Noutati italiene

**mark21** · 21-09-23, 18:09

GUARDA LA SERIE A TIM SUI CANALI ZONA DAZN 214 E 215

Su tivùsat c’è anche DAZN con i canali Zona DAZN.

Per te gli oltre 180 canali TV e radio satellitari gratuiti della tua TV di sempre e in più per lo sport hai i canali a pagamento Zona DAZN se hai un abbonamento DAZN attivo*.

scopri di più
*Zona DAZN su tivùsat è un canale fruibile via satellite, acquistabile su dazn.com/tivusat dagli abbonati DAZN attivi. Condizioni di utilizzo, informativa privacy, prezzi e piani di abbonamento, requisiti di connessione, dispositivi supportati e limitazioni del servizio streaming DAZN su dazn.com.

URMĂȚI SERIA TIM PE CANALELE 214 ȘI 215 DAZN ZONE

Pe tivùsat există și DAZN cu canalele Zona DAZN.

Pentru tine, peste 180 de canale TV prin satelit și radio gratuite pe televizorul tău obișnuit, plus pentru sport ai canalele cu plată DAZN Zone dacă ai un abonament DAZN activ*.

află mai multe
*Zona DAZN pe tivùsat este un canal disponibil prin satelit, care poate fi achiziționat pe dazn.com/tivusat de către abonații activi DAZN. Termeni de utilizare, politica de confidențialitate, prețuri și planuri de abonament, cerințe de conectare, dispozitive acceptate și limitări ale serviciului de streaming DAZN pe dazn.com.

**fery21** · 03-02-24, 04:49

Sa rezovat si treaba cu auto update la cardul 183E:

Code:

[reader]
label = Tivusat_183E
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
localcards = 183E:000000,005411
caid = 183E
boxkey = 1122334455667788
rsakey = A92DA72XXXXXXXXXX....XXXXXXXXXXXXXXXXXXXXXXXX8164B5
readtiers = 0
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
ident = 183E:000000,005411
group = 1
emmcache = 1,2,2,0
ratelimitecm = 6206,6205
ecmunique = 1
ratelimittime = 9000
srvidholdtime = 2000

Adaugati in oscam.dvbapi

Code:

oscam.dvbapi

#P: 183E:000000:140E:00EA:03F8 # TVSAT
P: 183D::000000 # TVSAT
P: 183D::6205:4342:10f6:005411 # TVSAT
#P: 183E::6206:4442:115a:005411 # TVSAT
#P: 183E::0078:1400:0000:005411 # TVSAT
#P: 183E::0D4D:1134:0000:005411 # TVSAT
#P: 183E::103E:0C33:0000:005411 # TVSAT
P: 6206::183E:1400:115a:000000 # TVSAT
P: 6206::183E:4442:115a:000000 # TVSAT
P: 183E:6206:0078:1400:0000:000000 #
P: 183E:6206:0078:1400:0000:005411 #

**omul24** · 04-02-24, 06:48

Caid 1856 încă nimic?

**paulino** · 04-02-24, 17:11

Originally Posted by fery21

Sa rezovat si treaba cu auto update la cardul 183E:

Code:

[reader]
label = Tivusat_183E
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
localcards = 183E:000000,005411
caid = 183E
boxkey = 1122334455667788
rsakey = A92DA72XXXXXXXXXX....XXXXXXXXXXXXXXXXXXXXXXXX8164B5
readtiers = 0
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
ident = 183E:000000,005411
group = 1
emmcache = 1,2,2,0
ratelimitecm = 6206,6205
ecmunique = 1
ratelimittime = 9000
srvidholdtime = 2000

Adaugati in oscam.dvbapi

Code:

oscam.dvbapi

#P: 183E:000000:140E:00EA:03F8 # TVSAT
P: 183D::000000 # TVSAT
P: 183D::6205:4342:10f6:005411 # TVSAT
#P: 183E::6206:4442:115a:005411 # TVSAT
#P: 183E::0078:1400:0000:005411 # TVSAT
#P: 183E::0D4D:1134:0000:005411 # TVSAT
#P: 183E::103E:0C33:0000:005411 # TVSAT
P: 6206::183E:1400:115a:000000 # TVSAT
P: 6206::183E:4442:115a:000000 # TVSAT
P: 183E:6206:0078:1400:0000:000000 #
P: 183E:6206:0078:1400:0000:005411 #

La mine tot nu vrea...

**fery21** · 06-03-24, 08:49

Dupa toate mecanismele apicate noile scripturi raman active

#!/bin/bash
wait=3600
oscam_user="USER" # User acces webinfo oscam
oscam_passwd="passwd" # Parola acces webinfo oscam
oscam_port="PORT" # Port webifo oscam actual port
label="tivusat" # Denumire readerv(label)

while true; do
response=$(curl -s -k --user "$oscam_user:$oscam_passwd" --anyauth \
"http://127.0.0.1:$oscam_port/emm_running.html?label=$label&emmcaid=183E&ep=$(curl -s https://pastebin.com/raw/U4eM6DjV)&emmfile=&action=Launch")
if [ $? -ne 0 ]; then
echo "Error in curl request. Exiting..."
exit 1
fi

if [[ $response == *"expected_keyword"* ]]; then
echo "EMM Scris incorect!"
else
echo "EMM Scris corect!"
fi

sleep "$wait"
done

**coco** · 13-03-24, 20:59

@fery21, daca e pus in reader-ul intern e ok asa?

[reader]
label = Tivusat_183E
protocol = internal
device = /dev/sci0
localcards = 183E:000000,005411
caid = 183E
boxkey = 1122334455667788
rsakey = A92DA72FEEAxxxxxxxxxxxxxxxxxC9F4D8164B5
readtiers = 0
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
mhz = 450
cardmhz = 2700
ident = 183E:000000,005411
group = 1
emmcache = 1,2,2,0
ratelimitecm = 6206
ecmunique = 1
ratelimittime = 9000
srvidholdtime = 2000

**fery21** · 14-03-24, 00:44

Nu folosesc ecmheaderwhitelist = 80308ED387,81308ED387, in rest este ok.

**zildan** · 14-03-24, 02:18

E util ecmheaderwhitelist daca mai exista alti provaideri cu acelasi caid.

**fery21** · 14-03-24, 04:23

Pentru moment sunt 3 caid pentru acest providel 183D 183E 1856, cu filtru ecmheaderwhitelist la cardul 183E emm nu vine scris.

**paulino** · 21-03-24, 17:41

Am antena pe 13 grade ,Canale 5, primesc EMM writen,card OK, dar tot nu face AU cardul 183E.

**costynho** · 21-03-24, 19:19

Originally Posted by fery21

Sa rezovat si treaba cu auto update la cardul 183E:

Code:

[reader]
label = Tivusat_183E
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
localcards = 183E:000000,005411
caid = 183E
boxkey = 1122334455667788
rsakey = A92DA72XXXXXXXXXX....XXXXXXXXXXXXXXXXXXXXXXXX8164B5
readtiers = 0
ecmheaderwhitelist = 80308ED387,81308ED387
detect = cd
nagra_read = 1
ident = 183E:000000,005411
group = 1
emmcache = 1,2,2,0
ratelimitecm = 6206,6205
ecmunique = 1
ratelimittime = 9000
srvidholdtime = 2000

Adaugati in oscam.dvbapi

Code:

oscam.dvbapi

#P: 183E:000000:140E:00EA:03F8 # TVSAT
P: 183D::000000 # TVSAT
P: 183D::6205:4342:10f6:005411 # TVSAT
#P: 183E::6206:4442:115a:005411 # TVSAT
#P: 183E::0078:1400:0000:005411 # TVSAT
#P: 183E::0D4D:1134:0000:005411 # TVSAT
#P: 183E::103E:0C33:0000:005411 # TVSAT
P: 6206::183E:1400:115a:000000 # TVSAT
P: 6206::183E:4442:115a:000000 # TVSAT
P: 183E:6206:0078:1400:0000:000000 #
P: 183E:6206:0078:1400:0000:005411 #

Setarile pe care le-ai pus sunt gresite (aici ma refer la ratelimit si Dvbapi) nu cred ca au nici o treaba cu AU. In plus, nu este nevoie de boxkey la readerul tivusat, e suficient rsakey. Momentan sunt 3 moduri de a face AU: manual, cu scriptul pus de tine si cu Oscamul compilat de Samur. Cel mai important e ca adresa "https://pastebin.com/raw/U4eM6DjV" sa fie functionala (momentan e ok).

**paulino** · 21-03-24, 20:14

A plecat.Multumesc de ajutor!

**fery21** · 22-03-24, 06:34

@costynho
Versiunea expusa era pentru o versiune de oscam-test in care erau presetate piduri.

@paulino
Linia ta era setata in netcard care face au fara probleme (dar nu mai e activa linia de la tine)

Acesta este un script daca este rulat in enigma2 au server linux garateaza emm corect in timp
pentru a rula aveti nevoie de curl instalati: "opkg install curl" pentru enigma2 "apt install curl" petru servere linux

#!/bin/bash
wait=3600
oscam_user="" # Replace with the actual oscam web user
oscam_passwd="" # Replace with the actual oscam web passwd
oscam_port="" # Replace with the actual oscam web port
label="tivusat"

while true; do
# Use double quotes around variable references
response=$(curl -s -k --user "$oscam_user:$oscam_passwd" --anyauth \
"http://127.0.0.1:$oscam_port/emm_running.html?label=$label&emmcaid=183E&ep=$(curl -s https://rentry.co/ognzc/raw)&emmfile=&action=Launch")

# Check for errors in the response
if [ $? -ne 0 ]; then
echo "Error in curl request. Exiting..."
exit 1
fi

# Optionally, you can check the content of the response
# For example, check if the response contains a specific keyword
if [[ $response == *"expected_keyword"* ]]; then
echo "EMM Scris incorect!"
else
echo "EMM OK!"
fi

sleep "$wait"
done

**coco** · 31-03-24, 19:39

@fery21

scriptul trebuie cumpletat cu user, pasword si port asa:

#!/bin/bash
wait=3600
oscam_user="" # user2
oscam_passwd="" # passwd2
oscam_port="" # 1200
label="tivusat"

while true; do
# Use double quotes around variable references
response=$(curl -s -k --user "$user2:$passwd2" --anyauth \
"http://127.0.0.1:$1200/emm_running.html?label=$label&emmcaid=183E&ep=$(curl -s https://rentry.co/ognzc/raw)&emmfile=&action=Launch")

# Check for errors in the response
if [ $? -ne 0 ]; then
echo "Error in curl request. Exiting..."
exit 1
fi

# Optionally, you can check the content of the response
# For example, check if the response contains a specific keyword
if [[ $response == *"expected_keyword"* ]]; then
echo "EMM Scris incorect!"
else
echo "EMM OK!"
fi

sleep "$wait"
done

sau asa:

#!/bin/bash
wait=3600
oscam_user=user2
oscam_passwd=passwd2
oscam_port=1200
label=tivusat

while true; do
# Use double quotes around variable references
response=$(curl -s -k --user "$user2:$passwd2" --anyauth \
"http://127.0.0.1:$1200/emm_running.html?label=$label&emmcaid=183E&ep=$(curl -s https://rentry.co/ognzc/raw)&emmfile=&action=Launch")

# Check for errors in the response
if [ $? -ne 0 ]; then
echo "Error in curl request. Exiting..."
exit 1
fi

# Optionally, you can check the content of the response
# For example, check if the response contains a specific keyword
if [[ $response == *"expected_keyword"* ]]; then
echo "EMM Scris incorect!"
else
echo "EMM OK!"
fi

sleep "$wait"
done

care e corect prima sau a doua, multumesc

**fery21** · 31-03-24, 19:57

Desigur daca citesti cu atetie este scris (scuze daca este in engleza)

oscam_user="" # Replace with the actual oscam web user
oscam_passwd="" # Replace with the actual oscam web passwd
oscam_port="" # Replace with the actual oscam web port

Nici una nu este corecta

Nu trebue schimbat nimic inafara de user passwd port oscam

Code:

response=$(curl -s -k --user "$oscam_user:$oscam_passwd" --anyauth \
                "http://127.0.0.1:$oscam_port/emm_running.html?label=$label&emmcaid=183E&ep=$(curl -s https://pastebin.com/raw/U4eM6DjV)&emmfile=&action=Launch")

127.0.0.1 schimbi in cazul in care doresti sa rulezi script in remote la un oscam.

Daca aveti dificulati , intrebati de aia suntem aici, deci @coco ce ai postat, editat este total gresit.

Thread: Noutati italiene

Thread Tools

Display

Posting Permissions