SMP8650 Series:
SMP8650_br.pdf
RTi team got exclusive news, that OpenSat is prepairing new models, which will probably be announced on Anga Cable Show in Germany, so We want to inform all of You that our team will support this new models with Enigma 2 and Neutrino HD.
Here are some information about Hardware :
AzBox Me ( Aluminium Body )
Operating System: Linux
Processor (CPU): SIGMA processor SMP 8655 AD ( 667 MHz + 333 MHz , 1230 DMIPS )
Memory: 512 MB RAM + 1 GB On Board Storage Memory ( Storage )
Flash Memory: 128 MB
Tuner: Single tuner (DVB-S2 or DVB-T/DVB-C) embedded.
DiSEqC: 1.0, 1.1, 1.2, USALS
HDD: eSATA and internal SATA
Video Output: PAL / NTSC
Video Containers:
MPEG1/2/4 (M1V, M2V, M4V); MPEG1/2 PS (M2P, MPG); MPEG2 Transport Stream (TS, TP, TRP, M2T, M2TS, MTS), VOB, AVI, ASF, WMV, IFO, ISO; Matroska (MKV), MOV (H.264), MP4, RMP4
Video Codecs:
XVID SD/HD; MPEG-1; MPEG-2: MP@HL; MPEG-4.2: ASP@L5, 720p, 1-point GMC; WMV9: MP@HL; H.264: BP@L3; H.264: MP@L4.0; H.264: HP@L4.0; H.264: HP@L4.1; VC-1: MP@HL; VC-1: AP@L3
Audio Containers:
AAC, M4A, MPEG audio (MP1, MP2, MP3, MPA), WAV, WMA, FLAC, OGG
Audio Codecs:
AAC, AAC+, Dolby Digital, DTS, WMA, WMA Pro, MP1, MP2, MP3, LPCM, FLAC, Vorbis, DTS (Audio Passthrough); Dolby Digital (Audio Passthrough)
Picture Support:
JPEG, BMP, GIF
Subtitle Supported:
SMI, SRT, TXT, SUB, SSA
Resolution:
576i (480i), 576p, (480p), 720p, 1080i, 1080p
Ethernet:
10/100 Base-T Ethernet (max.100Mbit/s)
Front Panel:
1x USB 2.0; Coloured Leds, VFD; Power Button
Rear Panel:
1x HDMI; 1x Component (YcbCr); 1x RCA Video; 1x RCA Audio (L/R); 1x e-SATA1x RJ45; 1x USB 2.0; 1x Optical S/PDIF; Power Switch;
Lateral Panel:
1x CR Slot
As far we got information approx. end user price of this STB will be under 200 EUR.-
We also got info that this model will run officially Android 2.2 OS, and ofcourse our team will give Enigma 2 and Neutrino HD support.
AzBox ???? ( We dont have name for this model )
Operating System: Linux
Processor (CPU): SIGMA processor SMP 8653 ( 1230 DMIPS )
Memory: 256 MB RAM
Flash Memory: 128 MB
Tuner: Single tuner (DVB-S2 or DVB-T/DVB-C) embedded.
DiSEqC: 1.0, 1.1, 1.2, USALS
HDD: eSATA
Video Output: PAL / NTSC
Video Containers:
MPEG1/2/4 (M1V, M2V, M4V); MPEG1/2 PS (M2P, MPG); MPEG2 Transport Stream (TS, TP, TRP, M2T, M2TS, MTS), VOB, AVI, ASF, WMV, IFO, ISO; Matroska (MKV), MOV (H.264), MP4, RMP4
Video Codecs:
XVID SD/HD; MPEG-1; MPEG-2: MP@HL; MPEG-4.2: ASP@L5, 720p, 1-point GMC; WMV9: MP@HL; H.264: BP@L3; H.264: MP@L4.0; H.264: HP@L4.0; H.264: HP@L4.1; VC-1: MP@HL; VC-1: AP@L3
Audio Containers:
AAC, M4A, MPEG audio (MP1, MP2, MP3, MPA), WAV, WMA, FLAC, OGG
Audio Codecs:
AAC, AAC+, Dolby Digital, DTS, WMA, WMA Pro, MP1, MP2, MP3, LPCM, FLAC, Vorbis, DTS (Audio Passthrough); Dolby Digital (Audio Passthrough)
Picture Support:
JPEG, BMP, GIF
Subtitle Supported:
SMI, SRT, TXT, SUB, SSA
Resolution:
576i (480i), 576p, (480p), 720p, 1080i, 1080p
Ethernet:
10/100 Base-T Ethernet (max.100Mbit/s)
Front Panel:
1x USB 2.0; Coloured Leds; Power Button
Rear Panel:
1x HDMI; 1x JACK; 1x e-SATA1x RJ45; 1x Optical S/PDIF; Power Switch;
Lateral Panel:
1x CR Slot
As far we got information approx. end user price of this STB will be under 120 EUR.-
Ofcourse our team will give Enigma 2 and Neutrino HD support.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
SMP8650 Series:
SMP8650_br.pdf
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Specificatiile sunt dezamagitoare pentru multimedia la nivelul anului 2011 :
- lipseste ethernet 1000 Mb / gigabit ;
- lipseste wireless N ;
- lipseste suportul pentru hd audio , dts hd ma si dolby truehd .
ca si procesor stie cele specificate ca si lipsuri, ramane de vazut configuratia finala a MB, si daca vor incorpora modul wireless.
http://www.sigmadesigns.com/media_pr...r_overview.php
problema nu e configuratia sau procesorul, ci daca ceva cei de la OpenSat vor face ceea ce trebuie vis a vis de o colaborare COMPLETA cu Sigma.
Last edited by qwess; 30-03-11 at 11:05.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
AZBox me
Operating System: Linux (Android by Google-Sigma & Neutrino/E2 RTi Team )
Processor (CPU): SIGMA processor SMP 8655 AD ( 667 MHz + 333 MHz , 1230 DMIPS )
Memory: 512 MB RAM + 1 GB On Board Storage Memory ( Storage )
Flash Memory: 512 MB
Front panel is maded from Aluminium + Metalized Glass, behind which is VFD Display.Code:# cat /proc/cpuinfo system type : Sigma Designs TangoX processor : 0 cpu model : MIPS 24K V7.12 FPU V0.0 Initial BogoMIPS : 1230.75 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes ASEs implemented : mips16 shadow register sets : 1 VCED exceptions : not available VCEI exceptions : not available System bus frequency : 333000000 Hz CPU frequency : 667000000 Hz DSP frequency : 333000000 Hz
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
doar cateva zile pana la aparitia primelor imagini oficiale cu cele 2 noi receivere marca AZBox,
Me si miniMe:
AZbox miniMe
Azbox Me
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Parerea mea :
Pros :
- processor
- memory
- sistemele de operare
Cons :
- nu hdmi 1.3 (da posibilitatea dts ma and dolby true hd)
- lateral card slot
- fara gigabit lan
- fara wireless
- fara usb 3.0
- single tuner (cea mai proasta solutie) .
Astept Me + , lol .
probabil or sa scoata si un + cu cele cerute-wifi/twin dar la un +price, din ce am inteles asta au si in plan.
daca Me nu va depasi 200€ cum se speculeaza eu zic ca sunt destul de ok.
Sa asteptam primele impresii, preturi, important vis-a-vis de SO este trecerea de la politica proprietara la cea opensource ceea ce conteaza enorm(Neutrino/E2/android).
Ce ar fi insemnat ca si pret final o implementare USB3.0, wifiN, gigabitLAN,twin...era bine nu zic nu.
Un HDMI1.3 necesar mai mult pentru video, pentru partea audio DT- HD, DTS-HD,MA...se rezolva prin OT la un HC compatibil.
Eu zic sa mai asteptam sa vedem ce "zice" si configuratia actuala si cum e motorizata si tragem linie pe urma..
Era ok daca tot au scos 2 modele sa fi scos actualul Me si un Me+, acel miniMe nu-i vad rostul, poate pentru cei ce pleaca cu rulota
Last edited by qwess; 06-05-11 at 10:30.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
preturile aproximative: azbox miniMe 150-200€, azbox Me 200-250€, disponibile in Romania pentru vanzare ~ 2 luni, sunt asteptate primele aparate pentru test!
ca si dimensiuni cica ar fi identice.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
De la nea derektoru de OpenSAT, zice asa:
Dear AZFans:
In the past, AZBox was more turned to work with Linux, though with strategic partnerships that allowed us to have some products differentiated from our competitors.
Those solutions, however, were always developed under NDA and it did not allow us to open the SET TOP BOX code as much as we want.
Now the situation is different and we are endeavoring a lot of efforts to develop a more OPEN box and counting on the cooperation of the community. So, at ANGA Cable 2011 we will not only introduce a new range of STBs, but we will also present a new way to watch the development of our products and have real open source policies. Our objective is to develop together and grow with the community and not against it!
Furthermore, we will transfer this philosophy to our actual line models (AZBox Premium HD+, AZBox Elite HD, AZBox Ultra HD) and start from the beginning with those policies with AZBox Me and AZBox miniMe.
See you at ANGA!
Best Regards
Hugo Condessa
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
teste E2 RTi pe noile receivere azbox me by telesat®
test E2 zap speed 16°E:
http://youtu.be/CSkD_Bqh8JA
test E2 zap speed 19.2°E:
http://youtu.be/kpN8-a2nCDs
test E2 multimedia HD(1080p-DTS)-USB HDD(external):
http://youtu.be/93MDCiohoRo
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
News(neoficiale)
-Se pare ca azbox Me (miniMe?) prezinta suport hardware BlindScan 4:2:2, cat si pentru cele cu modulatie profesionala 16APSK-32APSK!
-Potrivit unor zvonuri(retaileri), parteneriatul cu CELRUN ar fi luat sfarsit, fw5306 posibil ca fiind ultimul fw eliberat de catre acestia.
-Dezvoltarea Android si suportul pentru drivere va fi asigurata de catre Sigma Designs şi Opensat, iar pentru modelele AZBox Premium, Premium +, Elite, Ultra se afla in testare o versiune de neutrino ce va fi lansata sub numele de "opensat hd".
cateva imagini cu noile modele:
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam