nu trebuie neaparat 5020, din cate am inteles nu sunt recomandate versiune KGD.
pune o alta versiune de fw.bin( em am mers cu 4890) pe flash disk si opeste/reporneste-l din spate cu stickul in portul USB intrat.
am instalat noua versiune e2 de test. si am vrut sa revin la Firmware Official si in loc sa pun 0.9.5020 am pus 0.9.4466 si cred ca lam busit nu ma mai pot conecta cu nimic la box nici cu azup nu mai ia nici usb scrie booting si asa ramine
nu trebuie neaparat 5020, din cate am inteles nu sunt recomandate versiune KGD.
pune o alta versiune de fw.bin( em am mers cu 4890) pe flash disk si opeste/reporneste-l din spate cu stickul in portul USB intrat.
Last edited by qwess; 22-10-10 at 23:55.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
nimic mort booting apare si atit
incearca sa schimbi usb-ul, formatat fat32, redenumire in patch.bin si incearca cu o versiune 0.9.2372 sau mai veche.
Daca nu vrea, .....JTAG sau probleme DOM.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
am incercat toate vatiantele a mai ramas jtagu am mai resuscitat un strong cu el dar asta cred ca e mai complicat
vezi postul #12, iei legatura cu @radu67 daca nu te descurci.
bafta
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
merci mult man sper sal fac
---------- Post added 23-10-10 at 00:10 ---------- Previous post was 22-10-10 at 23:30 ----------
am inteles ca merge cu interfata max232 cu jtagu nu merge ?
Last edited by istvan; 23-10-10 at 07:29.
RSP-TEAM
project valerie
The aim of project valerie is to create an easy to use full feature media center for all enigma2 based set top boxes.
http://code.google.com/p/project-valerie/
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
am instalat noua versiune e2 de test. si am vrut sa revin la Firmware Official si in loc sa pun 0.9.5020 am pus 0.9.4466 si cred ca lam busit nu ma mai pot conecta cu nimic la box nici cu azup nu mai ia nici usb scrie booting si asa ramine Am construit o interfata Com TX RX am pornit putty Speed 115200 pornesc azboxul si in terminal apare UUU si nu pot da nico comanda
Aveţi nevoie de:
TFTPD32
backup_kernel
chit
Interfaţă serială pentru conectarea la AZBox
Trebuie să ştii că adresa IP a computerului dvs., puteţi afla dacă introduceţi PROMT comanda,
inseamnă că sunteţi de gand să inceapă şi să rulaţi in caseta de tip cmd şi apăsaţi ENTER, apoi tastaţi ipconfig şi introduceţi şi veţi obţine informaţii despre adresa IP
Presupunand că adresa IP a computerului: 192.168.1.12 (necesar de mai jos)
In acest caz, vom alege adresa IP pentru rang AZBox in cazul in care IP a computerului, vom spune: 192.168.1.34
1.Pokrenite TFTPD32
2.Start Putty, a comuta la serial, introduceţi portul COM unde aţi conectat interfata seriala, introduceţi viteza de 115200
3.Povezite interfata seriala cu AZBox şi rotiţi AZBox
4.Pratisnite CTRL + C pentru a opri bootiranje
5.kucajte:
y.ipaddr setxenv "192.168.1.34"
y.gateway setxenv "192.168.1.1"
y.subnetmask setxenv "255.255.255.0"
net init
b-sarcină tftp: / / 192.168.1.12/backup_kernel 0xb0100000
pflash scrie-f 0x80000 0xb0100000 0x680000
Acum, aşteptaţi pană la prima contururile flash, apoi introduceţi un nou conţinut.
Acest lucru durează aproximativ 5-6minuta, rabdare pentru a finaliza şi in cele din urmă vă rebootajte AZBox.
Dacă totul a mers bine, veţi obţine la TV intr-o actualizare standard care ştiţi că,
introduceti stick-ul USB cu Oficial FW-om şi ubacitega ca inainte.
"BlackShadow2 Ver 1 spec AzBox
Very fast skin.
This skin is copyright © protected and can not be used without my permission
So AzBox have my permission to use."
"Skin is in the hands of AzBox team.
This is first test version ...
Works very nicely and fast. "
............................................................by Matrix10
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Enigma v1.0.26 by the_ripper and team
>>>>>>>>IMPORTANT !!!<<<<<<<<<<
Pentru acesta versiune este nevoie de noua versiune de AZUP
Download: AzUP v1.1 by telesat
Enigma2:
What is new :
DiseQc FIX ( 1.0 , 1.1 , 1.2 manual and USALS )
DVB-S2 FIX
Added /boot partition so no more errors durring installation of IPKG
Integrated BlackShadow2 Skin from Matrix10 ( thanks to Matrix10 ).
DOWNLOAD: Enigma v1.0.26
BOOTING PROBLEM FIX !!!
After making flash, please imidiatelly go in RESCUE MODE ( Reboot box with USB Memory stick with patch.bin file inserted in RECEIVER ).
Telnet and FTP username and password are :
username: root
password: azbox
After RESCUE MODE show You IP of Your receiver , use putty and telnet to it and type this commands :
Code:mkdir /D mount /dev/hda1 /D
Connect with FTP to Your Reciever, and go :
/D/etc/init.d and place this bootup file which is there.
Overwrite : YES
Eject USB, Turn off and Turn on Your receiver and all will be ok.
DOWNLOAD: bootup.zip
---------- Post added at 09:48 ---------- Previous post was at 09:18 ----------
UPDATE pentru Enigma 2 1.0.25 (DiseQc Fix)
For those with DiseQc not working, download and unpack all files :
Go back to previous version of Enigma 2 1.0.25 and do this :
Go in rescue mode :
Code:mkdir /D mount /dev/hda1 /D
FTP to Receiver :
File cx24116.ko copy to :
/D/lib/modules/2.6.22.19-19-the_ripper/extra/
When asked to Overwrite, say Yes
File Tunerinfo.py copy to :
/D/usr/lib/enigma2/python/Components
File enigma2 copy to :
/D/usr/bin
When asked to Overwrite, say Yes
Remove USB Stick, and turn off and turn on receiver so all will work.
DOWNLOAD:Update_for_E2_Azbox_1.0.25.zip
: Toate versiunile prezentate pana in acest moment, sunt VERSIUNI PENTRU TEST !!!
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
un link util:
http://www.azbox-enigma.eu/
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Enigma 2 v1.0.27
Devices suitable for flashing : Elite and Premium
What is new :
- DiseQc FIX ( 1.0 , 1.1 , 1.2 Manual and USALS too )
- DVB-S2 FIX
- Integrated BlackShadow2 skin by Matrix10
- Fixed boot error
Download: http://www.azbox-enigma.eu/?p=63
Enigma v1.0.27
ATTENTION: Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!
Last edited by zildan; 24-10-10 at 22:15. Reason: corectii
How to use AZUp by @telesat
Because they appeared quasi instructions for AZUp use and procedures for the insertion of E2 in AZBox
I prepared a short and precise instructions - exactly what you need to do
btw , I must to mention , ignore wrong "tutorials" with wrong directions
as : you must use Format App realy funny because AZUp manage partitions of your AZBox
Ignore quasi instructions and use this official instruction from the author of AZUp
We have 3 situation :
I) You have Official FW in your AZBox andyou want to install E2
II) You have E2 in yourAZBox and now you want to install official FW
III) You have E2 in your AZBox and now you want to install new/update of E2
I) You have Official FW in your AZBox andyou want to install E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
Follow messages on GUI for update official FW (standard procedure)
After about 1 min , your receiver will reboot
Dont remove USB Stick from AZBox !!!
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully
II) You have E2 in yourAZBox and now you want to install official FW
Switch off AZBox
Put usb stick with patch.bin (Official FW)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp Create 4 partition on DOM and formatted them
Copyng Official (old) kernel in Flash (about 2.5 min)
when get popup msg - first part of update is done, but dont remove USB stick from AZBOX
wait for reboot , and follow messages on GUI for update official FW (standard procedure)
III) You have E2 in your AZBox and now you want to install new/update of E2
Switch off AZBox
Put usb stick with patch.bin (e2)
switch on AZBox
wait for IP adress on VFD of AZBox
Start latest ver of AZUp
Write IP adress in AZUp (see VFD)
Click on button Update
AZUp check for resque mode, also check ver of patch.bin (E2 or official fw)
AZUp create cramfs, Create 3 partition on DOM and formatted them
Copyng E2 kernel in Flash (about 2.5 min)
Copyng E2 files in first DOM partition (about 1 min)
when get popup msg - remove usb stick and wait for reboot (Rebooting... msg on VFD)
New E2 is installed successfully
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam