card system not supported

[lao]

Nu reusesc sa pornesc un card nagra 1880 in oscam cu smargo. In acelasi oscam mai sunt niste carti, dintre care una in alt smargo identic cu acesta.

2011/12/02 18:38:13 59E0F0 h restarting reader gigel
2011/12/02 18:38:13 59E0F0 h creating thread for device /dev/ttyUSB0
2011/12/02 18:38:13 5A1450 r smargo init
2011/12/02 18:38:13 5A1450 r reader gigel initialized (device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=368)
2011/12/02 18:38:14 0 gigel card detected
2011/12/02 18:38:17 5A1450 r ATR: 3F FF.............................XX XX XX................................................. 30 28
2011/12/02 18:38:17 5A1450 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/12/02 18:38:19 5A1450 r detect native nagra card
2011/12/02 18:38:27 5A1450 r card system not supported
2011/12/02 18:38:27 5A1450 r Normal mode failed, reverting to Deprecated Mode
2011/12/02 18:38:33 5A1450 r ATR: 3F FF.............................XX XX XX................................................. 30 28
2011/12/02 18:38:33 5A1450 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/12/02 18:38:36 5A1450 r detect native nagra card
2011/12/02 18:38:44 5A1450 r card system not supported
2011/12/02 18:38:44 5A1450 r card initializing error

Smargo-ul e functional cu sbox. L-am setat auto, 3.69 si 6mhz, kernel normal si dreambox, T=0 si 1, nici nu mai stiu toate combinatiile incercate...
Am pus si cateva versiuni de oscam recente, rezultat null.

[reader]
label                         = gigel 
description                   = 
enable                        = 1
protocol                      = smargo
device                        = /dev/ttyUSB0
device_out_endpoint           = 0x 0
key                           = 
password                      = 
pincode                       = none
readnano                      = 
services                      = 
resetcycle                    = 0
smargopatch                   = 1
showcls                       = 10
fallback                      = 0
cacheex                       = 0
logport                       = 0
caid                          = 1880
boxid                         = 
fix9993                       = 0
rsakey                        = yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
ins7e                         = 
force_irdeto                  = 0
boxkey                        = xxxxxxxxxxxx
atr                           = 
ecmwhitelist                  = 
detect                        = cd
nagra_read                    = 0
mhz                           = 357
cardmhz                       = 357
ident                         = 1880:002011,002111,002113,000000
chid                          = 
class                         = 
aeskeys                       = 
showcls                       = 10
group                         = 3
emmcache                      = 0,0,0
lb_weight                     = 100
savenano                      = 
blocknano                     = 
ccchop                        = 0
deprecated                    = 0
audisabled                    = 0
cooldown                      = 0,0

In internal mergea mai demult, acum n-am mai incercat, dar e exclusa aceasta varianta deoarece are ecm prea mare. Iar alt cititor nu o sa iau deocamdata.
Poate trebuie setat intr-un anumit fel smargo... Ca am mai patit-o cu un card irdeto, pana nu mi-a spus un coleg exact cum sa-l setez, n-am reusit sa-l pornesc.

[fery21]

Vezi cat ai setat la smargo frecveta, sau e dus cardu

[lao]

Smargo-ul e functional cu sbox

Adica face lumina
Am inversat acum cele 2 smargo, si-mi deschide cardu via care era in celalalt. Deci daca are cineva 1880 in smargo/oscam pe E2, ca pe incercate ma apuca sarbatorile....
As incerca smartreader+ dar la Scan USB nu arata nimic si nici lsusb nu merge. Asa ca nu stiu ce sa pun la device

[dorinineu]

Cardul 1880 merge cel mai bine in sbox,merge si in oscam dar ,din cate imi amintesc doar cu versiuni mai vechi,vorbesc la nivelul anului trecut cand am setat unui prieten,in final a ramas pe sbox si merge si in ziua de azi.E drept ca la el e pe slot intern in dm800,dar la oscam versiunile noi de atunci am intalnit aceeasi eroare cu card system not supported.

[lao]

In sci merge cardul, si nu stiu daca e oscamul de vina... Am in el mai multe sisteme de codare si merg fara probleme, via, conax, nds, irdeto (acum l-am scos).
Chiar asa, doar nagra sa nu mearga?
PS Stiu ca merge foarte bine in sbox, dar vreau sa-l vad si in oscam.

[fery21]

Scuze eram pe phona nu am vazut... daca ai setat 3,69 pune la mhz = 368 e viacard? sau smargo original ?

Daca e vorba de un server nu ai libusb sau usb-tools daca nu raspunde la lsusb

[Diablo1]

Pune o versiune mai veche de Oscam sa vezi cum fuge cu tot cu smargo

[lao]

Am pus, am curatat toate optiunile pe care nu le stie

Warning: keyword 'mailfile' in global section not recognized
Warning: keyword 'emmlogdir' in global section not recognized
Warning: keyword 'disablemail' in global section not recognized
Warning: keyword 'loghistorysize' in global section not recognized
Warning: keyword 'failbantime' in global section not recognized
Warning: keyword 'failbancount' in global section not recognized
Warning: keyword 'suppresscmd08' in global section not recognized
Warning: keyword 'waitforcards_extra_delay' in global section not recognized
Warning: keyword 'dropdups' in global section not recognized
Warning: keyword 'cacheexwaittime' in global section not recognized
Warning: keyword 'lb_retrylimit' in global section not recognized
Warning: keyword 'lb_retrylimits' in global section not recognized
Warning: keyword 'lb_nbest_percaid' in global section not recognized
Warning: keyword 'lb_noproviderforcaid' in global section not recognized
Warning: keyword 'lb_savepath' in global section not recognized
Warning: keyword 'lb_stat_cleanup' in global section not recognized
Warning: keyword 'lb_use_locking' in global section not recognized
Warning: keyword 'lb_reopen_mode' in global section not recognized
Warning: keyword 'lb_max_readers' in global section not recognized
Warning: keyword 'lb_auto_betatunnel' in global section not recognized
Warning: keyword 'lb_auto_betatunnel_prefer_beta' in global section not recognized
Warning: keyword 'double_check' in global section not recognized
Warning: keyword 'httphelplang' in webif section not recognized
Warning: keyword 'httpcert' in webif section not recognized
Warning: keyword 'httpjscript' in webif section not recognized
Warning: keyword 'httpsavefullcfg' in webif section not recognized
Warning: keyword 'description' in reader section not recognized
WARNING: value 'smargo' in protocol-line not recognized, assuming MOUSE
Warning: keyword 'device_out_endpoint' in reader section not recognized
Configuration newcamd: Error in Key

apoi ramane o eroare pe care nu pot s-o scot

Configuration newcamd: Error in Key

si nu e nicio eroare acolo, am sters definitiv
[newcamd]
...........

si degeaba, tot asa zice

[fery21]

Te sfatuiesc sa faci setarile din webinfo

[lao]

Nu vrea nici cu versiuni vechi sau antice, astept pe cineva care are asa ceva functional
E2/smargo/oscam/1880
Alta configuratie nu-mi e de ajutor.
Smargo e original, nu clona.

PS Azi, surpriza, card system not supported la un nds mioritic pe un 800, dar dupa ce i-am dat un NDS1+Forced si un restart la oscam a luat-o

[sorin8m]

cardurile 1880 se stie ca sunt pacatoase, creaza probleme.
eu am pus la un sarb cu caid 1880 avea 2 cartele, una mergea din prima iar a doua sa o f...... ca nu vroia nici sa o omori.