Oscam si Cryptoworks

[popamare]

Am urmatoarea configuratie

Hw:

Vu+ Solo2 in care ruleaza 5 carduri:
Internal
- sci0 TvrHD
- sci1 HD+
Smargo (3 bucati pe un hub usb fara alimentare separata) :
- usb0 Zu tv (smartreader+)
- usb1 Focus (smartreader+)
- usb2 Playboy 15w (smargo crystal / phoenix)

E ok cu CCcam 230 cu 2 exceptii, anume: (1) cardul HD+ (caid 1843) se blocheaza la o anumita perioada cateva secunde (cand se reseteaza si handled ecm de la entitlements info din cccaminfophp), si (2) nu e citit cardul conax care deschide ZuTv.

Dupa mai multe teste si (din cand in cand) cu ajutorul si sfatul unor domni binevoitori, am reusit sa fac oscam sa mearga fara sa mai fie devalizate cardurile din hops ("group" face minuni :) ), cu 2 exceptii:
- (1) cardul care deschide Playboy de pe 15w e citit in toate readerele, dar nu deschide canalul cu pricina (e deschis din hop), in cccam mergand perfect si
- (2) cardul HD+ nu merge decat in readerul intern al receptorului ceea ce nu e un capat de tara, cu toate ca am un ecm mai mare...

Intrebarea e : cum pot sa fac sa mearga si cardul care deschide Playboy in oscam?



[reader]
label = focus
description = Focussat
protocol = smargo
device = /dev/ttyUSB1
caid = 0B02
detect = cd
mhz = 534
cardmhz = 600
ident = 0B02:000000
group = 1
dropbadcws = 1
audisabled = 1
[reader]
label = hd+
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 1843
boxkey = secret
rsakey = secret
detect = cd
mhz = 368
cardmhz = 368
group = 1
dropbadcws = 1
audisabled = 1
[reader]
label = tvrhd
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0500
detect = cd
mhz = 500
ident = 0500:FFF720,025900,025910
group = 1
dropbadcws = 1
audisabled = 1
[reader]
label = playboy
protocol = mouse
device = /dev/ttyUSB2
autospeed = 0
caid = 0D04
detect = cd
mhz = 357
cardmhz = 357
ident = 0D04:000000
group = 1
dropbadcws = 1
audisabled = 1
[reader]
label = hd+2
protocol = smargo
device = /dev/ttyUSB0
autospeed = 0
caid = 0B00
detect = cd
mhz = 357
cardmhz = 357
ident = 0B00:000000
group = 1
dropbadcws = 1
audisabled = 1





conf


[global]
logfile = /media/usb/oscam/oscam.log
clienttimeout = 2600
fallbacktimeout = 2200
bindwait = 80
nice = -1
maxlogsize = 3700
waitforcards_extra_delay = 450
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
usrfile = /media/usb/oscam
mailfile = /media/usb/oscam
cwlogdir = /media/usb/oscam
emmlogdir = /media/usb/oscam
lb_mode = 1
lb_save = 500
lb_min_ecmcount = 3
lb_max_ecmcount = 50
lb_retrylimit = 400
lb_max_readers = 20
lb_savepath = /media/usb/oscam/stats
lb_nbest_percaid = 01:1
ecmfmt = c/l
failbantime = 360
failbancount = 7
suppresscmd08 = 1









focus (http://sateliti.info/readerconfig.html?label=focus)
OFF
127.0.0.1
0
smargo
0B02:78BE

151 (http://sateliti.info/readerstats.html?label=focus&hide=4)
12.06.14
16:16:25
CARDOK
(2 entitlements)0B02:000000
exp:2014/06/30

0B02:000000
exp:2014/06/30 (http://sateliti.info/entitlements.html?label=focus&hideexpired=1)


http://sateliti.info/image?i=ICHID (http://sateliti.info/status.html?hide=0x77202868)
http://sateliti.info/image?i=ICRES (http://sateliti.info/status.html?action=restart&label=hd%2b)
hd+ (http://sateliti.info/readerconfig.html?label=hd%2b)
OFF
127.0.0.1
0
internal
0000:0000

657 (http://sateliti.info/readerstats.html?label=hd%2b&hide=4)
12.06.14
16:16:25
CARDOK
(1 entitlement)1843:008011
exp:2014/09/16 (http://sateliti.info/entitlements.html?label=hd%2b&hideexpired=1)


http://sateliti.info/image?i=ICHID (http://sateliti.info/status.html?hide=0x7701abf8)
http://sateliti.info/image?i=ICRES (http://sateliti.info/status.html?action=restart&label=tvrhd)
tvrhd (http://sateliti.info/readerconfig.html?label=tvrhd)
OFF
127.0.0.1
0
internal
0000:0000

108 (http://sateliti.info/readerstats.html?label=tvrhd&hide=4)
12.06.14
16:16:25
CARDOK
(1 entitlement)0500:025900
exp:2014/10/22 (http://sateliti.info/entitlements.html?label=tvrhd&hideexpired=1)


http://sateliti.info/image?i=ICHID (http://sateliti.info/status.html?hide=0x7701ca08)
http://sateliti.info/image?i=ICRES (http://sateliti.info/status.html?action=restart&label=playboy)
playboy (http://sateliti.info/readerconfig.html?label=playboy)
OFF
127.0.0.1
0
mouse
0D04:05DD

no data (http://sateliti.info/readerstats.html?label=playboy&hide=4)
12.06.14
16:16:25
CARDOK
(1 entitlement)0D04:000004
exp:2014/08/05 (http://sateliti.info/entitlements.html?label=playboy&hideexpired=1)


http://sateliti.info/image?i=ICHID (http://sateliti.info/status.html?hide=0x7701e818)
http://sateliti.info/image?i=ICRES (http://sateliti.info/status.html?action=restart&label=hd%2b2)
hd+2 (http://sateliti.info/readerconfig.html?label=hd%2b2)
OFF
127.0.0.1
0
smargo
0B00:03F2

111 (http://sateliti.info/readerstats.html?label=hd%2b2&hide=4)
12.06.14
16:16:25
CARDOK
(1 entitlement)0B00:000000
exp:2014/06/30 (http://sateliti.info/entitlements.html?label=hd%2b2&hideexpired=1)

[zildan]

Intrebarea e : cum pot sa fac sa mearga si cardul care deschide Playboy in oscam?
Daca il lasi fara linii deschide ceva?

[piccolo08]

Popamare am vazut o tampenie in setarile tale.
Asa ca sa nu te superi dar sterge asta "
lb_nbest_percaid = 01:1"
Mai ai cate geva aiurea acolo cum ar fi asta:

fallbacktimeout = 2200 e cam exagerat cam de vreo 7 (sapte ori)

Asta doar ca o corectura le ce am vazut mai sus :)

[popamare]

ok, am modificat cum ai zis.

Mai e o problema.. De ce imi apare ca local cardul dintr-o linie N de la un amic?! Cum se face ca sa nu mai apara asa (momentan am pus linia in grup separat).

Cardul d04 nu merge nici singur in oscam. L-am pus in cccam intr-un dm500 de unde am dat linie c in oscam-ul din Vu. Deschide perfect. Doar cand e citit cu oscam nu vrea. Sa mai fie vreun key pe la mijloc?

[piccolo08]

Oscam pune in hop 0 orice linie N primita de la oricare din parteneri.
E un lucru absolut normal. Cat despre grupuri e indicat sa separi localele de restul si C la C N la N, s.a.m.d.
Tutisi sqa nu uiti ca imparteala in grupuri impune alocarea lor la userul final pentru ca altfel n se mai numeste schimb.

[Rely]

ok, am modificat cum ai zis.

Mai e o problema.. De ce imi apare ca local cardul dintr-o linie N de la un amic?! Cum se face ca sa nu mai apara asa (momentan am pus linia in grup separat).

Pune la linia N respectiva CCC Hop =1 si nu mai e nevoie sa te joci la setarile de grup.

[popamare]

am observat ca se pot aloca mai multe grupuri aceluiasi user. Ex: group = 1,2,3

Deci asta nu ar fi o problema.

[laleauaneagra]

Mai e o problema.. De ce imi apare ca local cardul dintr-o linie N de la un amic?! Cum se face ca sa nu mai apara asa (momentan am pus linia in grup separat). elimina IDENT,daca ai setat setarea de CAID si IDENT pe o linie N o face local

[piccolo08]

Oricum "sunt" in hop=0 !
Cu ident fara ident putin conteaza.
Conteaza ceea ce setezi in cccam ( a nu se confunda cu cccam versiuni standalone) din webif :)

[popamare]

Am umblat prin config, am facut modificarile, dar.... nu au fost ok in ce priveste cardul HD+. Deschidea haotic din hop, rareori din localul meu :)

Am facut copy / paste la configul postat de mine in postarea 1 si totul a revenit la normal. Imi pare rau ca nu am salvat configul incorect, dar, daca ma gandesc ca nu facusem alte modificari, e posibil ca sugestia lui @picollo sa fi creat problema ?!

---------- Post added at 19:46 ---------- Previous post was at 19:40 ----------

Apropo, pentru cei care nu stiu sa-si compileze un oscam, incepand cu svn9762, au fost rezolvate rezonabil problemele cu ecm mare pe focus, in sensul ca acum e un ecm de 0.170-0.180 destul de stabil fata de ce era la svn9760 de ex.

[laleauaneagra]

Oricum "sunt" in hop=0 !
Cu ident fara ident putin conteaza.
Conteaza ceea ce setezi in cccam ( a nu se confunda cu cccam versiuni standalone) din webif :)

pai daca setam in protocol cccam asa ca niste baieti cinstiti si pune CAID,IDENT la N va fi locala,adica apare ca si local

daca setam ca niste baieti buni in protocol cccam si pune doar CAID sau ma rog nimic,va fi in hop 0 e si normal ca doar si in 3C e tot in 0....dar nu va aparea local

in 3C pune 256
in oscam punem CAID SI IDENT...chiar daca avem setat protocolu cccam in diferite moduri

in ambele emulatoare daca nu pune 256 si IDENT va apare asa cum apare un N in hop 0 dar nu e vazut local....asa cum e logic si normal,doar ca in cazul meu daca dai cartile din alte recuri in serveru principal poti folosi metodele de mai sus....care nu prea are treaba cu ce setezi la cccam,acolo se smenuiesc alte porcari

[piccolo08]

@ laleaua
http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.conf#minimizecards
si tot pentru laleaua:
http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.conf#reshare_mode
cimenteaza-TE!

---------- Post added at 23:53 ---------- Previous post was at 23:47 ----------


Am umblat prin config, am facut modificarile, dar.... nu au fost ok in ce priveste cardul HD+. Deschidea haotic din hop, rareori din localul meu :)

Am facut copy / paste la configul postat de mine in postarea 1 si totul a revenit la normal. Imi pare rau ca nu am salvat configul incorect, dar, daca ma gandesc ca nu facusem alte modificari, e posibil ca sugestia lui @picollo sa fi creat problema ?!

Poftim aici si rezolvarea ta. Optiunea "2" dar folosita pe versiuni actualizate.

http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.conf#preferlocalcards

Sa nu dai click cumva sa afli explicatiiile parametrilor ca arde.
In rest ai setari incorecte in config. NU ma repet care sunt.

[popamare]

Am setat prefer local cards = 2, dar tot face probleme HD+. E in readerul intern de la Vu+ Solo2 si are timpi intre 0.670-0.690. Nu stiu de ce nu merge in smartreader sau phoenix (smargo crystal). Din cate imi amintesc cand aveam ubuntu mergea pe smartreader, nu si pe crystal. Poate ma ajuta cineva cu niste sfaturi, caci chiar se obtin timpi buni in smargo fata de readerul intern de la Vu.

Pe de alta parte, am reusit sa fac si cardul D04 sa mearga. Am pus versiunea 9769, am sters readerul, l-am setat din nou din webif si totul a fost ok (in prealabil am facut update la card cu scam si i-am scos un eventual pin cu un Powercam V5.0). Nu sunt sigur care a fost problema (vers. de oscam, pinul sau setarea din webif). Eu inclin sa cred ca faptul ca am setat readerul din webif a rezolvat problema.





# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9769

# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label = focus
description = Focussat
protocol = smargo
device = /dev/ttyUSB1
autospeed = 0
caid = 0B02
detect = cd
mhz = 600
cardmhz = 600
ident = 0B02:000000
group = 1
dropbadcws = 1
audisabled = 1

[reader]
label = hd+
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = xxx
rsakey = xxx
detect = cd
mhz = 500
group = 1
dropbadcws = 1

[reader]
label = tvrhd
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 500
ident = 0500:FFF720,025900,025910
group = 1
dropbadcws = 1

[reader]
label = zuzu
protocol = smargo
device = /dev/ttyUSB0
services = zutv
caid = 0B00
detect = cd
mhz = 534
cardmhz = 369
ident = 0B00:000000
group = 1
dropbadcws = 1

[reader]
label = Playboy
protocol = mouse
device = /dev/ttyUSB2
detect = cd
group = 1





Nu am pus nimic la caid sau ident si nici la mhz/cardmhz, lasand optiunea autospeed bifata

Una rezolvata, ramane de vazut cu smargo si HD+.......

[piccolo08]

Exista rezolvare si acolo numai ca trebuie setat manual :)

[popamare]

Tot nu merge





2014/06/21 07:22:38 76D08718 r SmargoHD [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/21 07:22:40 76D08718 r SmargoHD [smargo] T1 Resync command error, trying to reactivate!
2014/06/21 07:22:44 76D08718 r SmargoHD [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/06/21 07:22:44 76D08718 r SmargoHD [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/21 07:22:44 76D08718 r SmargoHD [smargo] Calculated work ETU is 9.33 us reader mhz = 343
2014/06/21 07:22:45 76D08718 r SmargoHD [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2014/06/21 07:22:46 76D08718 r SmargoHD [smargo] Warning: Card returned error on setting ifsd value to 160
2014/06/21 07:22:48 76D08718 r SmargoHD [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/21 07:22:50 76D08718 r SmargoHD [smargo] T1 Resync command error, trying to reactivate!
2014/06/21 07:22:54 76D08718 r SmargoHD [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/06/21 07:22:54 76D08718 r SmargoHD [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/21 07:22:54 76D08718 r SmargoHD [smargo] Calculated work ETU is 9.33 us reader mhz = 343
2014/06/21 07:22:54 76D08718 r SmargoHD [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2014/06/21 07:22:56 76D08718 r SmargoHD [smargo] Warning: Card returned error on setting ifsd value to 160
2014/06/21 07:22:56 76D08718 r SmargoHD [smargo] card system not supported
2014/06/21 07:22:56 76D08718 r SmargoHD [smargo] Normal mode failed, reverting to Deprecated Mode
2014/06/21 07:23:00 76D08718 r SmargoHD [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/06/21 07:23:00 76D08718 r SmargoHD [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/21 07:23:00 76D08718 r SmargoHD [smargo] Calculated work ETU is 108.45 us reader mhz = 343
2014/06/21 07:23:01 76D08718 r SmargoHD [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2014/06/21 07:23:03 76D08718 r SmargoHD [smargo] Warning: Card returned error on setting ifsd value to 160
2014/06/21 07:23:04 76D08718 r SmargoHD [smargo] detect native nagra card
2014/06/21 07:23:07 76D08718 r SmargoHD [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/21 07:23:09 76D08718 r SmargoHD [smargo] T1 Resync command error, trying to reactivate!
2014/06/21 07:23:14 76D08718 r SmargoHD [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/06/21 07:23:14 76D08718 r SmargoHD [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/21 07:23:14 76D08718 r SmargoHD [smargo] Calculated work ETU is 9.33 us reader mhz = 343
2014/06/21 07:23:14 76D08718 r SmargoHD [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2014/06/21 07:23:16 76D08718 r SmargoHD [smargo] Warning: Card returned error on setting ifsd value to 160
2014/06/21 07:23:17 76D08718 r SmargoHD [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/06/21 07:23:19 76D08718 r SmargoHD [smargo] T1 Resync command error, trying to reactivate!
2014/06/21 07:23:24 76D08718 r SmargoHD [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/06/21 07:23:24 76D08718 r SmargoHD [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/06/21 07:23:24 76D08718 r SmargoHD [smargo] Calculated work ETU is 9.33 us reader mhz = 343
2014/06/21 07:23:24 76D08718 r SmargoHD [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.43 MHz (specified in reader->mhz)
2014/06/21 07:23:26 76D08718 r SmargoHD [smargo] Warning: Card returned error on setting ifsd value to 160
2014/06/21 07:23:26 76D08718 r SmargoHD [smargo] card system not supported
2014/06/21 07:23:26 76D08718 r SmargoHD [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/21 07:23:26 76D08718 r SmargoHD [smargo] card initializing error

[piccolo08]

Mai incearca :)
Gresesti si se vede din pom :)
Daca ai avea putina rabdare si ai mai da click pe cate vreun link ai sa iti dai seama si singur ca gresesti.

[zildan]

Spune-i ce ai observat si atat, te rog.

[popamare]

he he
Ma intreb ce rost avea sa deschid threadul asta. O las balta, si-asa n-am prea mult timp la dispozitie si oricum cardul expira in septembrie.

Oricum si eu astept sa-mi zica maestrul @picollo unde gresesc, daca are cu adevarat rezolvare la problema..


Citeste atent, foloseste "lsusb" sau usb buton la readers oscam.
Acolo incurci ceva!

Daca nu te descurci, creaaza configul de la zero, introdu manual parametru cu parametru de la webif si nu copia ce e gresit in configul tau.

Am fost in situatia ta de recent cu un hd+ si sky it nu voiau sa convetuiasca pe acelasi sitem :) sky singur functiona hd+ nici singur nici cu sky.
Am schimbat versiunea de oscam cu una mai noua si am reintrodus cu calm parametrii unul cate unul apoi am bifat valoarea pe automatic si valoarea de sub ea functie de sistemul in care introduci cardul ( dream, smargo...).
Incearca sa nu ei la misto.
Solutii sunt, oscam cere putin efort pentru a intelege mai tarziu ce ai de facut cand schimbi versiunea ( daca va fi cazul)
Daca iti dau eu solutia nu rezolvi absolut nimic si nici nu vei intelege absolut nimic.
De fapt solutia ti-am dat-o :)