Update focus

[apoklyps3]

Iata ca dupa o lunga vreme ma aflu din nou in imposibilitatea de a mai face update la cardul focus.
Am incercat cu oscam, chiar si cu metoda oscam+mgcamd care ma salva mereu.
nimic!

am pus si scam , dar nu cred ca face nimic pe gigablue. niciodata nu mi-a functionat aceasta metoda.
am un gigablue 800 se cu openATV 5.0.
a mai patit-o careva?

[apoklyps3]

[global]
logfile                       = /tmp/oscam.log
fallbacktimeout               = 2600
nice                          = -1
maxlogsize                    = 2048
waitforcards                  = 0
preferlocalcards              = 2
dropdups                      = 1
block_same_name               = 0
lb_mode                       = 1
lb_save                       = 100
lb_nbest_readers              = 2
lb_retrylimit                 = 500
lb_max_readers                = 3
lb_auto_betatunnel_prefer_beta= 105
lb_savepath                   = /tmp/.oscam/stat
lb_retrylimits                = 1702:900,098C:1500,1880:600
lb_nbest_percaid              = 1880:3


[anticasc]
enabled                       = 1
numusers                      = 1
penalty                       = 3
aclogfile                     = /tmp/ac.log


[cache]


[newcamd]
port                          = 12010@0B02:000000
key                           = 0102030405060708091014131211
keepalive                     = 1
mgclient                      = 1


[cccam]
port                          = 12000
nodeid                        = CBBA51F6106C157C
version                       = 2.3.0
reshare                       = 2
stealth                       = 1


[dvbapi]
enabled                       = 1
pmt_mode                      = 6
au                            = 1
user                          = gigablue
boxtype                       = dreambox

Asta configul pe care l-am folosit intotdeauna si a mers pana acum.
primeste emm , dau refresh entitlements...nimic.
Am si reincarcat sambata. tot aia.
am incercat si oscam+mgcamd , la fel...
config mgcamd si newcamd :

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }


# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 02 }


# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }


# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0


# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }


# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }


# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30


# network ecm timeout in seconds
K: { 05 }


# newcamd dead routes connect retry, sec
Q: { 600 }


# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }


# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password


# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80


# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log


# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }


# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }


# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }


# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }


# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.0.194 12010 update 1234 01 02 03 04 05 06 07 08 09 10 14 13 12 11

[konstantine]

In receptorul de la focos n-ai incercat?Sau in altul care stie conax...

[apoklyps3]

nu am si nici nu stiu pe nimeni care sa aiba
am mai avut probleme in trecut, dar mereu functiona oscam+mgcamd.

[cristianio]

Eu am trecut la CCcam de la Oscam.
Dar pentru update am un scam cu ceva cifre dupa el.Verific acasa si iti spun.Ideeea este ca pe data de 2 ale luni sa il treci pe acel soft (scam....) selectezi TVR 1 si il lasi ceva timp (eu il las 15 minute) si apoi vezi restul.
Cel mai bun la update la mine a fost Amiko A3.

[apoklyps3]

din ce stiu eu scam nu a functionat niciodata pe gigablue 800 se.
il incerc si pe asta , dar ma indoiesc ca face ceva din moment ce prin oscam+mgcamd primesc EMM shared si tot nu se actualizeaza nimic.

[lao]

Poate e de la versiunea de oscam. Am patit-o recent, pune unul nitel mai vechi.
Nu ai pus cfg de server si de user (dvbapi)
Ce apare acum la entitlement?
Ultimul AU l-am facut cu oscam r10957, anterior lui au fost niste versiuni cu care am avut probleme la AU