PDA

View Full Version : How to set up a Mount for Direct Recording



me1960
29-12-08, 19:04
How to set up a Mount for Direct Recording


This guide will outline how to setup mounts for direct recording.
We will assume that the dreambox is setup and you are able to connect *** FTP/Telnet and can access the web interface.
Whether we are mounting to a PC or a NAS, we will need a shared folder to record to. For these examples we will use Recordings.
To Shaare the folder…
Right click the folder and select Sharing and Security
Check the box that says Shaare this folder on a network
Check the box that says Allow network users to change my files
The Shaare name: should be the same as the name of the folder
Enable File and Printer Sharing on the PC hosting the shared folder.
Open the Control Panel and select Network Connections
Right click the network card and select properties
Check the box next to File and Printer Sharing for Microsoft Networks
Select OK and close Control Panel
Direct Recording to a PC
Using the remote select MENU > SETUP > EXPERT SETUP > COMMUNICATION SETUP > MOUNTS
IP: <ip.address.of.pc>
Select CIFS form the pulldown menu on the right hand side
Dir: <name of shared folder on pc><press yellow for capital letters>
LocalDir: /hdd/movie
Options: rw,soft,udp,nolock
Extra: nolock,rsize=8192,wsize=8192
User: <account on pc>
Password: <password on account, if no password leave blank>
Select Automount
Select Mount
http://www.imagehosting.com/out.php/i172188_mount2.JPG (http://www.imagehosting.com/out.php/i172188_mount2.JPG)
A message should appear saying CIFS mount OK!
Save settings and exit from all the menus.
To start direct recording, select Start Direct Recording from the Blue Button menu.
This may vary depending on what image you are using.
To stop direct recording, select Stop Direct Recording from the Blue Button menu.
Check your shared folder on the PC and hopefully you should have a recording.
Direct Recording to a NAS Drive
Open your browser and enter the ip address of your dreambox into the address bar. This should bring up the web interface. To mount to a Samba Shaare we have to use the web interface and not the remote menus.
Select CONFIG > MOUNT MANAGER > ADD
Fill in the settings to match your network
http://www.imagehosting.com/out.php/i1712274_mountwebif.JPG (http://www.imagehosting.com/out.php/i1712274_mountwebif.JPG)
The User Name: will be the admin account on the NAS…usually admin.
The Password: will be the admin password on the NAS…usually admin.
(I would advise changing this in the NAS web interface to something other than admin)
If you have given the Recordings folder a password of it’s own, you will need to use this in the mount settings.
Select Save.
Click Mount and if all is correct a GREEN tick should appear. This can take about 10 seconds to mount.
To start direct recording, select Start Direct Recording from the Blue Button menu.
This may vary depending on what image you are using.
To stop direct recording, select Stop Direct Recording from the Blue Button menu.
Check your shared folder on the NAS and hopefully you should have a recording.
To Playback Your Recording
Using the remote select MENU > FILE MODE >RECORDED MOVIES
A list of your recordings should come up.
Highlight the recording and press OK to start.
Good Luck!



lb romana ( google translate ) :

Acest ghid va prezenta modul de instalare se montează direct pentru inregistrare.
Noi vom presupune că este de dreambox setup şi veţi putea să vă conectaţi *** FTP / Telnet şi posibilitatea de a accesa interfaţa web.
Fie că ne sunt de montare la un PC sau un SNC, vom avea nevoie de un folder partajat pentru a inregistra la. Pentru aceste exemple vom folosi Inregistrări.
Pentru a Shaare folderul ...
Faceţi clic dreapta pe folder şi selectaţi Partajare şi securitate
Bifaţi caseta de Shaare care spune că acest folder de pe o reţea
Bifaţi caseta de Permiteţi care spune că utilizatorii de reţea pentru a modifica fişierele mele
Shaare de nume: ar trebui să fie acelaşi cu numele folderului
Activaţi fişiere şi imprimante de pe PC-ul de hosting folderul partajat.
Deschideţi Panoul de control şi selectaţi Conexiuni in reţea
Faceţi clic dreapta pe placă de reţea şi selectaţi Proprietăţi
Bifaţi caseta de langă Partajare fişiere şi imprimante pentru Microsoft Networks
Selectaţi OK şi inchideţi Control Panel
Inregistrarea direct la un PC
Utilizarea la distanţă, selectaţi Meniu> SETUP> EXPERT SETUP> COMUNICARE SETUP> mounts
IP: <ip.address.of.pc>
Selectaţi CIFS forma meniul derulant din partea dreaptă
Dir: <name de folder partajat de pe pc> <press galben de capital pentru letters>
LocalDir: / HDD / film
Opţiuni: rw, moale, UDP, nolock
Extra: nolock, rsize = 8192, wsize = 8192
Utilizator: <account pe pc>
Parola: <password pe account, dacă nu plec blank> parola
Selectaţi Automount
Selectaţi Mount

Un mesaj ar trebui să apară spune CIFS de montare OK!
Salvaţi setările şi ieşire din toate meniurile.
Pentru a incepe inregistrarea directă, selectaţi Start Direct de inregistrare de la Blue Buton meniu.
Aceasta poate varia in funcţie de ceea ce a imaginii pe care o utilizaţi.
Pentru a opri inregistrarea directă, selectaţi Stop Direct de inregistrare de la Blue Buton meniu.
Uitaţi-vă in folder partajat de pe PC-ul şi, sperăm, ar trebui să aveţi o inregistrare.
Inregistrarea direct la un SNC Drive
Deschideţi browser-ul dvs. şi introduceţi adresa IP a dreambox in bara de adrese. Aceasta ar trebui să aducă pană la interfaţa web. Pentru a monta la un Samba Shaare avem de a folosi interfaţa web şi nu la distanţă meniuri.
Selectaţi config> mount manager> adăugaţi
Completaţi setările de reţea pentru a se potrivi

Numele de utilizator: va fi de cont de administrator pe SNC ... de obicei, admin.
Cele Parola: va fi de parola de administrator pe SNC ... de obicei, admin.
(Aş sfătui in această schimbare a SNC interfaţa web pentru a ceva, altele decat admin)
Dacă aţi dat de o parola Inregistrari folderul de e proprii, va trebui să utilizaţi această in setările de montare.
Selectaţi Salvare.
Faceţi clic pe muntele şi dacă este corect toate verde, bifaţi ar trebui să apară. Aceasta poate dura aproximativ 10 de secunde pentru a monta.
Pentru a incepe inregistrarea directă, selectaţi Start Direct de inregistrare de la Blue Buton meniu.
Aceasta poate varia in funcţie de ceea ce a imaginii pe care o utilizaţi.
Pentru a opri inregistrarea directă, selectaţi Stop Direct de inregistrare de la Blue Buton meniu.
Uitaţi-vă in folder partajat de pe SNC şi, sperăm, ar trebui să aveţi o inregistrare.
Pentru a vă de redare de inregistrare
Utilizarea la distanţă, selectaţi Meniu> FILE MODE> inregistrate filme
O lista dvs. de inregistrări ar trebui să vină.
Evidenţiaţi şi de inregistrare şi apăsaţi OK pentru a incepe.
Succes!