Smargo Smartreader Plus -> Oscam -> RSP

[redrobin]

Could anyone confirm the settings for using a Smartgo Smartreader plus for use with Oscam on RSP image.

[zildan]

http://sateliti.info/showthread.php?t=15878

FTDI driver is included in latest images.

[redrobin]

Thanks Zildan, i'm using RSP V3.128, Smartreader version 1.3

Now getting the following

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Sep  6 11:46:02 2010
-------------------------------------------------------------------------------
2010/09/06 11:46:02    783 s   version=0.99.4svn, build #2974, system=sh4-amino-linux, nice=-10
2010/09/06 11:46:02    783 s   max. clients=29, client max. idle=120 sec
2010/09/06 11:46:02    783 s   max. logsize=500 Kb
2010/09/06 11:46:02    783 s   client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2010/09/06 11:46:02    783 s   shared memory initialized (size=497258, fd=3)
2010/09/06 11:46:02    783 s   auth size=4772
2010/09/06 11:46:02    783 s   services reloaded: 0 services freed, 1 services loaded
2010/09/06 11:46:02    783 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/09/06 11:46:02    783 s   signal handling initialized (type=sysv)
2010/09/06 11:46:02    783 s   can't open file "/var/keys/oscam.srvid" (err=2), no service-id's loaded
2010/09/06 11:46:02    783 s   can't open file "/var/keys/oscam.tiers" (err=2), no tier-id's loaded
2010/09/06 11:46:02    783 s   can't open file "/var/keys/oscam.provid" (err=2), no provids's loaded
2010/09/06 11:46:02    783 s   monitor: disabled
2010/09/06 11:46:02    783 s   camd 3.3x: disabled
2010/09/06 11:46:02    783 s   camd 3.5x: disabled
2010/09/06 11:46:02    783 s   cs378x: disabled
2010/09/06 11:46:02    783 s   newcamd: disabled
2010/09/06 11:46:02    783 s   cccam: disabled
2010/09/06 11:46:02    783 s   radegast: disabled
2010/09/06 11:46:02    783 s   logger started (pid=784)
2010/09/06 11:46:02    783 s   Resolver thread started
2010/09/06 11:46:02    783 s   http started (pid=786)
2010/09/06 11:46:02    783 s   reader started (pid=787, device=001:005, detect=cd, mhz=357, cardmhz=357)
2010/09/06 11:46:02    783 s   waiting for local card init
2010/09/06 11:46:02    786 h   HTTP Server listening on port 84
2010/09/06 11:46:02    787 r02 Found smartreader device 001:005
2010/09/06 11:46:02    787 r02 card detected
2010/09/06 11:46:06    787 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 
2010/09/06 11:46:06    787 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2010/09/06 11:46:07    787 r02 [videoguard2-reader] type: VideoGuard BSkyB (0963)
2010/09/06 11:46:07    787 r02 card system not supported
2010/09/06 11:46:07    787 r02 Normal mode failed, reverting to Deprecated Mode
2010/09/06 11:46:10    787 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 
2010/09/06 11:46:11    787 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2010/09/06 11:46:12    787 r02 [videoguard2-reader] type: VideoGuard BSkyB (0963)
2010/09/06 11:46:13    787 r02 card system not supported
2010/09/06 11:46:13    787 r02 card initializing error
2010/09/06 11:46:13    783 s   init for all local cards done
2010/09/06 11:46:13    783 s   anti cascading disabled
2010/09/06 11:46:13    783 s   dvbapi: initialized (pid=789)
2010/09/06 11:46:13    789 c01 plain dvbapi-client 127.0.0.1 granted (kathy, au=0)
2010/09/06 11:46:15    789 c01 dvbapi: [ADD PID 0] CAID: 0960 ECM_PID: 0508 PROVID: 000000
2010/09/06 11:46:15    789 c01 dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 0508 PROVID: 000000
2010/09/06 11:46:15    789 c01 dvbapi: [ADD PID 2] CAID: 0963 ECM_PID: 0508 PROVID: 000000
2010/09/06 11:46:15    789 c01 dvbapi: new program number: C7A9 (0960:C7A9 unknown)
2010/09/06 11:46:15    789 c01 kathy (0963&000000/C7A9/75:B631): rejected group (129 ms) ()
2010/09/06 11:46:15    789 c01 kathy (0960&000000/C7A9/75:B631): rejected group (129 ms) ()
2010/09/06 11:46:15    789 c01 kathy (0961&000000/C7A9/75:B631): rejected group (129 ms) ()
2010/09/06 11:46:15    789 c01 dvbapi: try pids again #1
2010/09/06 11:46:18    789 c01 kathy (0963&000000/C7A9/75:A1D0): rejected group (129 ms) ()
2010/09/06 11:46:18    789 c01 kathy (0960&000000/C7A9/75:A1D0): rejected group (129 ms) ()

My oscam.server is

[reader]
reconnecttimeout = 5
label      = remote
protocol   = cccam
device     = 192.168.0.9,12000
account    = kathy,password
group      = 1
caid       = 0963
cccversion = 2.1.4
enable = 0
#cccbuild   = 3191
[reader]
label    = mysmartreader
protocol = smartreader
device   = 001:005
aeskey   = 0102030405060708090a0b0c0d0e0f10
group    = 1
caid     = 0963
boxid = ####### (my boxkey from cccam here)
#mhz = 357
#Cardmhz = 368
EMMCache = 1,3,2
blockemm-u = 0
blockemm-s = 0 
blockemm-g = 1 
blockemm-unknown = 0
#detect = CD
enable = 1

I already had it working connected to a cccam server on another local receiver, just want to get it working locally as well


After restarting the log now has a lot of these entries:-
r02 usb bulk write failed : ret = -1

[zildan]

Try tu use list_smargo-sh4-amino .
Full oscam pack.

[redrobin]

Output from list_smargo


./list_smargo-sh4-amino
bus 001, device 004 : 0403:6001 Smartreader (Device=001:004 Serial=?)

In my oscam.server above it was 5, because i'd unplugged it and put it back, got device using :-

cat /proc/bus/usb/devices

Do i need insmod $MODDIR/ftdi.ko in start.sh, currently

mknod /dev/ttyUSB0 c 188 0
chmod 666 /dev/ttyUSB0
insmod $MODDIR/usbserial.ko
insmod $MODDIR/pl2303.ko

[redrobin]

For some reason my start.sh is not being processed, if i try
. /var/config/start.sh
i get the following error:-


Kathy_RSP:/var/config# . /var/config/start.sh
-sh: .: line 1: can't open /var/config/symlink
Kathy_RSP:/var/config#

The file is there it contains
SYMLINK="/usr/lib/enigma2/python/Plugins/Extensions/Fantastic"

Whilst looking at the file, i think it only loads usbserial if newcs is used, dont know enough about linux to tell properly.