gbox.net (ARM/PPC/MIPS/SH4)

[valerica]

Gbox.net svn771
Features :
fix cryptoworks emulator on ppc & arm (tested only in offair-mode )
svn770 (single tuner)
- enable cryptoworks emulator
- enable pid logger
- fix viaccess2/3 emulator
- start sci-support (stapi) on sh4 arch
svn727 (single tuner)
- fix peer level and flag
svn725 (single tuner)
- fix cwshare Flag A
- fix smargo-support on mips stb
- optimize multicam access
- optimize hello requests
svn723 (single tuner)
- add irdeto camkey calculation modul (use real cardfiles)
- add T1 Smargo support (only tested with HD+ smartcard on coolstream stb)
- fixed share modul
- cleanup code
svn702 (single tuner)
- fix for long cryptoworks ecms
- fix sci support on mips and ppc (sorry)
svn700 (single tuner)
- fix cas interface
- fix multicam interface
- cleanup code
svn689 (single tuner)
- add mcr support
- add linuxtv ppc
svn685 (single tuner)
- cleanup code ( hope not too much )
- rebuild etsi-parser (pmt,cat)
- add stapi sh4 binary (without sci-support and tested on Atevio.7000HD IRD-1.8.34)
- add linuxtv mips
svn610 (single tuner)
- fix ORF/SRG card support
svn608 (single tuner)
- add v13 support
- add record mode on coolstream
- cleanup code
svn563 (single tuner)
- fix internal reader support
- fix smargo support
- cleanup code
svn522 (single tuner)
- add nagra tiger cas support
- fix resync
- cleanup code
svn513 (single tuner)
- fix pmt parsing
- set pid/sid filter to 128
- add dt06 session negotiation
- add irdeto2 emu
- add cryptoworks cas au
- add seca cas au
svn499 (single tuner)
- first coolstream binary

[f11]

Sa inteleg ca pina la urma sursele de gbox sunt cunoscute si se incearca "revigorarea" gbox???
A testat cineva???

f11

[zildan]

Gbox svn773 (ARM/PPC/MIPS/SH4)

- fix ignore list ( max. 2048 )
- fix NDS support on arm
- fix smargo support on arm/sh4

[prodata]

Cum se instaleaza pe un dm800 de ex.? Ce script folosim? Mai e nevoie de dccamd? Care sunt setarile noi suplimentare? Citeste cardul din smargo?

Nu am gasit nicaieri explicatii.
Am pus pe dm800 gp2 5.1, dar black screen. Nu decodeaza. Ce e gresit? sau la ce sa fiu atent?

[prodata]

Ce am mai gasit:

Gbox.net - Info
################################################## ##################

The gbox definitely go all the readers I know so
So Smargo, Easy Mouse, Multiprog, Multi Mouse, SC8in1, MCR and so on.
If you have a reader with a serial port you brauchts
USB to Serial Adapter another, either with a FTDI or PL2303
Chipset.

These will be controlled either via com1 or com2.
A Smargo, Easy Mouse, Multiprog, Multi Mouse needs to be addressed again inverted so that it reads the card clean.
You may also use a USB hub, connect to your box, but at the moment
gbox, the only 2 Smargos, Easy Mouse and so on, is still
extended.

I will get yet.

The settings for this reader is in the gbox_cfg

V: {00 31} # With this setting, the 2 internal reader, and
an external reader SC8in1, MCR and 4in1 8in1 addressed #

V: {00 35} # With this setting, the 2 internal reader, and
an external reader such Smargo, Easy Mouse, Multiprog, Multi Mouse
inverted addressed #

V: {00 3F} # With this setting, the 2 internal reader, and a USB HUB + 2 Smargos addressed #


F: {43} / dev/ttyUSB0 / / rs232 com1 # Here are mentioned the reader on com1 #

# F: {44} / dev/ttyUSB1 / / rs232 com2 # Here are mentioned the reader on com2 #

If you run a USB hub with 2 Smargos then you have F: {43} and F: ON {44}.

# Disable (set to 1) it ONLY if you have problems with or you want ioperm
# To use a usb-to-rs232 smartcard reader
F: {A1} 1 # # If indeed there for what

Smargo information:
----------------
Firmware 1.5
Mode: Auto
Kernel: Normal
T-mode = 0
EGT: 0

[zildan]

Am reusit azinopate sa il pornesc pe kathy cu e2.
Deschide si din key si din sharing foarte bine.
Mai am de lucru cu setatul localului.
Pe Alien cu SPARK vede localul da nu am reusit sa il fac sa deschida.