Thanks:
0
Likes:
0
Dislikes:
0
-
Standard RSP member
- Rep Power
- 0
Re: AzBox HD
nu exista suport pt BD, cel putin nu inca.
-
Golden Member
- Rep Power
- 65
-
Member
Visitor
- Rep Power
- 0
Re: AzBox HD
Cine ma ajuta si pe mine sa fac un AZBOX PREMIUM HD sa merga pe focussat.Sa-mi explice ca la prosti pas cu pas multumesc
-
Standard RSP member
- Rep Power
- 58
Re: AzBox HD
Instalezi din plug-ins/manual install newcs.tgz si mgcamd.tgz si apoi cu ftp :
1)in newcs modifici <mhz>358</mhz>
2)in mgcamd creezi un fisier newcamd.list in care scrii :
CWS = 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan local
CWS_INCOMING_PORT = 12000
Dai 755 peste tot , activezi(fara #in fata) newcs si mgcamd + start/buton galben . Bagi cartela contactele in jos si vezi daca merge ; poate vers. asta de newcs stie conax .... la mine merge perfect via tvr hd , n-am focus sa testez .
-
Standard RSP member
- Rep Power
- 0
Re: AzBox HD
Am si eu o problema cu un Premium HD va rog sa ma ajutati,am instalat Mgcamd deschide toate canalele in afara de gigi,cheile sunt bune.Ce poate sa fie,cu MultiCas deschide dar as dori sa folosesc Mgcamd.Am ultimul firmw.instalat 2238.Multumesc.
-
Standard RSP member
- Rep Power
- 58
Re: AzBox HD
Gigi functioneaza perfect pe chei cu mgcamd si softcam.key daca ultimul contine cheile corecte . Acestea pe obtin cu plugin-ul SCDXCas care se gaseste pe serverul dedicat _www.descargas.azboxhd.es . Pentru a intra pe acest server trebuie editata una din cele 4 adrese din optiunea manual install din interiorul OPENXCas .
-
Golden Member
- Rep Power
- 65
-
Re: AzBox HD
@qazual
Scuze de offtopic , dar te rog eu vorbeste romaneste nu te mai da rotund ca stii italiana .
ok?
sau daca tot vrei sa vorbesti italiana vorbeste la sectiunea http://sateliti.info/forumdisplay.php?f=42
Last edited by Snow; 21-06-09 at 14:25.
Reason: quote
-
Golden Member
- Rep Power
- 65
-
Golden Member
- Rep Power
- 65
Re: AzBox HD
AzboxHD 0.9.2371
Release Notes
Fixed
- From software 2163 wifi wep 64/128bit doesn't work anymore.
Fixed
- At HDMI mode -> changing the display format (fullscreen, Pillarbox, Pan & Scan),
the video resolution changes to 576p - the output matches no longer with video-resolution in settings.
Fixed
- SCART -> the output is generally Macrovision protected, even at programs that are not protected.
So Recordings via Scart are not possible.
Fixed
- SCART -> If you choose RGB-Signal, you have no output on HDMI at the same time
Fixed
- SCART -> Changes at display format will lead to green-screen followed with picture loss - reboot required!
Fixed
- AT network Services Menu - The displayed name is the current status,
therefore please rename in activated (instead of activate) and disabled (instead of disable)
Fixed
- USALS-Settings are deleted after reboot
Fixed
- Subtitles are not in accordance with the spoken sentence, they stay until the next subtitle appears.
The subtitle fits naturally no longer the situation. They should disappear
Fixed
- AzBox loose memory of historical navigation when change favorite folder or when jump between satellites
Fixed
- When you delete channels from the genre lists, the channel will be completely erased, not just the genre-labeling
Fixed
- In MKVs should be used the yellow button to change the sound, and Red button to select over Subtitles, as in TV menu,
instead of clicking through.
Fixed
- VOB Files are not working(File extension should be .vob)
Fixed
- If you enter text which is longer than entry field, you can't see what you are entering, because text doesn't scroll
Fixed
- Renaming files in ftp is buggy, if you do rename in detail menu for a file which is on ftp.
You can't exit the rename option only with home button
Fixed
- YOUTUBE: Timeline works not properly - longer as necessary
Added
- When adding a record from EPG, at reserved recording list there is no option to edit the timing.
(Like start X minutes before and stop Y minutes later, from the EPG time).
http://rapidshare.com/files/24752515...h_0.9.2371.rar
imi pare rau nu pot urca pe upload
-
-
Standard RSP member
- Rep Power
- 82
sBox beta 0.0.3 in azbox HD
sBox beta 0.0.3 in azbox HD
CONFIGURACION DEL HELDER
sbox+mbox
sbox card reader:
[main]
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=1 # 0=no log 1=log to /tmp/sbox.log
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=01020304050607080910111213 14 # newcamd deskey
port=35000 # newcamd port
users=mbox:mbox:1 # newcamd userass:au
[slot1]
active=0 # 0=inactive 1=active
sci=/dev/sci1 # upper
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=01020304050607080910111213 14 # newcamd deskey
port=15051 # newcamd port
users=dummy:dummy:1,dummy1:dummy1 :0 # newcamd userass:au
[slot2]
active=0 # 0=inactive 1=active
sci=/dev/tts/0 # phoenix interface
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=01020304050607080910111213 14 # newcamd deskey
port=15052 # newcamd port
users=dummy:dummy:1,dummy1:dummy1 :0 # newcamd userass:au
[your camid in hex] # nagra2 camid
rsa=your rsa# rsa "n" from this card (like newcs)
boxkey=your boxkey # boxkey from this card
emm=0 # 0 = bloker abierto
[AAAAAAAA] # seca camid
ok_view=1 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0 = bloker cerrado
[NewCamd]
#server0=dummy:dummy@localhost:15 050/0102030405060708091011121314
#server1=dummy:dummy@localhost:15 051/0102030405060708091011121314
#server2=dummy:dummy@localhost:15 052/0102030405060708091011121314
http://www.megaupload.com/?d=76OVRLOD
AB IPBOX 9000HD
DVB/S2-CABLE TUNER
-
Standard RSP member
- Rep Power
- 58
Re: AzBox HD
Nu e pt. azbox : nu contine fisier sbox_module .
-
Standard RSP member
- Rep Power
- 58
Re: AzBox HD
Sbox.mips foloseste libs az , deci trebuie redenumit sbox_module si poate fi folosit .
-
Golden Member
- Rep Power
- 65
Re: AzBox HD
AzBox CAM Wizard v.1.0
This application is created for beginners and for well skilled users which want\'s to setup all needed CAM\'s faster in new AzBox HD.
After installation of this application, CAM\'s are ready to be installed in AzBox, but to be sure that You have newest versions of CAM\'s, from time to time
it is recommended to make an OnLine Update ( if you have internet connection ).
New Versions of CAM\'s will be saved on Your PC, and will be accessible on every next startup of application.
In application there is attached few localizations ( language files ), but also You can store translation by this way:
In Folder where AzBox Cam Wizard is installed, You will find file with name: Lng_Default.ini. You can change word default with name of Your language.
Now, Edit that File, You will see default messages showed on English language. If You want to translate, on each end of message on English You should add /// ( 3 slash ),
and after that Add your translation of that message, so do not delete messages on English, just add /// and put after that Your translation.
So it should looks like this :
Original message /// Translated message
I would like to say thanks with help of testing and creation of this Application to :
iPod ( NeotionBox ), Roger Rabbit, and all others who helped me to make this application.
This application dont contain any kind of Key\'s and nothing which is connected with illegal watching of Pay TV Channels.
This is just Cam Wizard which should help all beginners or normal users ( technicians, sellers in shops ) to set-up new AzBox HD without any problem.
It is up to you, end users, will You cross the legislative and Use this Installer in illegal operations.
rgs,
http://rapidshare.com/files/24982852...CAM_Wizard.rar
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules