hello

i have problem boot

no run in spark and enigma2

spark : ok+power+up+ok = display err

enigma2 : ok+power+down+ok = display err

Code:
Board: STx7111-Mboard (MB618)  [32-bit mode]
info: Disregarding any EPLD


U-Boot 1.3.1-g057e7c28 (Oct 21 2011 - 09:58:11) - stm23_0043 - YW 1.0.021 Rel

DRAM:  128 MiB
NOR:     8 MiB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
IdentID : 09 00 07 00 00 80 51 

Hit ESC to stop autoboot:  5  4  3  2  1  0 
## Booting image at a0080000 ...
   Image Name:   Kernel-Ramdisk-Image
   Image Type:   SuperH Linux Multi-File Image (gzip compressed)
   Data Size:    5867343 Bytes =   5.6 MiB
   Load Address: 80800000
   Entry Point:  80801000
   Contents:
   Image 0:  2970211 Bytes =   2.8 MiB
   Image 1:  2897119 Bytes =   2.8 MiB
   Verifying Checksum ... OK
   Uncompressing Multi-File Image ... OK
found phy at addres = 1
stmac_phy_get_addr(): id1 = 0x7, id2 = 0xc0f1
stb_id = 907008051
   Loading Ramdisk to 80d3c000, length 002c34df ... OK

Starting kernel      nwhwconf=device:eth0,hwaddr:24:00:07:00:80:51 Manufacture=Spark-Project STB_ID=09:00:07:00:00:80:51 - 0x0053d000 - 2897119 ...
and

menu + power

Code:
Board: STx7111-Mboard (MB618)  [32-bit mode]
info: Disregarding any EPLD


U-Boot 1.3.1-g057e7c28 (Oct 21 2011 - 09:58:11) - stm23_0043 - YW 1.0.021 Rel

RAM: 128 MiB
NOR: 8 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
IdentID : 09 00 07 00 00 80 51
Hit ESC to stop autoboot: 5
MB618> printenv
bootdelay=5
baudrate=115200
bootcmd=bootm 0xa0080000
boot_system=spark
kernel_name=spark/mImage
userfs_len=17800000
tftp_kernel_name=mImage
tftp_userfs_name=userfsub.img
userfs_name=spark/userfsub.img
stdin=serial
stdout=serial
stderr=serial

Environment size: 243/131068 bytes
MB618>