Hello Everyone,
We are proud to announce that our new E2 plugin is now ready.
There are 3 common methods for installation of ipk files (E2 plugin)
a. Connect your E2 device with Putty or DCC.
1. Telnet Methods:
b. Go to FTP and copy one of this plugin on /tmp/ folder.
c. Go to Telnet and Copy and paste one of this command.
opkg install /tmp/XtreamTV_0.0.1_armv7a.ipk
opkg install /tmp/XtreamTV_0.0.1_mips32el.ipk
opkg install /tmp/XtreamTV_0.0.1_mipsel.ipk
opkg install /tmp/XtreamTV_0.0.1_sh4.ipk
2. FTP Methods:a. Download the plugin (downwold the attachment) and connect your E2 device with Putty or DCC
b. Go to FTP and copy one of this plugin on /tmp/ folder
c. After copy the ipk file to E2 device (tmp folder) from E2 device follow the demonstration (this is for old Gemini but same principal apply to all images)
3. DCC - Upload Packages Method
Information about which you version you need to install on boxes:
- Mips32el is used for the most boxes. Example VU zero, Vu+ Duo, Zgemma and mostly above openpli 4 boxes or new images.
- Mipsel is used for old boxes DM800 clones with old openpli 2.1
- sh4 is used for boxes like spark
- armv7a is used by new boxes like Vu+ 4k and gigablue sf4008
So most used and strongly suggested is using the mips32el.
When you have it installed the plugin should appear in the menu called XtreamTV, open this and there will be an MAC written. This MAC you can write inside your panel, after that you can verify the box.
N.B. Before you install our plugin please remore old XtreamTV plugin from your device. If you want to remove the plugin from the box, write this code on Telnet opkg remove XtreamTV
After installation please reboot your device. All is done. In plugin section you find "XtremeTV"
Enjoy.
https://www.mediafire.com/file/vxtkm...vxd/plugin.zip
&
https://www.mediafire.com/file/3axf7...DCC_E2_150.zip
---------- Post added at 23:42 ---------- Previous post was at 23:26 ----------
after you need to add mak adres from your reciver same like mag iptv box in the panel