Card Focus defect?

[neutrin]

Aseară am făcut upgrade la firmware pe IPBox 910HD (am pus ultimul HDMU), după ceva vreme de la upgrade (10-20 minute) oscam readerul local (internal) cu card focus a incetat să mai funcţioneze, testat inclusiv cu vechiul firmware (păstrez intotdeauna vechiul soft pe altă partiţie pe stick pentru siguranţă). Asta ar putea insemna că ori cardul Focus este dus ori cititorul din IPBox are o problemă (n-am modificat nimic in setările oscam).

Intrebarea mea este: cum aş putea să depistez problema, neavand alt receptor la dispoziţie?
Orice idee este binevenită.

Logul oscam svn8972:

2013/10/14 09:32:26   4B5F18 r focussat [internal] creating thread for device /dev/sci0
2013/10/14 09:32:26   4B5F18 r start reader thread action 8
2013/10/14 09:32:26   4C1B30 r data from add_job action=8 client r focussat
2013/10/14 09:32:26   4C1B30 r focussat [internal] IFD: Opening device /dev/sci0
2013/10/14 09:32:26   4C1B30 r focussat [internal] IFD: Device /dev/sci0 succesfully opened
2013/10/14 09:32:26   4C1B30 r focussat [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
2013/10/14 09:32:27   4C1B30 r focussat [internal] card detected
2013/10/14 09:32:27   4C1B30 r add reader job action 4 queue length 1 focussat
2013/10/14 09:32:27   4C1B30 r focussat [internal] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2013/10/14 09:32:27   4C1B30 r focussat [internal] IFD: Activating card
2013/10/14 09:32:27   4C1B30 r focussat [internal] IFD: Is card activated?
2013/10/14 09:32:27   4C1B30 r focussat [internal] IFD: Reset internal cardreader!
2013/10/14 09:32:30   4C1B30 r focussat [internal] IFD: Waiting for card ATR Response...
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    3B 
2013/10/14 09:32:30   4C1B30 r focussat [internal] IFD: This card uses direct convention
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    24 
2013/10/14 09:32:30   4C1B30 r focussat [internal] ATR historicalbytes should be: 4
2013/10/14 09:32:30   4C1B30 r focussat [internal] Fetching global interface characters for protocol T0
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    00 
2013/10/14 09:32:30   4C1B30 r focussat [internal] TB1: 00
2013/10/14 09:32:30   4C1B30 r focussat [internal] Total ATR Length including 4 historical bytes should be 7
2013/10/14 09:32:30   4C1B30 r focussat [internal] Total protocols in this ATR is 1
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    30 
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    42 
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    30 
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:30   4C1B30    30 
2013/10/14 09:32:30   4C1B30 r focussat [internal] ATR: 3B 24 00 30 42 30 30 
2013/10/14 09:32:30   4C1B30 r focussat [internal] TB1=00 no TD1 means T0
2013/10/14 09:32:30   4C1B30 r focussat [internal] 1 protocol types detected. Historical bytes: 30 42 30 30 
2013/10/14 09:32:30   4C1B30 r focussat [internal] No PTS needed, selected protocol T0, F=372, D=1, N=0
2013/10/14 09:32:30   4C1B30 r focussat [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
2013/10/14 09:32:30   4C1B30 r focussat [internal] Calculated work ETU is 74.40 us
2013/10/14 09:32:30   4C1B30 r focussat [internal] Protocol: T=0, WWT=9600, Clockrate=5000000
2013/10/14 09:32:30   4C1B30 r focussat [internal] Setting timings: timeout=9600 ETU, block_delay=0 ETU, char_delay=12 ETU
2013/10/14 09:32:30   4C1B30 r focussat [internal] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:31   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:31   4C1B30 r focussat [internal] IFD: Setting reader T=0 fs=5000000 ETU=372 WWT=9600 CWT=0 BWT=0 EGT=0 clock=0 check=1 P=5 I=25 U=1
2013/10/14 09:32:31   4C1B30 r focussat [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/10/14 09:32:31   4C1B30 r focussat [internal] IFD: Card succesfully activated
2013/10/14 09:32:32   4C1B30 r focussat [internal] write to cardreader
2013/10/14 09:32:32   4C1B30    DD 26 00 00 03 10 01 40 
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Setting timeout to 12 ETU (892 us)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=892 us
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Transmit:
2013/10/14 09:32:32   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Write timeout 892 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Sending:
2013/10/14 09:32:32   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Transmit succesful
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Setting timeout to 9600 ETU (714240 us)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=714240 us
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Read timeout 714240 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:32   4C1B30    26 
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Receive succesful
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Setting timeout to 12 ETU (892 us)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Transmit size 3 bytes, expected len 2 bytes, delay 0 us, timeout=892 us
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Transmit:
2013/10/14 09:32:32   4C1B30    10 01 40 
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Write timeout 892 us, write delay 0 us, to send 3 char(s), chunksize 3 char(s)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Sending:
2013/10/14 09:32:32   4C1B30    10 01 40 
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Transmit succesful
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Setting timeout to 9600 ETU (714240 us)
2013/10/14 09:32:32   4C1B30 r focussat [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=714240 us
2013/10/14 09:32:32   4C1B30 r focussat [internal] IO: Read timeout 714240 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:33   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:33   4C1B30 r ERROR, function call reader->crdr.receive(reader, data, size, delay, timeout) returns error.
2013/10/14 09:32:33   4C1B30 r focussat [internal] IFD: Setting timeout to 12 ETU (892 us)
2013/10/14 09:32:33   4C1B30 r focussat [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=892 us
2013/10/14 09:32:33   4C1B30 r focussat [internal] IFD: Transmit:
2013/10/14 09:32:33   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:33   4C1B30 r focussat [internal] IO: Write timeout 892 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)
2013/10/14 09:32:33   4C1B30 r focussat [internal] IO: Sending:
2013/10/14 09:32:33   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:33   4C1B30 r focussat [internal] IFD: Transmit succesful
2013/10/14 09:32:33   4C1B30 r focussat [internal] IFD: Setting timeout to 9600 ETU (714240 us)
2013/10/14 09:32:33   4C1B30 r focussat [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=714240 us
2013/10/14 09:32:33   4C1B30 r focussat [internal] IO: Read timeout 714240 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:34   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:34   4C1B30 r ERROR, function call reader->crdr.receive(reader, data, size, delay, timeout) returns error.
2013/10/14 09:32:34   4C1B30 r focussat [internal] TRACE: ERROR: Protocol_T0_Command returns error
2013/10/14 09:32:34   4C1B30 r focussat [internal] card system not supported
2013/10/14 09:32:34   4C1B30 r focussat [internal] Normal mode failed, reverting to Deprecated Mode
2013/10/14 09:32:34   4C1B30 r focussat [internal] IFD: Activating card
2013/10/14 09:32:34   4C1B30 r focussat [internal] IFD: Is card activated?
2013/10/14 09:32:34   4C1B30 r focussat [internal] IFD: Reset internal cardreader!
2013/10/14 09:32:37   4C1B30 r focussat [internal] IFD: Waiting for card ATR Response...
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    3B 
2013/10/14 09:32:37   4C1B30 r focussat [internal] IFD: This card uses direct convention
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    24 
2013/10/14 09:32:37   4C1B30 r focussat [internal] ATR historicalbytes should be: 4
2013/10/14 09:32:37   4C1B30 r focussat [internal] Fetching global interface characters for protocol T0
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    00 
2013/10/14 09:32:37   4C1B30 r focussat [internal] TB1: 00
2013/10/14 09:32:37   4C1B30 r focussat [internal] Total ATR Length including 4 historical bytes should be 7
2013/10/14 09:32:37   4C1B30 r focussat [internal] Total protocols in this ATR is 1
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    30 
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    42 
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    30 
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 800000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:37   4C1B30    30 
2013/10/14 09:32:37   4C1B30 r focussat [internal] ATR: 3B 24 00 30 42 30 30 
2013/10/14 09:32:37   4C1B30 r focussat [internal] TB1=00 no TD1 means T0
2013/10/14 09:32:37   4C1B30 r focussat [internal] 1 protocol types detected. Historical bytes: 30 42 30 30 
2013/10/14 09:32:37   4C1B30 r focussat [internal] No PTS needed, selected protocol T0, F=372, D=1, N=0
2013/10/14 09:32:37   4C1B30 r focussat [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
2013/10/14 09:32:37   4C1B30 r focussat [internal] Calculated work ETU is 74.40 us
2013/10/14 09:32:37   4C1B30 r focussat [internal] Protocol: T=0, WWT=9600, Clockrate=5000000
2013/10/14 09:32:37   4C1B30 r focussat [internal] Setting timings: timeout=9600 ETU, block_delay=0 ETU, char_delay=12 ETU
2013/10/14 09:32:37   4C1B30 r focussat [internal] IO: Read timeout 75000 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:38   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:38   4C1B30 r focussat [internal] IFD: Setting reader T=0 fs=5000000 ETU=372 WWT=9600 CWT=0 BWT=0 EGT=0 clock=0 check=1 P=5 I=25 U=1
2013/10/14 09:32:38   4C1B30 r focussat [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/10/14 09:32:38   4C1B30 r focussat [internal] IFD: Card succesfully activated
2013/10/14 09:32:39   4C1B30 r focussat [internal] write to cardreader
2013/10/14 09:32:39   4C1B30    DD 26 00 00 03 10 01 40 
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Setting timeout to 12 ETU (892 us)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=892 us
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Transmit:
2013/10/14 09:32:39   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Write timeout 892 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Sending:
2013/10/14 09:32:39   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Transmit succesful
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Setting timeout to 9600 ETU (714240 us)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=714240 us
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Read timeout 714240 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:39   4C1B30    26 
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Receive succesful
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Setting timeout to 12 ETU (892 us)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Transmit size 3 bytes, expected len 2 bytes, delay 0 us, timeout=892 us
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Transmit:
2013/10/14 09:32:39   4C1B30    10 01 40 
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Write timeout 892 us, write delay 0 us, to send 3 char(s), chunksize 3 char(s)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Sending:
2013/10/14 09:32:39   4C1B30    10 01 40 
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Transmit succesful
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Setting timeout to 9600 ETU (714240 us)
2013/10/14 09:32:39   4C1B30 r focussat [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=714240 us
2013/10/14 09:32:39   4C1B30 r focussat [internal] IO: Read timeout 714240 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:40   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:40   4C1B30 r ERROR, function call reader->crdr.receive(reader, data, size, delay, timeout) returns error.
2013/10/14 09:32:40   4C1B30 r focussat [internal] IFD: Setting timeout to 12 ETU (892 us)
2013/10/14 09:32:40   4C1B30 r focussat [internal] IFD: Transmit size 5 bytes, expected len 1 bytes, delay 0 us, timeout=892 us
2013/10/14 09:32:40   4C1B30 r focussat [internal] IFD: Transmit:
2013/10/14 09:32:40   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:40   4C1B30 r focussat [internal] IO: Write timeout 892 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)
2013/10/14 09:32:40   4C1B30 r focussat [internal] IO: Sending:
2013/10/14 09:32:40   4C1B30    DD 26 00 00 03 
2013/10/14 09:32:40   4C1B30 r focussat [internal] IFD: Transmit succesful
2013/10/14 09:32:40   4C1B30 r focussat [internal] IFD: Setting timeout to 9600 ETU (714240 us)
2013/10/14 09:32:40   4C1B30 r focussat [internal] IFD: Receive size 1 bytes, delay 0 us, timeout=714240 us
2013/10/14 09:32:40   4C1B30 r focussat [internal] IO: Read timeout 714240 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2013/10/14 09:32:41   4C1B30 r focussat [internal] IO: Receiving:
2013/10/14 09:32:41   4C1B30 r ERROR, function call reader->crdr.receive(reader, data, size, delay, timeout) returns error.
2013/10/14 09:32:41   4C1B30 r focussat [internal] TRACE: ERROR: Protocol_T0_Command returns error
2013/10/14 09:32:41   4C1B30 r focussat [internal] card system not supported
2013/10/14 09:32:41   4C1B30 r focussat [internal] card initializing error

[phys]

Zici ca alt receptor nu ai la indemana, alt card ai ? Macar asa iti dai seama daca e de la cititor.

[neutrin]

Nici card. In ultimă instanţă o să cumpăr un card TVR.

[mariust5]

Eu zic mai bine sa cauti pe cineva aproape de tine sa bagi cardul sa vezi daca e bun ,,, baga si tu locatia ta poate gasim pe cineva .
Sau mai bine cumperi un receptor oficial Focus .. e plin netul . Si faci Update cu el .

[fery21]

Umbla la frecveta cardul pare ok da rateu la clock

[neutrin]

Am incercat cu diverse frecvente: 1 MHz, 2 MHz, 3.57 MHz, cu acelasi rezultat. Poti explica de ce crezi ca e cardul ok? Multumesc.

Offtopic: se pierd caracterele cu diacritice, din posturile scrise in Tapatalk?

[sorin8m]

neutrin, cautama pe mess si te rezolv eu.

[neutrin]

Update: am incercat cardul in două conserve Focus oficiale, in loc să zică "smartcard neimperecheat" zice "smartcard incorect".
E ăsta un semn că e stricat cardul? Aştept păreri.

Mulţumesc!

[startrek1]

e f****t cardu...
chiar daca aparea "smartcard neimperecheat" , receptorul citea sim-ul si puteai sa vezi seria cardului, asa sim-ul este ars iar receptorul nu are ce sa "citeasca" , d'aia apare "smartcard incorect"
daca e cardul tau te duci cu buletinul si ti-l schimba gratis
ps. camd mi s-a ars cardu mie imi aparea la detali card doar siruri de zero

[mariust5]

Pai nu ar zice ,, Card neimperecheat '' pentru ca nu se imperecheaza .. daca zice nerecunoscut e nasol ... daca nu e pe numele tau asta ..

[ASiX88796]

Ba se imperechează. Cardul merge şi in alte receivere dar receiverul nu acceptă alte carduri.

[mariust5]

Eu am Kaon 100SCO oficial de la Focus si am bagat 5 carduri Focus in el , toate merg fara probleme ... nici vorba de imperechere .

[ASiX88796]

Eu am doar 2, ambele pe acelaşi abonament, dacă schimb cartelele intre ele scrie clar: Unpaired Smartcard (asta pentru că am pus eu meniul in engleză).

[mariust5]

probabil e o chestie de soft ... sunt si asa si asa .

[startrek1]

Eu am Kaon 100SCO oficial de la Focus si am bagat 5 carduri Focus in el , toate merg fara probleme

probabil e o chestie de soft ...

ce versiune de soft este pe al tau ?