Pentru conectare la dream cu ajutorul hyperterminal e nevoie de cablu null modem.
Trebuie puse urmatoarele setari:
COM port 1 (sau 2)
- Bits per second = 115200
- Data bits = 8
- Parity = None
- Stop bits = 1
- Flow control = Xon / Xoff
La mine apare asa:
Dreambox DM500
loaded at: 00500000 0060116C
relocated to: 00400000 0050116C
board data at: 004FF124 004FF16C
relocated to: 00405194 004051DC
zimage at: 004058D1 004FE1BE
avail ram: 00502000 02000000
Linux/PPC load: console=null root=/dev/mtdblock5 rootfstype=squashfs ro
Uncompressing Linux...done.
Now booting the kernel
Si sta si nu mai face nimic.
---------- Post added at 12:18 ---------- Previous post was at 11:47 ----------
Am reusit sa dau comanda ( console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=ttyS0,115200 ) sa imi apara pe terminal ce se inampla cand booteaza:
Dreambox DM500
loaded at: 00500000 0060116C
relocated to: 00400000 0050116C
board data at: 004FF124 004FF16C
relocated to: 00405194 004051DC
zimage at: 004058D1 004FE1BE
avail ram: 00502000 02000000
Linux/PPC load: console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=
ttyS0,115200
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.6.9 (obe@vmlinux.obesoft.com) (gcc version 3.4.4) #26 Mon Dec 22
17:16:45 CET 2008
Built 1 zonelists
Kernel command line: console=null root=/dev/mtdblock5 rootfstype=squashfs ro con
sole=ttyS
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30080k available (1692k kernel code, 584k data, 80k init, 0k highmem)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_o
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 22) is a 16550A
loop: loaded (max 8 devices)
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0xc3060600:<4>eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card interrupt from stopped cardT DEV
eth0: interrupt from stopped card
et
eth0: interrupt f
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped car
eth0: interrupt from stopped card1 Enabled Applicnterrup
eth0: interrupt from stopped card
eth0: interrupt from stopped cardtLe IP: interrup
eth0: interrupt from stopped card stopped carde for S1 Booted ca
eth0: interrupt from stopped card
relocated
eth0: interrupt from stopped card
eth0: interrupt from sto
eth0: interrupt from stopped card
eth0: in
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
eth0: interrupt from stopped card
Si asta se repeta la nesfarsit. Unde-i buba?
---------- Post added at 13:50 ---------- Previous post was at 12:18 ----------
Acum alta problema (offf); incerc sa rescriu bootloaderul si se opreste (o data la 3%, apoi 10%, iar acum la 18%)
C:\jtag>JtagDm500 -m dm500 -e 00:09:34:264:34
Dreambox Dm500 board initialize
Flash info. : INTEL JS28F640J3D75
[dm500] reading CA:ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[CA] Ho Ho! CloneWARS corrupted bootloader eh?! consider getting a IPBOX!
Readed Config Area
Configuration Area
Mac Address: 00:09:34:aa:0b:cc
Redunderant Mac Address: aa:0b:cc
Tuner Type alps
Mac Address Change Requested
Commit Config Area
Configuration Area
Mac Address: 00:09:34:26:d4:34
Redunderant Mac Address: 26:d4:34
Tuner Type alps
Erase Flash. done
Download....... 18%