PDA

View Full Version : E1 Remote All



me1960
03-04-09, 18:14
The main remote controls we use today (there are others)



http://www.pli-images.org/images/wiki/000847_dm_rcu.jpghttp://www.pli-images.org/images/wiki/000005_RC500-32.png

What difference do you see between these two remote?




The difference in size
The one of the left is for the DM600, DM7000, DM7020, DM7025, DM800
The one of the right is for the DM500plus, DM56xx and the DM500 click here for more details (http://www.pli-images.org/modules/wiki/index.php?wakka=DM500Remote)
The features and functions on the remote controls are different
The remote on the left has a video or record button the DM500 does not
The remote on the left as a different volume buttons to the DM500
The remote on the left has bouquets buttons the DM500 does not



Daily use

Changing Channels


DM500 (the remote on the right above)
Use the up and down arrows keys to change the channel or press the OK button twice to see the channel list
All other models (the remote on the left above)
Use the up and down arrows or the left and right arrows to change the channel


Selecting the Channels Lists


DM500 (the remote on the right above)
press the OK button twice to see the channel list
All other models (the remote on the left above)
Use the up and down arrows


Selecting bouquets


DM500 (the remote on the right above)
Press the OK button twice to see the channel list and then the BLUE button to select the bouquets
All other models (the remote on the left above)
Use the bouquets button to select the bouquet you require


Changing the Volume


DM500 (the remote on the right above)
Use the left and right arrows keys to change the volume
All other models (the remote on the left above)
Use the volume buttons to change the volume


Recording


DM500, DM56x0, DM500+ users see below
DM7025, DM800 - press the RED button
DM600, DM7000, DM7020 - press the VIDEO button


The Help button on all remote control units is your friend!
On the 7025 & 800 you have interactive help screens (not shown here)
Here is a list of the functions on your remote control.

http://www.pli-images.org/images/wiki/000847_button1.png

http://www.pli-images.org/images/wiki/000847_button2.png

Howto access the Video button with the small silver remote above prior to Jade2


The video menus give you access to the record button and several others as shown below.

1. From the TV screen press the OK button so you see the OSD popup like this example below

http://www.pli-images.org/images/wiki/000847_500record1.png

2. Now press the Help button and the screen above will change to be like this;

http://www.pli-images.org/images/wiki/000847_500record.png

3. To get more help press the help button again and these screen will provide you with all the commands

http://www.pli-images.org/images/wiki/000847_video_h1.png

http://www.pli-images.org/images/wiki/000847_video_h2.png


Tip: For this tip above to work you need to have the correct remote control unit defined in the Hardware setup section (http://www.pli-images.org/modules/wiki/index.php?wakka=E1HardwareRC)

me1960
03-04-09, 18:15
Howto access the Video button with the small silver remote with the Jade2 software


The video menus give you access to the record button and several others as shown below. But
before we can do this you have to select the remote control you have on your DM500. To do this
you have to ( The howto is here (http://www.pli-images.org/modules/wiki/index.php?wakka=E1HardwareRC) )

1. Press the menu | setup | hardware | remote control selections
2. select silver remote

http://www.pli-images.org/images/wiki/000847_500hardremote.jpg

3. Go to TV screen

4. From the TV screen press the OK button so you see the OSD popup like this example below

http://www.pli-images.org/images/wiki/000847_500record1.png

5. Now press the Help button and the screen above will change to be like this;

http://www.pli-images.org/images/wiki/000847_500record.png

6. To get more help press the help button again and these screen will provide you with all the commands

http://www.pli-images.org/images/wiki/000847_video_h1.png

http://www.pli-images.org/images/wiki/000847_video_h2.png

The VIDEO controls will NOT appear until you select the correct remote control (Silver)

WARNING: By making this selection of the silver remote your WEBIF remote may not work correctly

Tip: For this tip above to work you need to have the correct remote control unit defined in the Hardware setup section (http://www.pli-images.org/modules/wiki/index.php?wakka=E1HardwareRC)

http://www.pli-images.org/images/wiki/000847_button.jpg
Tip: press the RED button to see the Electronic Programme Guide (EPG)
Tip: To assign new functions to your Yellow and Blue buttons, learn more about it here (http://www.pli-images.org/modules/wiki/index.php?wakka=E1SystemKey)
Tip: The old blue button for softcams and downloads is still there but in a different layout click here to learn more (http://www.pli-images.org/modules/wiki/index.php?wakka=E1Setup)
Tip: The old PPanels menu is now under the "yellow" button click here to learn more (http://www.pli-images.org/modules/wiki/index.php?wakka=E1Plugins)
Tip: a DM500+, DM600, DM7000, DM7020 remote (http://www.pli-images.org/modules/wiki/index.php?wakka=E1HardwareRC) will now work on your DM500 ..


Accessing the remote control function from your desktop


By Riad (http://blogs.riad.hanna.name/?p=44)http://www.pli-images.org/themes/PLiTheme/images/external_link.gif

Using the Windows operation system, I needed to send remote control
codes/presses via the LAN to control the Dreambox:

1. Download WGET for Windows and place it in C:\ (google is your friend)
2. Lunch a command prompt window (CMD) and type:
C:\wget.exe –quiet –delete-after http://ipofyourdmbox/cgi-bin/rc?Xhttp://www.pli-images.org/themes/PLiTheme/images/external_link.gif
(where ipofyourdmbox might = 192.168.1.3)

By replacing X with the correct code number,
the wget command will send a remote control
key press/code to the Dreambox. The flag –quite will make the
command silent, and –delete-after will make wget not write any files to C:\

Here is a list of remote command codes:


116=Power
2=1
3=2
4=3
5=4
6=5
7=6
8=7
9=8
10=9
158=previous
11=0
159=next
115=volume up
113=mute
402=bouquet up
114=volume down
1=lame
403=bouquet down
358=info
103=up
141=dream
105=left
352=OK
106=right
392=audio
108=down
393=video
398=red
399=green
400=yellow
401=blue
385=tv
377=radio
66=text
138=help

The above method can be used in many situations, but the way I use it
is with IR Server Suite to control my Dreambox from a different room using Media Center PC.

http://www.pli-images.org/modules/wiki/index.php?wakka=E1RemoteAll