Results 1 to 10 of 10

Thread: USB FTDI by Gelvis pe UFS910 ?

  1. #1
    Member Visitor
    Join Date
    14 Feb 2008
    Location
    Bucuresti
    Posts
    7
    Post Thanks / Like

    Default USB FTDI by Gelvis pe UFS910 ?

    Salut all

    Am achizitionat un Phoenix card reader by Gelvis pe USB cu cipset FTDI.
    Atasat interfata pe un port usb la kathy.
    Activat driver-ul FTDI din meniul Nebula 2.
    Introdus card j*ji in slot.
    M-am jucat cu conf-ul Oscam-ului putin insa fara succes.
    In consola,pe debug nu arata nimic la introducerea card-ului sau conectarea interfetei.
    Am nevoie de informatii sau link catre cea ce trebuie sa fac mai departe pentru a functiona.
    Multumesc anticipat.

  2. #2
    Standard RSP member
    Join Date
    10 Nov 2007
    Location
    Bucuresti
    Posts
    181
    Post Thanks / Like

    Default

    ai resucitat ufs-ul?cu memorie mai lunga ?
    DM800HD,2XDM500,TRIAX 11O fer,H-H DM2800,un ceaun de focus
    Multumesc RSP,si cit mai multe discutii

  3. #3
    Golden Member Diablo1's Avatar
    Join Date
    29 Mar 2009
    Location
    Austria - TM
    Posts
    1,871
    Post Thanks / Like

    Default

    Sau poate il intrebi pe Gelvis cum functioneaza daca tot le vinde , el trebuie sa stie sigur

  4. #4
    Member Visitor
    Join Date
    14 Feb 2008
    Location
    Bucuresti
    Posts
    7
    Post Thanks / Like

    Default

    radutyu, Am rezolvat,multumesc pentru hint,acum foloseste cam 90Mram,am raspuns in cadrul discutiei insa dupa o pagina scrisa,mi-a afisat ca va fi postat dupa aprobarea moderatorilor insa..nu a mai aparut postul,explicasem ce si cum.

    Diablo1, Gelvis a spus ca nu stie cum sta treaba cu Kathy,l-am rugat macar un setting de unde sa ma inspir de pe DM800 care-l detine si a spus ca merge pur si simplu,doar atasat..........

    Asa ca am deschis acest topic.

    Vroiam macar sa-l vad ca pilpaie ceva pe ttyUSB0 insa inca nu m-am dumirit ce comenzi sa dau din consola,BusyBox ma cam depaseste pentru moment.Pe win7 a fost probat si e ok.
    Trebuie macar sa asimilez principiul de functionare...

  5. #5
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    5,238
    Post Thanks / Like

    Default

    Conteaza ce imagine ai instalata, pentru ca trebuie verificat daca ai suport pentru adaptorul serial in kernel sau trebuie sa incarci module suplimentare si sa creezi device-urile in /dev.
    Asteptam lamuriri din partea ta.
    Sh40, prime focus 1,5m si altele ...

  6. #6
    RSP Enigma Team & GM
    Join Date
    04 Feb 2007
    Posts
    312
    Post Thanks / Like

    Default

    @ shoimuletz
    porneste din telnet oscamul si posteaza aici.Pe nebula daca ai instalat si la status iti apare ca si ftdi enabled trebuie sa-ti mearga readerul ftdi.
    f11
    PS Posteaza si rezolvarea cu bootloaderul 128mb.

  7. #7
    Member Visitor
    Join Date
    14 Feb 2008
    Location
    Bucuresti
    Posts
    7
    Post Thanks / Like

    Default

    Zildan:
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0001
    Bus 001 Device 002: ID 05e3:0608
    Bus 001 Device 003: ID 1687:3252
    Bus 001 Device 004: ID 0403:6001
    ufs910:~#
    Ultimul device este cel ce apare cind conectez interfata pe portul USB
    imaginea este ufs910_GIT-4404_PKT-1754
    in /dev/ttyUSB0 e creat automat
    Din meniu am optiunea sa activez FTDI si la status e activa.
    Problema consta in faptul ca nu stiu ce pasi trebuiesc urmati si ce comenzi sa dau in consola

    F11:
    Nu stiu sa pornesc Oscam-ul din consola insa e pornit din meniu si merge sharing-ul insa interfata nu stiu cum trebuie configurata.
    in legatura cu resuscitarea,mi-a oferit un link Radutyu,urmeaza-l si o rezolvi repede,nu uita sa populezi MB cu un conector mama de 2X10 pini si adopta varinanta cu FT4232Hight si foloseste doar doua virtuale,cu 2232 nu mi-a mers,datasheet-ul lui 7100 pentru verificare si gata(nu sari de 3,6v)

    Radutyu:
    Mai am cateva module de RAM,te pot indruma sa lungestimemoria,daca doresti,deschid un alt topic sa nu le amestecam.
    in principiu pasii sunturmatorii:Schimbi memoriile apoi faci update la butloader (U-boot) cu versiune de 128.
    Eu gresisem deoarece prima oara am schimbat U-boot cu suport de 64,apoi U-boot cu suport de 128 si apoi memoriile insa dupa upload-ul de U-boot cu suport de 128M,a ramas palie masina .
    Cama asa arata pe debug acum:

    Board: STb7100 Kathrein UFS910 [128MB]


    U-Boot 1.3.1 (Mar 21 2012 - 16:45:29) - stm23_0046

    DRAM: 128 MiB
    NOR: 16 MiB
    In: serial
    Out: serial
    Err: serial
    Hit any key to stop autoboot: 0
    ufs910>


    board=stb7100ref_27
    bootdelay=1
    /devinit
    bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 copr ocessor_mem=2m@0x04000000,2m@0x04200000
    autoload=n
    ipaddr=192.168.1.103
    serverip=192.168.1.2
    gatewayip=192.168.1.1
    gateway=192.168.1.1
    netmask=255.255.255.0
    ethaddr=xxxxxxxxxxx
    bootdesc_1=HDD 1
    bootcmd_1=setenv bootdesc_default 1; saveenv; run bootargs_1; run bootkern_1
    bootkern_1=ide reset; ext2load ide 0:1 a5000000 /boot/uImage; bootm a5000000
    bootargs_1=set bootargs console=ttyAS0,115200 root=/dev/sda1 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=128m coprocessor_me m=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxxx init=/bin/devinit
    bootdesc_2=HDD 2
    bootcmd_2=setenv bootdesc_default 2; saveenv; run bootargs_2; run bootkern_2
    bootkern_2=ide reset; ext2load ide 0:2 a5000000 /boot/uImage; bootm a5000000
    bootargs_2=set bootargs console=ttyAS0,115200 root=/dev/sda2 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=128m coprocessor_me m=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxx init=/bin/devinit
    bootdesc_3=USB1 with HDD
    bootcmd_3=setenv bootdesc_default 3; saveenv; run bootargs_3; run bootkern_3
    bootkern_3=usb reset; ext2load usb 0:1 a5000000 /boot/uImage; bootm a5000000
    bootargs_3=set bootargs console=ttyAS0,115200 root=/dev/sdb1 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=128m coprocessor_me m=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxxxx init=/bin/devinit
    bootdesc_4=USB2 with HDD
    bootcmd_4=setenv bootdesc_default 4; saveenv; run bootargs_4; run bootkern_4
    bootkern_4=usb reset; ext2load usb 0:2 a5000000 /boot/uImage; bootm a5000000
    bootargs_4=set bootargs console=ttyAS0,115200 root=/dev/sdb2 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=128m coprocessor_me m=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxxxx init=/bin/devinit
    bootdesc_5=USB3 with HDD
    bootcmd_5=setenv bootdesc_default 5; saveenv; run bootargs_5; run bootkern_5
    bootkern_5=usb reset; ext2load usb 0:3 a5000000 /boot/uImage; bootm a5000000
    bootargs_5=set bootargs console=ttyAS0,115200 root=/dev/sdb3 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=64m coprocessor_mem =4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxxx init=/bin/devinit
    bootdesc_6=USB1 without HDD
    bootcmd_6=setenv bootdesc_default 6; saveenv; run bootargs_6; run bootkern_6
    bootkern_6=usb reset; ext2load usb 0:1 a5000000 /boot/uImage; bootm a5000000
    bootargs_6=set bootargs console=ttyAS0,115200 root=/dev/sda1 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=128m coprocessor_me m=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxx init=/bin/devinit
    bootdesc_7=USB2 without HDD
    bootcmd_7=setenv bootdesc_default 7; saveenv; run bootargs_7; run bootkern_7
    bootkern_7=usb reset; ext2load usb 0:2 a5000000 /boot/uImage; bootm a5000000
    bootargs_7=set bootargs console=ttyAS0,115200 root=/dev/sda2 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=128m coprocessor_me m=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxx init=/bin/devinit
    bootdesc_8=USB3 without HDD
    bootcmd_8=setenv bootdesc_default 8; saveenv; run bootargs_8; run bootkern_8
    bootkern_8=usb reset; ext2load usb 0:3 a5000000 /boot/uImage; bootm a5000000
    bootargs_8=set bootargs console=ttyAS0,115200 root=/dev/sda3 rw ip=192.168.1.103 :192.168.1.1:192.168.1.2:255.255.255.0:kathrein:eth0ff mem=64m coprocessor_mem =4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:xxxxxxxxx init=/bin/devinit
    bootdesc_9=USB UPDATE
    bootcmd_9=run bootkern_9
    bootkern_9=usb reset; fatload usb 0:1 a4000000 update; autoscr
    bootcmd=bootmenu
    bootdesc_items=10
    bootmenutimeout=5
    filesize=3C0000
    boot_param_version=22
    bootdesc_0=Flash 2.03 Reader
    bootcmd_0=setenv bootdesc_default 0; saveenv; run bootargs_0; run bootkern_0
    bootkern_0=bootm a0040000
    bootargs_0=set bootargs console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphy sarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000
    bootdesc_default=4
    stdin=serial
    stdout=serial
    stderr=serial

    Environment size: 4395/65532 bytes

    in rest,se misca mult mai bine si sta ocupata cam 90M din ram.

  8. #8
    Standard RSP member
    Join Date
    10 Nov 2007
    Location
    Bucuresti
    Posts
    181
    Post Thanks / Like

    Default

    Rugam moderatori daca mai exista acel post sa-l posteze
    DM800HD,2XDM500,TRIAX 11O fer,H-H DM2800,un ceaun de focus
    Multumesc RSP,si cit mai multe discutii

  9. #9
    RSP - TEAM zildan's Avatar
    Join Date
    05 Dec 2007
    Location
    Sudul Romaniei
    Posts
    5,238
    Post Thanks / Like

    Default

    In ce sectiune era postul?
    Sh40, prime focus 1,5m si altele ...

  10. #10
    Standard RSP member
    Join Date
    10 Nov 2007
    Location
    Bucuresti
    Posts
    181
    Post Thanks / Like
    DM800HD,2XDM500,TRIAX 11O fer,H-H DM2800,un ceaun de focus
    Multumesc RSP,si cit mai multe discutii

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •