updated wetekplay2-masterv1.4-ota-k1-plus
http://myreader.toile-libre.org/uplo...cacba6af59.pdf
Code:Error in /udisk/wetekplay2-masterv1.4-ota-k1-plus-by-belaid38-signed.zip (status 7)
Sh40, AML, prime focus 1,5m si altele ...
updated wetekplay2-masterv1.4-ota-k1-plus
http://myreader.toile-libre.org/uplo...cacba6af59.pdf
I know the procedure this is the result.
Sh40, AML, prime focus 1,5m si altele ...
KI_PLUS_DTV-ota-20161107.195841.V1031P3(PowerVU)
---------- Post added at 13:55 ---------- Previous post was at 13:47 ----------
@zildan
- 1 used sdcard
http://myreader.toile-libre.org/uplo...cacba6af59.pdf
If it stays the same problem Try
- 2 add original file k1 recovery.img and factory_update_param.aml in softw.zip
PowerVU din 07.11.2016
This version is the first version of PowerVU test software, this update is as follows:
1, increase PowerVU function.
2, to optimize the SD program display.
If you are using USB / TF card upgrade, select the Erase Data Partition and Erase Media Partition before upgrading.
KI-PLUS S2+T2 USB/TF ZIP FILES
https://yadi.sk/d/abmq0HP_yGVH5
or
https://mega.nz/#!SkNAja4A!wU7EHv_FG...iRj40_s2_3r7Vw
KI-PLUS S2+T2 IMG FILES
https://yadi.sk/d/9q4Oa_0ryGD5Z
or
https://mega.nz/#!ftU2yDrR!EreJTYdza...Sq1vN7VZvIkHXI
---------- Post added at 16:43 ---------- Previous post was at 15:41 ----------
Code:; =========================================== # POWERVU Key credit to engineer khan15 # ; =========================================== ## An example format ## -> P IDENT Even odd KEY ## -> IDENT = satellite angle + satellite frequency ## -> If the satellite 66E is 660 degrees, it is the hexadecimal 294, make up four, the front zero is 0294 ## -> Suppose the satellite 138E is 1380 degrees ## -> Assuming the frequency is 3845, its hexadecimal is F05, make up four, in front of zero is 0F05 ## -> so together is: 02940F05
Am reusit sa traduc explicatiile din chineza.
Incerc sa introduc ceva key locale .
Sh40, AML, prime focus 1,5m si altele ...
Page 1
KI PLUS S2 PowerVU KEY Instructions for use
1. Enter the digital TV, press the MENU button to display the digital TV menu, select the "Setup" menu, press the OK button to enter.
2. In the installation setup interface, press the "1" key on the remote control 6 times to enter the Smart Data management interface, select PowerVU
Function Press OK to enter.
3. PowerVU key manually add support to add USB and bulk import / export in two ways.
A. Press the red key on the remote control to manually add the PowerVU key.
Page 2
Enter the appropriate parameters, press the OK key to complete the PowerVU key to add.
B. USB bulk import, export PowerVU key.
The file name of the PowerVU key is SoftCam.Key.
Copy the SoftCam.Key file into the USB device, and then access the KI-PLUS box USB interface, in the PowerVU menu
Interface Press the yellow button on the remote control to import the PowerVU KEY in batches.
Enter the satellite parameters
Enter the corresponding KEY
Press on the remote control
Press to enter letters
Page 3
Press the blue key on the remote control to back up the PowerVU key to a USB device.
After the backup USB device will be connected to the computer will see a softcam.key name of the file.
Open the file and display the file format of the KI-PLUS PowerVU key. (The following figure)
Note: If you use other devices softcam.key KI plus file into the box, because the format is not prepared
, There will be satellite after the introduction of the angle and TP display is 0, if you want to show the actual satellite parameters, you can
First import the file into the box, and then back up to KI PLUS format, and then manually modify the satellite on the computer and the angle
TP, and then through the USB into the box. (If you do not want to modify, the use of the function has no effect)
---------- Post added at 19:19 ---------- Previous post was at 19:02 ----------
http://masrawysatlinux.com/t11283.html
Confirm ca merge, dar sacadeaza.
Sh40, AML, prime focus 1,5m si altele ...
Și pe alte receptoare sacadeaza cand merge in paralel emu cu sharingu'.Eu inchid conexiunea la net din receptor si funcționează ok.
key from previous lynkCode:PV 0167300F 00 xxxxxxxxxxxxxx 001 0 W 12303 V PV 0167300F 01 xxxxxxxxxxxxxx 001 0 W 12303 V
Discovery-Networks
Thor1°W- 12303-V-27500
Sh40, AML, prime focus 1,5m si altele ...
Am verificat si merge cu key de forma :
Daca linia contine satelitul si transponderul nu mai necesita ident.Code:PV 0000000 00 xxxxxxxxxxxxxx 001 0 W 12303 V PV 0000000 01 xxxxxxxxxxxxxx 001 0 W 12303 V
Din pacate doar "deschide" nu merge fluent, sacadeaza sau se agata.
E totusi un pas inainte!
Sh40, AML, prime focus 1,5m si altele ...
Azi am facut mai multe teste cu softul din 07.11.2016 si am descoperit ca s-a rezolvat problema cu USALS, in sensul ca nu mai e necesara corectarea coordonatelor sa mute corect antena.
Nu cred insa ca s-a rezolvat si problema cu trecerea prin meniul de motor la intrarea in soft .
Sh40, AML, prime focus 1,5m si altele ...
Se pare ca muta antena fara sa mai treci prin meniul motor.
Scanez de cateva ore satelitii fara "blind", asta va recomand si voua.
Cand scanezi cu blind mai apar prostii.
Sh40, AML, prime focus 1,5m si altele ...
O parere de la baieti
E mai bun k1 plus sau ferguson ariva 4k combo?
Multumesc o zi buna
Inviato dal mio GRACE utilizzando Tapatalk
Mda ! le-a cam trebuit ceva vreme ...
Are ceva sanse pentru DVB-C ?