Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Dm600

  1. #1

    Default Dm600

    - 250 MHz PowerPC Processor (350 Mips)
    - Linux Operating System
    - 1 x Smartcard-Reader
    - MPEG2 Hardware decoding
    - Common available NIMs (DVB-S)
    - Tuner modules, Plug&Play
    - V.24/RS232 Interface
    - 10/100Mbit compatible Ethernet Interface
    - 2 LED status
    - 32 MByte Flash, 96 MByte Ram total
    - integrated IDE Interface
    - Support for internal HDD 2,5" in any capacity
    - unlimited channel lists for TV/Radio
    - channel-change time < 1 second
    - full automatic service scan
    - supports directly bouquet-lists
    - supports EPG (electronic program guide)
    - supports own videotext
    - supports multiple LNB-Switching control (DiSEqC)
    - fully adaptable OSD in many languages and skin-support
    - S/PDIF Interface for digital bit stream out (AC-3)
    - 1 x Scart-interfaces
    - S-Video connector
    - analoge modem
    DreamBox DM600 technical data
    Frequency Range 950 …. 2150 MHz
    Signal Level - 65 dBm …. - 25 dBm
    Signal-to-Noise Level 12 dB max.
    DBS-Tuner Input Connector F-Type female
    Input Impedance 75 Ohm
    AFC +/- 3 MHz
    Demodulation Shaped QPSK
    FEC Viterbi and Reed-Solomon
    Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
    Roll-off Factor 35 %
    Demultiplexing according ISO 13818-1
    Video decoder:
    Video Compression MPEG-2 and MPEG-1 compatible
    Video Standard PAL G/ 25 Hz
    Video Formats 4:3 / 16:9
    Letterbox for 4:3 TV-Device
    Audio decoder:
    Audiokompression MPEG-1 & MPEG-2 Layer I and II
    Audio Mode Dual (main/sub), Stereo
    Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Output analog:
    Output Level L/R 0,5 Vss on 600 Ohm
    THD > 60 dB (1 kHz)
    Crosstalk < -65 dB
    Output digital:
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Output optical (AC3)
    Video parameter:
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard
    Output: FBAS, RGB, S-Video
    Serielle Interface RS 232:
    Typ RS232 bidirectional
    Bitrate 115,2 kBit/s max.
    Plug Connector SUB-D-9
    Function: Update of Firmware
    10/100 MBit compatible interface
    Function: Update of Firmware
    IDE Interface:
    Intern for connect 2,5" HDD
    LNB Power and polarisation:
    LNB Current 500mA max. ; short-circuit-protected
    LNB Voltage vertical < 14V no load, > 11,5V at 400mA
    LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
    LNB shut-off at Standby-Mode
    Count of active satellite position:
    DiSEqC - Rotor Control
    Power consumption:
    < 15W / 12V
    Input voltage:
    DC12V +/- 15%
    Extern power supply:
    Input: 110-240V AC / 50-60Hz / 0,6A
    Output: 12V = / 2A
    Physical specification:
    Ambient Temperature +15°C...+35°C
    Humidity < 80%
    Size (W x D x H): 195 mm x 130 mm x 40 mm
    Weight: 0,6 kg

  2. #2

    Default Re: Dm600

    Formatarea HDD-ului cu Gemini 4.50:
    BP->Devices Manager->OK (pe respectivul device)->Init
    Atentie la mount, trebuie un unmount mai intai daca hard-ul este montat.Dupa formatare acesta are nevoie de inca un mount iar in BP->Extras/Setup->record sa fie setata locatia inregistrarilor,altfel da eroare de accesare a HDD in momentul in care se incearca o noua inregistrare.
    Nu stiu daca se respecta si pentru 4.60.
    Un mare minus ar fi faptul ca nu se poate folosi o interfata Phoenix pe el.Cand am timp revin si cu alte informatii legate de multi boot cu Barry Allen si scrierea de imagini,salvarea acestora,etc.
    Atentie la clone,din ce stiu Gemini 4.60 nu merge pe clone,pur si simplu nu booteaza.Nu va speriati,puneti o alta imagine si totul e OK.Acelasi lucru se poate intampla si cu alte imagini care contin Secondstage: „66“.

  3. #3
    Standard RSP member franta's Avatar
    Join Date
    24 Jun 2009

    Default dream

    am vazut la un site din germanaia hmsat pe la 260 de euro
    dar as vrea sa stiu daca are enigma 2 si daca sede canale hd
    un dreambox800 e cam 450 de euro
    de ce e diferenta asta , ce are in plus dream800.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts