Code:
v.0.6.9
- coolstream: dvbapi fixxed
v.0.6.9a
- coolstream: libnxp.so fixxed
v.0.6.9b
- ASUS-WL*** Platform added (only static, K24 ok, K26 untestet (K26 setable by Main-Setup)!!!)
- many generall code fixxes/optimized part11
v.0.6.9c
- buildall: fritzbox fixxed
- logfiles deactivated. All output now in terminal. On error see terminal-output
v.0.6.9d
- coolstream: fix libnxp.so sym doublecheck
v.0.7.0
- coolstream: pcsc fixxed (thx thE_29!)
v.0.7.0a
- fritzbox ALL update!
(gcc now 4.6 so old user must del their chain(s) in "../toolchains" and also easybuild.conf and start from beginning!)
v.0.7.0b
- small static-build fix
v.0.7.0c
- with_ssl build fix
v.0.7.0d
- many generall code fixxes/optimized part12
v.0.7.0e
- many generall code fixxes/optimized part13
- megapack: libssl added
v.0.7.0f
- webif OIA modfied (showing now under configuration -> files, Default are normal!)
- add file /oscam-svn/EasyBuildScript/EasyScript.patch (needed for patching webif-oia!)
(you also can easily put your own diff's in too if you have one ;) )
- many generall code fixxes/optimized part14
- ddwrt default without libusb/pcsc: lrt + ldl added (please test if cccam login ok now!)
- oscam binary easier identifying by name: OSCAM 1.00-unstable_EasyBuild_svn build #
v.0.8.0
- pcsc updated to 1.7.2
- ccid updated to 1.4.3
- EasyScript.patch updated
- Show Memory in Webif now optional, for turn on set: 0-mainsetup -> (X) Show_MEM (default off)
(thx gorgone)
If not 1st time build:
Please del "../oscam-svn/external_LIBS" folder and also del "/oscam-svn/EasyBuildScript/EasyBuild.conf" !!!
than do svn-update by: 1-y-y
OTHERWAY IT WON'T WORK!!
v.0.8.0a
- EasyScript.patch fixxed
- Easyconf check updated
v.0.8.0b
- EasyScript.patch del (not longer needed!)
v.0.8.0c
- webif oscam-http.h: Headline Size corrected to 15px
v.0.8.0d
- globals.h:
clientmaxidle-entry corrected (max 9999 default)
clientimeout-entry corrected (max 99999 default)
take care to set both to your preferred timeout in your config!
(if nothing set 9999/99999 are default!!!!)
- oscam-http.c:
webif-shutdown-restart corrected (set restarttime to 5 seconds for better refresh without 404)
v.0.8.0e
- many generall code fixxes/optimized part14
- get toolchains dreambox+nslu2unslung fixxed.
- add toolchain ppc-tuxbox-dbox2_old for: PPC Tuxbox Old (Dbox2, Dreambox 500/600)
(first do: get toolchain 4-13 than build-single 2-14, 1st time chain will build-finished and that takes some time ca 20mins up to 1h))
PLEASE TEST IF BINARY WORKING ON DBOX2!
v.0.8.0f
- showbuild_* off on fixxed
v.0.8.1
- clientmaxidle revert to 120 also clienttimeout reverted (fixed by Admin on svn, so patch no longer needed! many thx!!)
- dockstar: set build to static so on openwrt+debian working
v.0.8.1a
- webif: optional with Logo -> 0-mainsetup (x) With_WebLogo, default OFF (NO LOGO)
(x) Webif must also active for use!
if you want use different logo: edit make.sh line24 -> MYWEBIFLOGO="http://your/favorite/logo"
v.0.8.1b
- asuwsl: build libusb/pcsc check if always there fixxed
v.0.8.1c
- mainsetup 0 -> (x)With Loadbalancing added, default ON!
v.0.8.1d
- dvbapi ON/OFF fixxed
- mainsetup 0 -> (x) AntiDisconnectClient->camd35 only add, default OFF!
(if activated and using camd35-proto clients stay connected, unitresting what clientmaxidle= say!)
v.0.8.1e
- 0-mainsetup: (x) LCD support added, default off
v.0.8.2
- dynamic threads oscam svn support added.
for use set make.sh row 26/27:
#MYSVN="branches/dynamic-threads"
MYSVN="trunk"
to
MYSVN="branches/dynamic-threads"
#MYSVN="trunk"
NO support, no questions will be answered if using these test-branch for build!
do not mixxing by svn up the normal trunk with dynamic!
v.0.8.2a
- check linux-packages: cvs added
v.0.8.2c
- sh4-stapi: libstapi v.0.8a added (>=#5773) (thx _network)
v.0.8.2d
- OIA build fixed
v.0.8.2e
- general code fixxed part 15
v.0.8.2f
- create megapack: tar.gz renamed
v.0.8.3
- create megapack: some small gz fix on fritzbox
- fix menuentry/code against ppc-dreambox
- ../EasyBuildScript/EasyBuild.info added (detailed overwiev of supportet receivers/routers etc...)
(hopefully ok, if not please give me a note on streamboard @
http://streamboard.gmc.to/wbb2/thread.php?goto=firstnew&threadid=28878
)
v.0.8.3a
- ppc_old dbox2/dream, ssl deactivated! won't work on these old lib*.0.9.7!
v.0.8.3b
- build all: dvbapi/stapi on/off first round fixxed
v.0.8.3c
- get nslu2unslung chain fixxed
- new repository(git) for ppc_old added (old cvs.tuxbox.org down!) [thx seife!)
v.0.8.3d
- oscam-svn-rev > 5620 showWebLogo fixxed
v.0.8.3e
- oscam dynamic build fix ppc-dream
v.0.8.3f
- oscam dynamic build fix ppc-dream update
v.0.8.3g
- oscam unstable: webif-version-info size fixxed
v.0.8.4
- oscam dynamic build fix i686 libusb (thx _network)
v.0.8.4a
- sh4 build fixxed
v.0.8.4b
oscam unstable: version update to 1.20
v.0.8.4c
- add stable 1.10rc build:
make.sh line23-29:
______________________________________________
### dynamic-threads SVN ###
#MYSVN="branches/dynamic-threads"
### unstable-trunk SVN ###
MYSVN="trunk"
### stable SVN ###
#MYSVN="tags/1.10"
#############################################
_______________________________________________
remove "#" for your preferred build BUT DONT MIX IT!
always use for each MYSVN an empty folder and place make.sh in than do 1-Y !!!
v.0.8.4d
- ALL: remove anti-disconnect from config (not longer working)
v.0.8.4e
o-update ALL: fix MYSVN= if not default!
v.0.8.4f
- ALL: build fixxed
v.0.8.4g
- ALL: build fixxed part2
v.0.8.5
- config: ipv6support (WebIf IPv6 support) added (experimental see timeline)
v.0.8.5a
- oscam-setup->mainsetup fixxed
v.0.8.5.b
- fritzbox70**/71**/72**: freetz-trunk-gcc updated from 0.9.29 to 0.9.31.1 so please del old "../oscam-svn/toolchains/freetz-trunk" also del "easybuild.conf" and "external_LIBS/Fritzbox" and rebuild!
or revert on make.sh to old:
# old number
#FRITZGCCNUMBER="0.9.29"
# new number
FRITZGCCNUMBER="0.9.31.1"
v.0.8.5c
- fritzbox build: little cosmetic
v.0.8.5d
- fritzbox7390: set back to correct gcc 0.9.29
# old number
#FRITZGCCNUMBER="0.9.29"
# new number
FRITZGCCNUMBER="0.9.31.1"
FRITZGCCNUMBER7390="0.9.29"
v.0.8.5e
- fritzbox7390: little cosmetic
v.0.8.6
- fritzbox build: seperated 7140/70 + 7240/70 + 7390
- new entry in 0-oscam-setup -> FritzboxSetup
please activate there your preffered fritzbox, than 4-get_toolchains and build for them by 2-2.
(note for 7240/70: take care you have also updated your Fritzbox-Firmware to actual ones(uclibc0.9.31.1)! if not oscam binary can give segfaults!)
v.0.8.6a
- pcsc updated to 1.7.4
- ccid updated to 1.4.4
(please del external_LIBS -folder and easybuild.conf than start make.sh again for using new pcsc/ccid)
easybuild.conf:
###PCSC##########
PCSCVERSION=1.7.4
PCSCDLID=3598
CCIDVERSION=1.4.4
CCIDDLID=3579
v.0.8.6b
- all boxes with internal-CR "SCSI_DEV" now generally activated!(dreambox, azbox, coolstream, ppc-dreambox, ppc-old-dreambox/dbox2)
v.0.8.6c
- DEV_SCI SPECIAL for sh4 boxes add (see main-setup!)
(if need sh4-internal-CR support activate: ONLY sh4 entry, else NOT-SH4!)
on build-all for ALL sh4 SCI is off so if needed use singelbuild-option ONLY!
v.0.8.6d
- DEV_SCI_SH4 fixxed
Orice versiune oscam-easy-build poate fi descarcata de aici :
http://www.streamboard.tv/wbb2/thread.php?threadid=29019&threadview=0&hilight=&hilightuser=0&page=2
(necesita logare)