1. set the DM600 in standby
2. copy the the files (buildimage, build-nfi-image.sh, mkfs.jffs2) to /usr/bin
3. Change fileattributet to 755 on this files


To make a .nfi Image off your DM600 to hdd
Start a telnet session against your DM600 and write:

build-nfi-image.sh /media/hdd


Exempel Telnet window
root@dm600pvr ~ # build-nfi-image.sh /media/hdd
dm600pvr found
***
download secondstage-dm600pvr-53.bin
create boot.jffs2
create root.jffs2
create secondstage
create dm600pvr nfi-image
nfi-image create on /media/hdd/backup_image_dm600pvr20071007.nfi
***
root@dm600pvr ~ #

Backupen is finished (it takes about 2-3 minutes)

lb romana ( google translate ) :
1. set de DM600 in regimul de aşteptare
2. copiaţi fişierele (buildimage, build-nfi-image.sh, mkfs.jffs2) la / usr / bin
3. Modificare fileattributet la 755 de pe acest fisiere


Pentru a face o. Nfi imagine de pe hdd pentru a vă DM600
Porniţi o sesiune telnet DM600 impotriva ta şi scrie:

build-nfi-image.sh / media / hdd


Exempel fereastra Telnet
root @ dm600pvr # ~ construi-nfi-image.sh / media / hdd
dm600pvr găsit
***
Descarca secondstage-dm600pvr-53.bin
crea boot.jffs2
crea root.jffs2
crea secondstage
crea dm600pvr nfi-imagine
nfi-crea pe imagine / media/hdd/backup_image_dm600pvr20071007.nfi
***
root @ dm600pvr ~ #

Backupen este terminat (este nevoie de aproximativ 2-3 minute)