QxmAqz0xMl52c4fr1tedO/j22v7ujK7G Ux 4Bffy4lIiI3j bK7pPymEVEZNDUYxYREbli6jGLiIhcE2qYRUREfEQNs4iIiI oYRYREfERNcwiIiI oobZ4ec8ZrDjHte2 59xRsRrUHnH/eYxn3d55Tmfc83Kc/YV/VzKoQlGRC6P3l8XZdB5yoPe/s3R7edSd0OGwTBQ2y2ywzTG01GgTmWrj2irap5E1J57Ndw2Jd3FRsPdWKYJwSCUy0AYksBKwf6/ZU tf7gdYvWTPYX6yOxWK6wC2F4z PSjzuxsnU fRp17j8Y 2o9zbozUGaHGS6VPXW/uey8YJFwuUyBMMgkrzuvHnZKzNS1gR4IRdqRgphwkHg QybgTOx5979qPc8tBgiySdj YPZ8BzkaudKrHbs/PrYXDYQoF9/kdPTbuFJillMlKwbOei/h8K7nLcGQfe 2f86C24xtOJttW7/5tgnHvFKThI1GVrfmP2mvdjl8/27/R7k0Smg9cWvvYzZ3NrQp16nbeZN3Om6ydKm8yTpCgnTc5YedNhpXH3J9c3G6Uk5bTKGOHWcQruDPP35/ZJBYr8mq2fmTxmZdFZkeG fQJlmJFYrEisVc19lan eY85nA7xN7kll2LFVkaGebHkTXJteO 95zXj5WEFWey/Fy8wkbJfVgay7LIxYNHVhFJW8SDZTIZd5J9Cyu3yHo01Qw qOYTdh6wU08Gym0hCPm3dvqSW88trl/pUGe35zceSZOLBykUWs8vF6/wzhmydeuuuWULKxn2ruACPt8WWsfWslhcjzYDQXrtnzfdymqGILTHVEbS9j6XM1Gi64v245I0//7NPGd3H5Kw4vn7dDt /Wz/Rvu5x6DaR UxD1owDnPYDXF44UyrmFra4ZF74/4exmyIf32DR4/g/sxXRrLzZD 5D6ixFFNv cYIxu3AA f1Mwec9kyrN0 Y8Qhv4glWSzA3Z4dcBMxoM2DB7nG1esvr5TLljpAFCFCCPvKYlefcdf U5zx4ymOWs6nzoGvE4wHPYwc8d29 mya7NklMQ9kC4H6bP1FHZnEphZnI28PV4xMEgvHWsPapKc9ZrgHlMcvpDfOpONl2T2WvzuNH9v 310Jsd Y5j5z2lSU3V5nM2/ah5631AAtOFy6fOOZXCgG3JZ9jIZC59u935Tlf0vZvAOUx30ZRZwAwNQELQGEFHjo5nSsmWDt8zD7lS3MBd0i6xlLMHb6uMzUySj YbaD5qZHaLl81bw3xaNWiOZFNjKXZwSU9IroznwhIzNYHlvH4SD3O8ASczuPOc4HF5zUHCgXVP5rAzLNq8VSbTNlQdJmm1Bpnnli 32E6ZnqNu7/v7yok mPGflOQ O8ph94Lr nGN7LQRG 1XYIv3KJxLwRhdrilw1pUv16brlMds/g7J7xNm1yd4LiHjYP6Oxe8SaNELEP9RjFhERuWLqMYuIiFwTaphFRER8RA2ziIiIj6hhFhER8RE1zCIiIj6ihtnh9zzmc/s2TTZrOP9aIRctY3zMGmQ/jl39vsm15L5nUqXej6WUauYqm2aKo4s476O VnZ0H5TXDMprvjnuDnoH/OTY2LOe7PlyX UT HVudzs6ss5SrNgKu iwvfYUZiuM/HmVeybX2XgkTY7ecz/bMyAFSFrWibN95RMrEI8T/H76fQVDkJgAABNISURBVLAi7gQ/J5tbPnnbN8ccy1YSEqdJ6ehzzX0dv8vb/m2jPOZBK6WcDGZHPIf3wLlZyiOzWxg8dbKZayy9qvPP1QA/RupM/RjmCzWWluDDh1Hapuw8nKS4VyPWJVHq20eDvcktXgbGWFPDfL10yfvtp95Pnq bU ysgDjr7bOF7edJrLhzKB/NE367vohlnTx9YyllRxOm57dInLJh7kV5zcprPjPlMd9mC3YGs/tvPYp3nG/mZZHYUo0fn ZZ3avZucpL8PVwj5evKoz8GIYl 74PH xc5lezw3z95qzgcBhGhllrDmO3h1ocbof4wC4vZxRscT2dnPfbT71Xnm8pZbJCsi1vuXOSu0KmldnbnicM7H HwHcSzWHs9lNF1XyCFZKXNpWt8pqV13xmymO xSb2wVzp bCR2a1W4/lox45xPARGKjx/BHwDpg545NztOvxzmB9fhhmZ3SI28xMOJ1krTjLjxD4e/jkMX56S/fK0uczag7oa6uuiV95vH3nAcEKeLyU2KnGsdGsQ0x069vJ 0HTmHVf3K5QLZYLxHJbby3ybJ IEIOx/L0NhBdPzaZ546O6L8pq77p/ymi f8phvoxJE1yFntY5ZPnHxmxmptBra 3tMEmL7cI Z /DoeZGYG9Z8OMnav36qUb42euX9 iQPOBhvffiPR1ik9cE/t2xhuYHG1TyJ1QlPQ6G8ZvEB5THfMtV9CC62/lDVPEfGCc/p/swmswT4 M29Z4w/qSmN6ibolfd73jzgY/OW7Stv 714ejySJk7G8/gS3 kzD9gnlNd8Sdu/BgbVPg41Go0GdJ7chnrlNHmTnSe3z3qF8 AMLPYxn/A0xkF7HKtQhqQFc2Mdecy2qaUiz 9PsrYa4AfA1C6xx2NkP4y2XSQ2tVS0h7lpX0/r/pZvHw0 OA9oGzYXX/O B 28XygUWhcsda8fP9TqzfOFzouDOHbd3d//7dvpXD 0X2DW/2dHr6Hi7vWJfva/7eKmIPF4gEym0HEx1dk//7r9fVp5zV3W33HxGOEw4UKBQjDekdfseYj3 HdcvNVe72Movuv2r3decyuP XLax3ImeuKySpdyXNc8ZhERuX6ULtWn65bHLCIiN496zCIiIldMPWYREZFrQg2ziIiIj6hhFhER8RE1zCIiIj6ihllERMRH1DA7/JzH/O2j0cpSPikvuWfecq NKK/5piqlzFYW8klTdvXMS 65EeUtXzrlLd8WymP28GMes5v FIsdAHYj/fHbQdvMXf3kLffahvKabyY3vcmy7KmeSimTVKl95q1 8pJ7bUN5y1dBecu3xZ2QYWAYBtNjwNg0hmFgGCH6mg60mm/GuaVKeL41n7bXeUtV82Ca9j/n Nm3E A5flOPD5r/v/ gzo8/PX cZt7yzpka5X6Wd/OanwfOsgG5NH2 /8ILrY/ciYfB1tzPzjrsvOQzpjX1sbybt7w8f5YN9Nr8yT1qt5ZKHd bb9Y9EZdt67mIz7e2kYT2fey1f5374N1XVz7RWm/rWLSvw33McbWeIxI9tn j3ZtkUO3j3c2tCqH5UTtvEjtvsn6qvElIRNftvEnsvMmA8pj7Mx6BHHbClHP8AEimm8EW92e QtYg6y4zUiH20vPHORyGEVjLGva82dSZfbXZf0hFj WbPfaZn3CoYWxf6eP9Nx75FUyT5lQGwThW2vPm3P8OAUiYZms 6Nwp3r89lm/22CPjbV82L0q3HvV4JE2OBNEMzd58NZ/gbb7KXGS8WXfTnOaWLayFVKtDeCGfbwttEZX5hElqwh6x6LV/R9OnnLmrg/FmYlUkbREppTBXokSDcSwrDaUUqRLMzXnylt2/eSmFmcg357HuPiLRe/s3WjPy8XLax0yXRZXHPGjNxtkEgu0RkADfxmCpSOyRffNwe5rtQ1oNZ4 85V6U13zN9Xr/lTYgaeGMZFPNp8hXaTWcPfKSe1HesvKWbzTlMd9i6Jt7L9pvQcv29fh3nw19bt w9gr3KPGW/D2CVvuS/Ka77eurz/ShsVHr5q3R6fgPWtKhHvp0OXvOS KG/5BMpbvhGUx3wL5ROwAlgWOMfPewLi/gP48/Dkxc bt6y85uut1/tv4iH2h8EJzpuXrLzlLpS3fO0Nqn28a dNDjM2BgeMMQoQmCfEafImy2yUlpljwx7WyURJcL3ymAeimcVchtIysGHfn4kCOYiMHz3HTI2lWPvfZeblrv1TJuf21FLxVLvRz/LevGYNZftDP/I eYCZO02t XkXTS/hmM 4ikdar96Gd5b95yayi7l86h4ihmxn0Ox Utt9dbecsmtOXhFlrHZ34Rou5yQeLxMBnn LXyls/4 TYe4c1iAtN0zyYGCYeDFFbs/WnlLZ 0f3MsJzfaww7CYcLlDGaCjrzlAu5mvHnLkTeLzjCqZxXNv0 v49tr 9c7b7mXVh7z5bSP3ShdyqE8ZhERuSpKl qT8phFRGTQ1GMWERG5Yt16zJr566Y6nGRtNeD8Nvk4NZbOOimJ3HzVPIlotwt9LvYnTSLSoh6ziIjIFdM5ZhERkWtCDbOIiIiPqG EWERHxETXMDj/nMYM9wcfadv8zzpx A8pjvskuPa94wHnM511eec7nXLPynC Ursr28GMes vR87NlLfdDecw332XmFfshj/m8yyvP ZxrVp7zhbobMgyGgdpukR2mMZ6OAnUqW31EW3l UhFum1LulNFxt5VpQjAI5TIQhiTY8xaGcWf txtNewr1kdmttqkwt9cMPv2oMztb59OnUefeo7GP9uOcGyN1Rqjx0k2fauYxn5xG5eYxvwyMsaaG2R/c914wSLhcpkCYZBJWnNeP 1Om1rSAR7945hMmmXKQeDxAJuNOzHj0vWs/zi0HCbJI2p2OsZnHfPL0jG4ec3p i0Rnw9z5s6xg/Eqneux2fNxaOBymUHCPz9Fj606B6U472lzPRXw ltxlOLKPvfbPeVDb8Q0nk22rd/ 2wbh3CtLwkajK1vxJ7bVux6 f7fvavUlC84FLax 7ubO5VaFO3c6brNt5k7VT5U3GCRK08yYn7LzJsPKY 5OL241y0nIaZewwi3gFdyzw/swmsViRV7P1I4vPvCwyOzLMp0 wFCsSixWJvaqxt9oaij7cDrE3uWXXYkWWRobbf9t8OAwjw6w1h7FDbHtCM9w8Zs2N7TPue895/VhJWHEmy8/FK2yU3IelsSyLXDx4ZBWRtEU8WCaTcSfZt7Byi6xHW0PR1XzCzvN16slAuf23zfvfIfC9GQjfeSrIzWM aSQq/9ZOX3LXn1tcv9Khzm7HZzySJhcPUii0jk8uXuGd8wTdumtu2cJKhr0ruIDPx4XW38ayWFyPNgNDeu2fN93KaoYotMdURtL2PpczU aLri/bjkjRfP808Z3cfkrDi ft0O379bN/Xfu4xqPZRecyDFozDHHZDHF440yqmljwThdzfw5gN8a9v8OgR3J/5ykh2nuwn9wE1ljy9Y UxX3PBuB1Y4Lx 5oDTnin15gEzHuFNPMFqCebmYDzyKwEz2gxIsHtMrR7tufKYq3nWy2XKHSELEKAEfQyNKs 56/4pz/n8lMcsZ1PnQdeIxgOexw5wI5X5Nk12bZLYS8/QtfKYbzHn2/yJOjKHSynMRL59uPmseczjEwSC8daw Kkpz1mugPKY5fSG VScbLunslfn8SP7/9tr7UPTAIy0XlnKY77tymTetg8db60HWHC6YPnEMb9SCLRa8vPlMc xEMhc 88L5Tlf0vZ9QHnMt1HUGcBLTcACUFiBh05O54oJ1g4fs0/50lzAHZL2znNdZ2pklGw20HzUyOwWL5u3hvm0atAcyabGUuygbTeUx3wNeS4sMVMTWM7rJ/EwxxtwMn87z l15u0CBAkH1j2Zwc6wZvNWmUzbUHOYpNU SHyePOa5ZYv9hOkZKvfuX6 84F6U56w857NTHrMPXNc85u21EBib6uHKmeQTCXijizVFrprmyu7Tdctjtn8GZfeIs2uTvRcQ8bB/BmP3iDXpg4h/qMcsIiJyxdRjFhERuSbUMIuIiPiIGmYREREfUcMsIiLiI2qYRUREfEQNs4iISDf3JgkZ01xVGr3ymEVERLr5ucfm0QkRL83Z85j7 zIMFmAwZBOxZwKnt7sLTp4zWKxQ391RXXXXVVVfdl3VvDaBe6T0VZ9M58pjvbm5VCM2P2nmT2HmT9X7yJptxVhk7D5ZUc7LuiXwr Nm4yZDBa26K49xMYY9o4elBUV1111VVX3W/1vc0izRy sWlC/edXeNrIdSfBzc5jDjh5zJkui96x8yZrjM4bGPOj1LaK7Bx0WaKTmwcLzTzYpnuTjFLxfMM4YGe3prrqqquuuur rl E8Qjp3CLrURPTifBc7iMo3L74qzNv8jLV7V656qqrrrrqql r ll05jH34dx5zF393KPGKN7VjT0OMKy66qqrrrrqfq5fgKvPY 4jD3bZstjbrRGaN2imBddqeAcLVFddddVVV92P9fO4ZnnMY0yH7rGzuae66qqrrrrq16J bzLEU3b7vyq7h27pUlfaMI9NGzwddW54rnxTXXXVVVdddX/Vf9pXaXPyMufhm4ZZRERElMcsIiJybahhFhER8RE1zCIiIj6ihllERMRH1DCLiIj4iBpmERERH7kDMBm6ugBoEREROdnQz0aj0Tk 3aG23PWHKz3mZqquuuuqqq 63 v/99/ LaKZsZzHPQSllslKAYDxHOjLee4KRydA0Pzd3OC7t0c2r3OyRZ6m66qqrrrrqqrfq1XyC1Yl0K qxlCKx/6pnw9z9HPOg8zBVV1111VVX/TrWz H0F38NOg9TddVVV1111a9jvU9OwzzMPTeTcmwaw3AuBht0HqbqqquuuuqqX8e6o7Lv5C9X8yRWCvTjLsDe1zpGM5Oyxm6xdb550H mYqquuuuqqq34d6 PzixCNYmYAgsTjYTKXk8fs37xM1VVXXXXVVfdvveXCYh/9l5epuuqqq6666v6vd1Ies4iIiI8oj1lEROSauDvoHRC5rrp84b0YjR4bGLIueQe6swa7eZEbSw2ziJ d1Pj2arRF5NrSULaIiIiPqGEWERHxETXMIj4Xe5 l0XD fd5u3r QWmu/f2Gbz8c8TkSuFzXMIhdoIRWi0ZgmdkHri73P8htLDA3FGBqK8ayw12x0N5Zf8iw9wu vYww9mYGNGf7rd D3Jfv2uY3xvmHwOXWv90NF5MLcCRkGhmEwPQb2PNkGhhFqm/9TRHpYmORzw CPcI2hoR2yF7Tavz ZZejFo btjeWXvP786djHpj47jbjn8edzwIuhIoXwPI1GiNTCBa1W5Dao5kmYJqZpkioBpRSmaWKaCfLV7ove2dyqUKdOvU4zGaO2u0kzyU pEukp9Nmj8MUrhWZGhJ72n4juVQuDIXdl/THXc8433jSzhwqsLbJRblp8UGXpWI/yHQePz5IWvX RGGo QzsUJEuThBDDxkCAQTqaJjHdf9A4/99jcqjE6b2DMj1LbKrJz0H0hEXGHrQ3ChS2GhjZZ3hjMfvzy2wd4HaMQXuVz6vByNrKxx5OhIs8KozQ0vC3Sn/EI6dwi61ETM7rOYs5iea73YvY55uFhJ6pqmOHOzCoROdbG8iZDzlDvpTVU4cqRu2J/ 9J2 /fXMV5kYflJjEL4Xxd2frvTQirkDNUXebKsITWRvux/pwxAme/7/S1y595kCOMp7BaLFIu78NQgpBPMIn1bfnJ552H/6/MnGu /NW8vpNb47cnsyfvyX/Cb5/EXwnv /KKH6kVusGo gbkCScvCspKwYpLodYIZuDMfGAZGGRsDxsYYBYYD82qcRU7hss7DZl/EeM2H5s i/ghPNq 4Xkit8UfiB7/85vl5VPYxv//y4YJ LmVflX1p589FbrBqPkE0UwYKbJSA0gYFoJyJ9myclS4lckZXMld2tyk5NVe2yLWldCkREZFrQg2ziIiIjyhdSsTPlCIlcuuoYRY5 o0s/x1rssQGd4xW5kTSULSIi4iNqmEVERHxEDbOIiIiPqGEWERG5TNU8CTNFqc H6 IvERGRyzQeIX2aizUbP382DhqNRqNx0NjZsf/XaBw0diyrYTn/4kEaYP8LJ5ONMDQIxlVXXXXVVVdd9RPq3hrQCMZzzeW89x/597PRaBzsWA1r56DZIG9 /Wnf56y4tbLjd0p11VVXXXXVVW vt/1LhvtumO9Qr7Tyl2sHtEUxV/OsEyfdTHWeYzkZVl111VVXXXXVu9XP4fQXf008JKi66qqrrrrqqp u3qfuDfN4hEXW8SZUlVYzTuiz6qqrrrrqqqt bP0c7g4PBzCmf1I8AEafEpqsswuMPjXgoEjkzSKJqEnGXSIcxttZV1111VVXXXXVj9bP6gx5zCVSiX2W0xHVVVddddVVV72PejWf 4C1vmueku Uxn6phLqVMVgrOjWAcq2Pjqquuuuqqq656HCs9Qcpcwb2rc5kLa5hFRETk/Lo1zJqSU0RExEeG4Dw9ZoW4i4iIXCT1mEVERHxEDbOIiIiPqGEWERHxETXMIiIiPqKGWURExEf fxzcYvyqOPt7AAAAAElFTkSuQmCC
nu stiu care îti trebuie ...
armv7-a_neon
Te rog testeaza daca-l poti compila,incerc si eu si revin.
Salut,da,e ok functioneaza. Eu primesc o eroare la compilare,ai PM.
Android 7.1 (API level 25) (https://developer.android.com/studio/releases/platforms#7.1) · Android 6.0 (API level 23) (https://developer.android.com/studio/releases/platforms#6.0) · Android 4.4 (API level 19) (https://developer.android.com/studio/releases/platforms#4.4)
S-ar putea sa conteze ! dar nu este o regula ... A4 ( Android 5.x) A5( Android 7.x)
Conteaza! OSEbuild-urile de pe net nu au mai fost actualizate.
Ce a functionat pana acum cateva luni,nu mai functioneaza. Eu recunosc,nu ma pricep,luam de-a gata.Pana la modificarea unui OSEbuild.sh functional,asta e.
Ca idee:
https://i.postimg.cc/gJcTVnMG/Screenshot-from-2022-11-13-15-50-29.png (https://postimages.org/)
Android 7.1 (API level 25) (https://developer.android.com/studio/releases/platforms#7.1) · Android 6.0 (API level 23) (https://developer.android.com/studio/releases/platforms#6.0) · Android 4.4 (API level 19) (https://developer.android.com/studio/releases/platforms#4.4)
S-ar putea sa conteze ! dar nu este o regula ... A4 ( Android 5.x) A5( Android 7.x)
O mie de ani!!! Da,a contat,foarte mult.Daca nu am zapacit pc-ul cu reinstalari de versiuni S.O. Linux de iesea fum. Cand colo...Android 7.1 (API level 25 (https://developer.android.com/studio/releases/platforms#7.1) asta e,bine ca exista si salvatori :clap: inca odata,multumesc.
Am gresit captura,a doua e cea veche cu eroare.
https://i.postimg.cc/RJ64nvG2/aici.png (https://postimg.cc/RJ64nvG2)
https://i.postimg.cc/DJRcncNL/Screenshot-from-2022-11-13-15-50-29.png (https://postimg.cc/DJRcncNL)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.