Uite ca ala @rromcic e si aici. Am mai adaugat cate ceva in scriptul de pornire: auto epg cand schimbi canalul, si programare unele butoane, spre exemplu sleep timer pe TTX/MIX
Sent from my LT30p using Tapatalk
Pentru a instala oscam pe SmartTV Samsung seriile E/F avem nevoie de acces root prin metoda SamyGO.
Rooting widget for F series TV
Download:
1. Widget: Samygo http://yadi.sk/d/GxEVmjPu7ukxk
2. data file: http://yadi.sk/d/zElgQFCY7ulzy
Installation
1. Install skype widget and start it once (check if it starts correctly)
2. Make sure Skype is set to autostart, before closing Skype again.
3. Download archive data and extract it "as is" to root of fat32 USB, attach to TV.
4. Install widget SamyGO (trough develop account in SmartHub)
- Easiest way: SmartHub Widget Manager
5. Start SamyGO widget
6. Press Enter. If you get both Step1 and Step2 OK, then hack is installed.
7. Power off and power on TV
8. Check ftp (port 21) and netcat (port 23 or 1023) connections.
Dupa instalare SamyGO trecem la instalarea oscam pentru asta avem nevoie de un FTP client si Putty instalate pe PC, fisierele de configurare, librariile si executabilul se afla in:
/mtd_rwcommon/oscam
fisiere necesare:
- oscam
- fisiere configurare oscam(config,user,server...)
- libOSCAM.so #v.3
- samyGOso
- samyGOrc #necesar pentru autoswitch channels
- ntpclient
- kill-samyGOoscam
- list_smargo
- samyGOoscam #scriptul de pornire este remodificat cu autozapp down/up/down astfel avem imagine in 18 secunde dupa pornire TV [tks @rromcic]
Code:if [ "$(pidof ${OSCAM})" == "" ]; then echo Starting oscam ${BIN_OSCAM} -c ${DIR_OSCAM} -t ${DIR_OSCAM} & sleep 1 ${BIN_SAMYGORC} -p $INJPID 18 16 sleep 1 ${BIN_SAMYGORC} -p $INJPID 16 18 else
se modifica in /mtd_rwcommon/widgets/user/SamyGO/data fisierul run.sh linia 18 sleep = 0(default = 60)
configurare dvbapi:Code:sleep 0 /mtd_rwcommon/oscam/samyGOoscam
[dvbapi]
enabled = 1
pmt_mode = 6
user = dvbapi #la alegere
boxtype = pc
comenzi Start oscam telnet:
Fisiere necesare:Code:cd /mtd_rwcommon/oscam chmod +x samyGOso oscam ntpclient chmod +x /mtd_rwcommon/oscam/samyGOoscam /mtd_rwcommon/oscam/samyGOoscam
oscam-1.20-unstable_svn9514-arm-v7a8v3r1-linux-gnueabi-libusb-static-samygo.zip
- smartreader 1802 si 0500 stabil
- nu suporta procese emm (WIP)
- nu suporta recording.
---------- Post added at 22:04 ---------- Previous post was at 21:24 ----------
/mtd_rwcommon/widgets/user/SamyGO/data/run.sh
---------- Post added at 15:26 07.07.2014 -------------------Code:#!/bin/sh cd /tmp mkdir /tmp/bin /mtd_exe/InfoLink/lib/unzip -o -P 12345 /mtd_rwcommon/widgets/user/SamyGO/data/data.zip -d /tmp/bin/ chmod 777 /tmp/bin/* /tmp/bin/busybox --install -s /tmp/bin sync export PATH=/tmp/bin:$PATH export LD_LIBRARY_PATH=/tmp/bin:$LD_LIBRARY_PATH sync /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w / & /tmp/bin/remshd & sync /tmp/bin/UEP_killer.sh & sleep 0 /mtd_rwcommon/oscam/samyGOoscam sleep 5 ps | grep run.sh | grep -v grep | while read child_pid others do echo "Killing child process $child_pid of run.sh" kill -9 $child_pid done
07.07.2014 UPDATE
The new firmwares block the root permanently!!!
- T-FXPDEUC-1118 (F7xxx/F8xxx)
- T-MST12DEUC -1120 (F5xxx/6xxx)
Last edited by qwess; 08-02-14 at 21:33.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Uite ca ala @rromcic e si aici. Am mai adaugat cate ceva in scriptul de pornire: auto epg cand schimbi canalul, si programare unele butoane, spre exemplu sleep timer pe TTX/MIX
Sent from my LT30p using Tapatalk
Ai cumva undeva si lista cu tv-urile compatibile?zilele trecute am cam rasfoit forumurile si am aflat ca nu la toate tv-urile din seria e si f merge oscamul
Vreau sa imi iau unul de 32 inchi si nu stiu dupa care model sa ma uit
Mersi
Sent from my SM-N9005 using Tapatalk
Am cautat si eu un 32 insa ele nu au DVB-S2, sau cel putin nu am gasit eu modelul
Processor : ARMv7, nu merge pe procesoare MSTAR
Works with ES7xxx/8xxx (firmwares T-ECPDEUC/T-ECPDAAC and so on) and F7xxx/8xxx (firmwares T-FXPDEUC and so on) models.
Nu merge daca:if your model/firmware contains MST (whose firmware name contains T-MST12xxxx (e.g. T-MST12DEUC))
verifici versiunea de firmware in magazin posibil vanzatorul sa nu cunoasca.
- Using your Samsung remote press the MENU button to open the Main Menu.
- Using the directional arrows select the Support portion of the main menu, and then press ENTER ().
- Using the direction arrows highlight Contact Samsung, and then press ENTER ().
- The current software (SW) / firmware version will be displayed in the pop-up widow.
http://forum.samygo.tv/viewtopic.php?f=51&t=4406
Last edited by qwess; 09-02-14 at 10:43.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Interesant, ma bate gandul ca m am saturat de diablo..
A testat cineva? cum merge ? oscam pe tv..
eu am 2 tv cu tuner dvb-s2 dar ambele seria D..
Vu+Zero4K, Offset Motor 1m
Eu am pe 2 tv-uri de vreo 2 luni, merge perfect. Pe seria D nu sunt solutii
de vreo luna am trecut la root si pot spune ca merge suuuper, probleme (deocamdata) nu poti inregistra si lipsa unui standby activ, serverul e down daca lasi tv-ul oprit, defapt toate serviciile, deci nu poti face un server 24/24 cu reader incorporat, poate ca in viitor scot un widget capabil sa rezolve problema.
"lumina" incepe dupa 16-18 secunde de la pornire TV...initializare smarthub/widgets(samygo, cel responsabil de pornirea oscam)
o alta problema(minora) samygo este legat de skype ceea cel va face sa nu functioneze dupa root
carduri am testat un digi si un tvr, si ceeea ce am observat e ca pe digi am o linie dreapta pe graficul de ecm, mai stabil decat pe receiver 330-350ms, se lucreaza la partea de procesare emm si va fi prezent in curand in trunk svn-oscam.
---------- Post added at 11:35 ---------- Previous post was at 10:53 ----------
stiam deja
Last edited by qwess; 09-02-14 at 10:59.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Vizionaţi „SamyGo Oscam zapp” pe YouTube
Trimis de pe al meu SM-N9005
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
@qwess
Sa inteleg ca ai un 1880?
Nu ai spus ce fel card digi.
Despre stabilitate ECM -cardul de 1880 e stabil pana pe la 800 +400+400+350 =1950ms unde am considerat :
- maxtimecache+traveltime+readertime+fallbacktime
Cat despre necesitatea de a introduce un server in TV nu ii vad rostul.
Sa lasam unui router sau unui raspberry pi sa ne faca de server.
@mark21
Cam diablo e deocamdata superioara din punct de vedere tehnic ( wifi-diablo ) si o poti adapta pe orice fel de tv.
Am sa mut postul in sticky sa fie mai la vedere pentru cei interesati.
DM 800se sim 2.10 , Ibox-cloud, raspberry pi si alte rahaturi
am uitat, e un 1802
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Nu prea se schimba nimic.
Timpiii de raspuns la 1802 sunt mai mici dar paradoxal creste putin timpul maxim fara sa ai freeze.
Oricum acest post merita o atentie in plus.
DM 800se sim 2.10 , Ibox-cloud, raspberry pi si alte rahaturi
oscam-1.20-unstable_svn9524-arm-v7a8v3r1-linux-gnueabi-libusb-pcsc-static-samygo.zip
>>support drivers for pcsc readers (omnikey)
>>support drivers for smartreaders
step 1) pcscd daemon is started? ok turn it off
# killall -9 pcscd
daemon restarts
# /lib/modules
step 2) place on your smartcard reader connected to the USB port and sends
# ./pcscd-df
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam
Procedura din primul psot functioneaza si pe ES-7000 ?
Am instalat widget-ul SamyGO si la pornire afiseaza:
Widget SamyGO to TV F-series
Press Enter for activation SamyGo!
Procedura pentru seria E,
pentru oscam vezi daca este compatibil ->> postul #5
Skype trebuie instalat in prealabil si rulat macar o data cu conectarea automata, daca nu reusesti dezinstalezi samygo +reset to factory si reiei procedura, dupa root-are skype nu va mai fi operativ
update:
http://forum.samygo.tv/viewtopic.php?f=53&t=5797
---------- Post added at 20:41 ---------- Previous post was at 20:07 ----------
pentru editare canale ma impac bine cu Samsung Channel List Editor v.1.0.9
Last edited by qwess; 10-02-14 at 20:34.
Azbox HD with OpenSPA 3.0 powered by OSCam
UE46F8000 powered by SamyGO_OSCam