Kaon K-E2220CO DVB-C Usefull Info&Tools

Usefull Info Smile
---------------------------

[FP] CH.UPx3 + [RC]MUTE = Host Mode
[FP] CH.UPx3 + [RC]Yellow(TIMER) = Host Mode
[FP] CH.UPx3 + [RC]1 = Reset Factory Defaults
[FP] CH.UPx3 + [RC]2 = Secret Test Menu
[FP] CH.UPx3 + [RC]3 = Jump to Manual Search Menu
[FP] CH.UPx3 + [RC]4 = Secret Test Menu
[FP] CH.UPx3 + [RC]5 = Jump to System Settings Menu
[FP] CH.UPx3 + [RC]6 = Display Device Test (Color Test)
[FP] CH.UPx3 + [RC]PAUSE = CCCC (??Unknown??)



[FP] = Front Panel
[RC] = Remote Controler

Tested on KAON K-E2220CO DVB-C/T With CONAX Embeded

System Reset PIN = 0000 (Default)


Chipsets
==============
NEC Japan D61115GM
hynix (612P) HY5DU281622ETP-J
SPANSION GL032A90FFIS3
ST ST8004C (chipset for SmartCard Interface) (ST Microelectronics)
ST ST232C


Tuner Type :Digital (LG)


KAON K-E2220CO Main Specifications
===================================
Reciver Model: K-E2220CO
Reciver Type : Digital
Reciver Mode : DVB-C (Cable),DVB-T (Terrestrial)
Reciver Input: 1xCAS Slot
ANT IN,
RF IN,

Reciver Outputs: 1xVideo(CVBS),
2xAudio(RCA L+R),
1xS/PDIF,
1xTV Out(SCART),
Loop Out,
TV Out,
1x Comunication Port (RS-232)

Reciver S/W: v01.02.22
Reciver H/W: v3E.11.95
Reciver Loader: v1.1.3
Reciver Info: 10.05.22-D440
Memory Type: 4M Flash (Unknown Type)


RS-232 Spec
------------
Pin 2 = Tx
Pin 3 = Rx
Pin 5 = GND

Front Panel LCD Simbols
-------------------------
8.88 - Incorrect Firmware Version
---- - Stand-by Mode
Dn** - Download Firm
Up** - Upload Firm
End - Firmware Upgrade Complete
hoSt - Host Mode
CCCC - CCCC Mode (SoftCam Keys Upgrade)
tESt - Test Mode

[Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

la ce se foloseste kaonul asta din postul tau?

Kaon K-E2220CO DVB-C

@waynejames - este un receptor digital pentru cablu

Quote:

---

Originally Posted by GEXE [Only registered and activated users can see links. Click Here To Register...]

Kaon K-E2220CO DVB-C

@waynejames - este un receptor digital pentru cablu

---

am vazut in setari ceva despre terestru si faptul ca poti pune conax in el.
se poate folosi la vreun provider romanesc?

Quote:

---

Originally Posted by deleriumdj [Only registered and activated users can see links. Click Here To Register...]

[Only registered and activated users can see links. Click Here To Register...]

---

Link1: [Only registered and activated users can see links. Click Here To Register...]
Link2: [Only registered and activated users can see links. Click Here To Register...]

Quote:

---

Originally Posted by deleriumdj [Only registered and activated users can see links. Click Here To Register...]

Link1: [Only registered and activated users can see links. Click Here To Register...]
Link2: [Only registered and activated users can see links. Click Here To Register...]

---

[Only registered and activated users can see links. Click Here To Register...]

Am si eu unul si vreau sa-l folosesc la RDS pe cablu dar nu prinde nimic. La frecventele cu posturi digitale are semnal foarte bun dar nu gaseste nimic .

Incearca sa introduci manual frecventele pt ca asa am patit si eu la synaps csd 300-cx al meu

Si asa tot nu gaseste nimic ! Are cineva un firmwar pentru el?

Va rog frumos sa respectati regulamentul .... altfel va scot afara in frig :)

New! Kaon K-E2220CO Tool 1.4
=========================
[Only registered and activated users can see links. Click Here To Register...]


[Only registered and activated users can see links. Click Here To Register...]


Uploaded with [Only registered and activated users can see links. Click Here To Register...]

---------- Post added at 02:25 ---------- Previous post was at 02:18 ----------

Kaon K-E2220CO Firmware (H/W - 3E.11.95, S/W - 01.02.22)
=============================================

[Only registered and activated users can see links. Click Here To Register...]

Kaon K-E2220CO Firmware (H/W - 3E.11.95, S/W - 01.00.19)
=============================================

[Only registered and activated users can see links. Click Here To Register...]

si pana la urma cum se zapaceste acest aparat ca nu prea a m inteles/a m un prieten care are acest aparat si se chinuie l a el dar spune ca nu reuseste decat ceva erori personal nu stiu ce erori ai da i am trimis cred tot cei trebuie spune ca comunica cu pc ul dar ca nu se intampla nimic sa incarce softul a r trebui peste ceva zile sa ajunga pe la mime daca nu reuseste poate explica cineva pas cu pas ce trebuie facut mai exact ca sa incarce softul de pe pc pe rec va multumesc

a reusit cineva sa puna patch-ul pe el mie imi spune not implemented yet

a reusit cineva sau e posibil ca urtima versiune de soft akta sau nextgen sa nu permita comunicarea cu pc ul ceva gen f,,,s sat ksf100 a m dori si noi daca se poate pas cu pas metoda de upgrade caci personal a m tot dawnlodat versiuni de loader si soft si fara rezultat VA MULTUMESC